Curipeer ANITA Series Kids Table and Chair Set User Manual
- September 5, 2024
- Curipeer
Table of Contents
Curipeer ANITA Series Kids Table and Chair Set
Product Specifications
- Product Name: ANITA SERIES KIDS’ TABLE & CHAIR SETS
- Max Weight Capacity: 44lbs per table, 66lbs per chair
Assembly Instructions
Table Assembly
- Start assembling the table by following the parts list provided in the manual.
- Use the screws provided to attach the boards together as instructed.
- Ensure that the groove lines on the boards are aligned correctly for proper installation.
Chair Assembly
- Begin assembling the chairs by following the parts list and assembly instructions.
- Attach the components together using the specified screws and pay attention to the direction of the holes for smooth assembly.
Frequently Asked Questions (FAQ)
-
Q: What is the weight capacity of the table and chairs?
A: The table has a maximum weight capacity of 44lbs, while each chair can support up to 66lbs. -
Q: How many chairs are included in the set?
A: The set includes two chairs. -
Q: Are assembly tools included with the product?
A: Yes, all necessary tools and screws for assembly are included in the package.
ANITA SERIES
KIDS’ TABLE & CHAIR SETS
WARNING : Assembly by an adult.
Guide of Manual
- Thanks for your choice. We will do our best to provide customer service for everyone.
- Please check to make sure all parts are included as stated when you unpack. If there are parts missing or wrong, please contact us, we will expeditiously provide reissue accessories, compensation or other services.
- Instruction should be read carefully. But the manual may not cover every detail of all possible situations and steps.
- Please contact us if further information and help are needed. We will respond in a timely manner. * Please be patient that the other items are on the way if you buy more than one product.
Warning
- It’s kindly advised to assemble this product on a carpeted floor to protect it from being scratched.
- Small parts are included. Please keep the product away from children while assembling. Do not let children play or jump on the product.Do not stand on the item or use as a step ladder.
- Please pay attention to the sharp corners during assembly. We recommend the use of gloves to prevent the undesired injury.
- Prior to use, please check to see if there’s any loosening screw or part. Make sure that each screw and part is correctly installed and securely fastened.
- Power tools are usually not required. Please at a low gear if you need.
Care and Maintenance
- Use a soft, clean cloth that will not scratch the surface when dusting.
- There’s no need to use furniture polish. If you need, test it first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
- Liquid spills should be removed immediately. Gently blot the spill with a soft clean cloth to avoid rubbing.
Further Advice about the Furniture Care
- It is best to keep your furniture in a climate-controlled environment.
- We recommend to keep furniture from sunlight exposure to avoid possible surface damage.
- Following these important and helpful tips will help retain your furniture’s performance even when it ages.
- Periodically (every 90 days) make sure the screws are fully tightened.
MATERIAL : MDF
MAX WEIGHT CAPACITY: 44LBS/TABLE 66LBS/CHAIR
Parts List & Assembly Instruction
- Make sure all parts are in the package.
- “+” in below list indicates that additional pieces are replacement parts.
Screw A into the holes of the boards numbered 2) (3 4 16 for later use.
Tips : The thick lines in the figure are the groove lines on the board
for identifying the correct direction during installation.
(Start assembling the chairs)
Two chairs completed Installation Complete
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>