OAKHAM P1301986 Wave Pattern Three Door Shoe Cabinet Installation Guide

: September 2, 2024
: OAKHAM

Table of Contents

P1301986 Wave Pattern Three Door Shoe Cabinet
Product Specifications
Product Usage Instructions
Adjusting the Door
Assembly Videos
Safeguarding Furniture
Support and Assistance
- FAQ
Q: How do I adjust the door if it is crooked?
Q: What should I do if the doors overlap?

P1301986 Wave Pattern Three Door Shoe Cabinet

“`html

Product Specifications

Model: X27
Dimensions: 20 X 36 X 6 inches
Weight: X4 lbs
Material: Not specified

Product Usage Instructions

Adjusting the Door

To adjust the door and address gaps or misalignment, follow
these steps:

Turn internal & external screw to the right to make the
door approach inside.
If the doors overlap, turn the internal & external screw to
the left.
If the door is crooked, rotate the front and rear screws
accordingly.
If the top or bottom of the door is tilted outward, adjust the
internal & external screws in the respective direction.
If the door is higher or lower on one side, adjust the up &
down screws accordingly.

Assembly Videos

For visual guidance on assembly and adjustment, refer to our
assembly videos available at https://oakhamdesign.com/pages/assembly-videos.

Safeguarding Furniture

To prevent scratches on your furniture during assembly, assemble
on a carpeted surface.

Support and Assistance

If you encounter any issues during assembly, visit our website
or contact our support team at care@oakhamdesign.com for quick
solutions.

FAQ

Q: How do I adjust the door if it is crooked?

A: Rotate the front and rear screws as instructed in the manual.
If needed, push the door gently towards the cabinet.

Q: What should I do if the doors overlap?

A: Turn the internal & external screws to the left to adjust
the overlap between the doors.

“`

X27 X3 K X2 P X12

X27

20 X

8×30mm

X6

3.5×12mm

X4

36 X

4×14mm

X6

I X2

J 2 4×15mm

X

4×35mm

L X2

M X14 14 N X 3×16mm

O X27

Q X2

4×40mm

A

×15

Step 2

A

×5 I

×2 L

×2

Step 3

B

×7

C

×4

Step 4

Step 5

B

×2

C

×2

C

×2

Q

×2

Step 6

Step 7

B

×10 C

×6

A

×7

Step 8

Step 9

B

×6

C

×6

Step 10

Step 11

E

×4

O

×22

P

×12

Step 12

D

×6

H

×6

G

×12 F

×3

Step 13

Step 14

G

×24

M

×14 N

×14 B

×2

O

×5

Step 15

care@oakhamdesign.com

Adjusting the door
· Before adjusting the hinge, please check whether the cabinet is skewed.
· If the skew can not be repaired, please remove the anti-tipping device first, then adjust the cabinet to vertical position.
· Please adjust the hinge with the door open.
· Please operate it with more than 2 people, one person holds the door and the other one adjusts the screw.
· Have trouble adjusting the door? Please check out our video on adjusting the door via our website or contact care@oakhamdesign.com !

Components Name ijThe door side ij

Obvious gaps between doo orDoos don’t look closed

] Turn “internal & external screw” to the right can make the door approach inside.
Please adjust the doors little by little. :–T–u–r–n—-ri–g–h—-t,

– I iii

8

ii+-

If the 2 doors ae overlap, please turn the “internal & external screw” to the left.
P.10

When door is crooked
:·.-tPol-e-aa-ds-eju-st-at-fki-ers-tt-.h-e–fo-ll-o-w-i-n-g-s-te-p–s -.J,l

https://oakhamdesign.com/pages/assembly-videos

: OJ Rotate the “front and rear screws” to the left

‘ ] Push the door to the cabinet

Ad’1nolltoeerrrnasaldillju&dsetoinxetges rtnnhaoelt sc’cf’rhoeanwnta’nteod,treeleaarrigssehctrteSuwlrignh”,ttthlhyee.
(J] Turn “internal & external screw” to the
left can make the top of the door tilted outward.

2 2 2

f otate the “front and rear screws” o the right

: (J] Turn “internal & external screw” to the
‘ left can make the bottom of the door tilted outward.

m 9 H

@ j

[Protruding tohe underside) When the doois highe on to2

Turn “up & down screw” to the left

ssLaoomwtheearththe2eidgdhotoo. rosr’asreheoi1thhte
tl

‘ Turn “up & down screw” to the right

‘

If the door is lower on bottom, please lift up the left door slightly on step 2
P.11

https:1/oakhamdesign.com/pages/assembly-videos
Stay Scratch-Free: Safeguard Your Furniture by Assembling on Carpet.
·
Stuck in Assembly Limbo? Check out our website or contactour support team for quick solutions!
·00
P.12