Limens RM-CR Cam Connect Pro User Guide

Limens RM-CR Cam Connect Pro

Specifications

• Product: Yamaha RM-CR Signal Processor
• Power Source: POE (Power over Ethernet)
• Compatibility: RM-TT, CamConnect Pro (AI-Box1 FW 1.7.18 or later version)

Product Usage Instructions

Powering On

Use POE to power on the RM-CR and RM-TT devices.

Setting Up Yamaha Devices

1. 1. Login to the Yamaha RM-CR Webpage by entering the RM-CR IP address into a browser and logging in with the provided password.

2. Connect RM-TT with RM-CR:
3. Go to the Setting and Peripheral page.
4. Press SEARCH to find Yamaha devices in the same subnetwork.
5. After finding the device, press ADD to connect it with RM-CR.
6. Once the Yamaha device is connected to RM-CR, the status will show as connected.

CamConnect Pro Settings

To configure CamConnect Pro (AI-Box1):

1. 1.       1. Pull down the Device item and select [Yamaha RM-CR].

   2. Enter the IP address of Yamaha RM-CR.
   3. Set the Audio Trigger Level to 50dB (default value may change in future versions).
   4. Switch the [Connect] button to connect with Yamaha RM-CR.

FAQs

Q: How do I power on the Yamaha RM-CR and RM-TT devices?

A: Use POE to power on both devices.

Q: How do I connect RM-TT with RM-CR?

A: Follow the steps mentioned in the user manual: Search for Yamaha devices, and add the found device to connect with RM-CR.

Q: How do I configure CamConnect Pro with Yamaha RM-CR?

A: Follow the steps provided under the CamConnect Pro Settings section in the user manual to configure the settings.

Download RMDeviceFinder

https://info.uc.yamaha.com/rm-device-finder

Find Device IP by RMDeviceFinder

Yamaha RM-CR signal processor Setting

Set up Yamaha devices

• Use POE to power on RM-CR, and RM-TT.

Login to Yamaha RM-CR Webpage

• Enter the RM-CR IP address into a browser.
• Type the password into the login window, and then click the [LOGIN] button.

Connect RM-TT with RM-CR

• Step 1: Go to the “Setting” and “Peripheral” pages.
• Step 2: Press “SEARCH” to find Yamaha devices in the same subnetwork.
• Step3: After finding the device, press ”ADD” to connect a device with RM-CR
• Step4: After the Yamaha device finishes connecting to RM-CR, it will show the status “connected”.
• Now, we could move to CamConnect Pro to do the setting.

Microphone Status

• Go to the “ Audio” “Input” tab
• Dante Received channel No. matches CamConnect Pro. Array No.

CamConnect Pro (AI-Box1) Settings

Support Device & Settings (AI-Box1 FW 1.7.18 or later version)

1. Pull down the Device item and select [Yamaha RM-CR]
2.  Enter the IP address of Yamaha RM-CR
3. Set the Audio Trigger Level to 50dB. (The next version will change the default value)
4.  Switch the [Connect] button to connect with Yamaha RM-CR

MORE INFO

Thank You!

• MyLumens.com
• Contact Lumens

References

• Lumens – Pro AV Technology | Lumens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>