enabot ROLA Mini Companion Robot User Manual
- August 28, 2024
- enabot
Table of Contents
**enabot ROLA Mini Companion Robot User Manual
**
Safety Information
Please read the ollowing safety instructions careully and take normal safetyprecautions before using this product.
- Only authorized technicians can disassemble the product. Users should not try this themselves.
- Remove the protective film from the product before use to ensure normal operation of the robot.
- To avoid damage from falling, do not place the robot in places where it may fall, such as tables, coffee tables, TV cabinets, etc.
- Do not use the robot in an environment with open flames, fragile items, or flammable items.
- Do not drop or kick the product.
- Avoid using the product on wet floors, such as bathrooms or near kitchen sinks.
- Only use the product in an environment with the temperature between -10°C and 45°C.
- Ensure that the Wi-Fi signal covers the product’s range of activity.
- Avoid excessively bending wires and placing heavy or sharp objects on the product.
- Do not let pets bite the product’s wires, as it may cause pet safety hazards.
- Any operation inconsistent with the instructions may cause damage to the product.
- The main unit of this product cannot be immersed or soaked in water.
- This product must be charged with a power adapter of 5V output voltage and an output current of no less than 2A.
- If using a power adapter to supply power, please purchase a power adapter that meets the corresponding safety standards.
- Operation of this device in the band 5150-5250MHz/5250-5350MHz is restricted to indoor use only.
Packaging
ROLAMini Companion Robot
Charging Cable
Instruction Manual
Pin
Product Introduction
| Status Indicator Light
Blue Steady: recording
Green Flashing: charging
Green Steady: fully charged
Red Flashing; network anomaly
---|---
| Voice button
Short press: voice call
Hold for 3 seconds (when off): power on
Hold for 5 seconds (when on): power off
Networking Instructions
-
After the robot i turned on, the indicator lights start blinking, The robot has now entered the QR-code binding sate.
-
Download the ROLA App, click “Add Device” or “+* on the home page, and follow the steps to prepare your robot for network access. Please pay careful attention and filin the correct WI-Fl name and password. After generating the QR code, scan the code about 15-20cm away from the robot to connect it with the network.
-
When the robot has successfully connected to the network, it will emit a successful binding sound and the App willalert you that the binding is successful.
Usage Instructions
Robot charging
-
It is recommended to charge the robot when using it for the first time. When charging, just connect the magnetic connector of the charging cable.
-
Fix the charging cable to the wall or the ground and fix the robot to the ground while charging.
SD Card Installation
Make sure the robot is powered off. Open the wheel lock and remove the wheel
to expose the SD card slot. Insert the SD card into the slot as shown. The SD
card read and write speeds should be no less than U1/Class 10.
Restore Factory Settings
Hold the reset button on the bottom of the robot for 5 seconds. When you hear
the “ROLA Fine” prompt tone, reconnect to the network.
Expansion Accessory Installation
(“Expansion accessories must be purchased separately) Insert the male end of
the expansion accessory into the accessory socket on the top of the robot.
Slide forward to lock it in.
Specifications and Parameters
Product Name| ROLA Mini Companion Robot| Product Model| ROLA
Mini
---|---|---|---
Product Size| 116116110mm| Product Weight| 530g±lOg
Material| ABS+PC| Resolution| 2K(2304 x 1296)
Camera Angle| 137 °| Night Vision| Supported
Speaker| 2W| Motor Type| Brushed gear motor
Battery Capacity| 5000mAh| Charging Time| -‘ 4h
Robot Power Rating| 3.6W max| Extended Memory Support| 16G – 256G
File Format| M P4| |
Legal Statement
- Before using the product, please read this document and keep it for reference.
- The illustrations and descriptions in this document are for reference only, and the actual product should take precedence. For certain specifications and configurations, please check the relevant specification documents or consult the seller.
- The nominal storage capacity and technical performance indicators are only specifications. Actual data may vary depending on the environment and settings, etc. Factors vary.
- If you use other products or software, you are solely responsible for compatibility and legality.
- No content in this document shall constitute a modification of Enabot’s product warranty policy.
- This product is not designed for organ transplantation or other life support system applications. In such applications, product failure may result in personal injury or death.
- No one may copy, delete, compile, store, transmit or translate this document without Enabot’s authorization.
IC Warning
This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
Déclaration IC RF:
Lors de l’utilisation du produit, maintenez une distance de 20 cm du corps
pour garantir conformité aux exigences d’ exposition aux RF.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
NB Warning
This product complies with the radio interference requirements of the European Community.
Product name: ROLA Mini Companion Robot
Product model: ROLA Mini
Manufacturer: Fuzhi Technology (Shenzhen) Co., Ltd. Address: Room 302,
Building 10, Qianhai E-Hub, Shenzhen, Guangdong, China Frequency Range:
2412~2472MHz;5150~5250MHz;5250~5350MHz Max. output Power:
2412~2472MHz:14.78 dbm
5150~5250MHz:15.03 dBm
5250~5350MHz:14.06 dBm
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, WeHome Technology Company Limited declares that radio equipment type
ROLA Mini is in compliance with Directiv e 2014/53/EU.This product can be used
across EU member states.
BATTERY Warning: CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
EU Responsible Person:| AOCE INFORMATION TECHNOLOGY Address: 61 rue
de Lyon 75012 Paris
Tel: +49-163 1014 128
Attn: Johnson.wang Title: Manager
Email: aoce-service@outlook.com,
---|---
Social Media
Instagram
@enabot_official|
@enabot|
@enabot_official| @enabot
---|---|---|---
For General Questions: ebo@enabot.com
For Technical Support: support@enabot.com
For Business: sales@enabot.com
For Marketing: marketing@enabot.com
Scan the QR code above Download the ROLA App
Check the electronic manual