Trivedi Advanced Technologies M700A TempTag Gateway Instructions
- August 29, 2024
- Trivedi Advanced Technologies
Table of Contents
Trivedi Advanced Technologies M700A TempTag Gateway
Product Information
Specifications
- CPU : Quad-core Cortex-A7 1.2 GHz
- RAM : 512 MB
- eMMC : 4 GB
- Frequency Bands : US915/EU868/AU915/AS923
- Interfaces : 10M/100M RJ45 Ports x 1, Multi-Channel LoRaWAN wireless, WiFi 802.11 b/g/n (2.4GHz)
- Sensitivity : -140dBm
- Max Output Power : 27 dBm
- Power Input : 5V, 2A DC adapter
- Features : LoRaWAN Gateway, Allows customizing LoRaWAN regional parameters, Auto-provisioning for batch deployment and management, Pre-configured to support different LoRaWAN regional settings, Remote Monitoring
Product Usage Instructions
-
Setting up the TempTag M700A Gateway
Connect the M700A Gateway to a power source using the provided DC adapter. Ensure the Gateway is within range of a WiFi network or connect it via Ethernet to an IP network. -
Configuring LoRaWAN Settings
You can customize the LoRaWAN regional parameters on the M700A\Gateway to align with the requirements of your specific region. The Gateway comes pre- configured with different LoRaWAN frequency bands. -
Remote Monitoring
To enable remote monitoring, ensure the Gateway is connected to the internet and accessible. System Integrators can easily monitor and maintain the Gateway remotely.
The TempTag M700A is aLoRaWAN Gateway. It lets you bridge the LoRa wireless network to a network via WiFi, and Ethernet. The M700A is fully compatible with the LoRaWAN protocol. It supports Basic Stationprotocol. M70A supports AWSLoRaWAN Server and Plumsense Portal.Different countries use different LoRaWAN frequency bands. M700A has these bands pre-configured.TempTag M700A supports remote management. System Integrator can be easy to remotely monitor the gateway and maintain it.
TempTag M700A Gateway
Specifications
Hardware System| CPU: Quad-core Cortex-A7 1.2 GHz
RAM: 512 MB
eMMC: 4 GB
Frequency Bands| US915/EU868/AU915/AS923
Interfaces and Connectivity| 10M/100M RJ45 Ports x 1
Multi-Channel LoRaWAN wireless WiFi 802.11 b/g/n (2.4GHz) Sensitivity: -140dBm
Max Output Power: 27 dBm
Power Input| 5V, 2A DC adapter
Features| LoRaWAN Gateway
Allow customizing LoRaWAN regional parameters
Auto-provisioning for batch deployment and management
Pre-configured to support different LoRaWAN regional settings Remote Monitoring
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
FAQ
Q: Can the TempTag M700A Gateway be used in all countries?
A: The M700A Gateway supports different LoRaWAN frequency bands pre-configured
for specific regions. Ensure compatibility with your country’s frequency band
before use.
Q: How can I access the Plumsense Portal with the M700A Gateway?
A: The M700A Gateway supports Plumsense Portal access. Follow the user manual
instructions to set up and configure access to the portal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>