enabot Rola PetPal Treat Dispenser Instruction Manual
- July 25, 2024
- enabot
Table of Contents
enabot Rola PetPal Treat Dispenser
Product Information
Specifications:
- Product Name: ROLA PetPal Treat Dispenser
- Features: Food chamber, feed outlet, silicone brush, rotating motor, pogo pinpoint
- Max Limit for Food: Freeze-dried food with a single side length under 12mm
Product Usage Instructions
Loading the Treat Dispenser:
Open the food chamber cover and carefully add freeze-dried or pet food into
the chamber. Make sure not to exceed the max limit line indicated. Only use
freeze-dried food that fits the size requirement to prevent blockage in the
outlet.
Closing the Food Chamber:
Once the food is loaded, securely close the food chamber to ensure proper
functioning.
Installing the Dispenser:
Attach the compartment to the robot according to the provided instructions
to set up the treat dispenser for use.
FAQ – Frequently Asked Questions:
-
Q: What type of food can I use with the treat dispenser?
A: The treat dispenser is suitable for freeze-dried or small pet food with a single side length under 12mm. -
Q: How do I prevent blockage in the outlet?
A: Make sure to only use freeze-dried food that fits the size requirement and do not exceed the max limit line when loading the food chamber. -
Q: How do I clean the dispenser if the outlet is blocked?
A: If the outlet is blocked, it should be manually cleaned following the provided instructions to ensure proper functionality.
Security Information
Please read the following safety instructions carefully and take normal safety precautions before using this product.
- Only authorized technicians can disassemble the product. Users should not try this themselves.
- Remove the protective film before use to ensure normal operation of the robot.
- To avoid damage from falling, do not place the robot in places where it may fall, such as tables, coffee tables, TV cabinets, etc.
- Do not use the robot in an environment with open flames, fragile items, or flammable items.
- Please do not drop or kick the product.
- Avoid using the product on wet floors, such as bathrooms or near kitchen sinks.
- Only use the product in an environment with a temperature between -10℃ and 45℃.
- Ensure that the Wi-Fi signal covers the product’s range of activity.
- Avoid excessively bending wires and placing heavy or sharp objects on the product.
- Do not let pets bite the product’s wires, as it may cause pet safety hazards.
- Any operation inconsistent with the instructions may cause damage to the product.
- It is prohibited for this product’s motor to be immersed or soaked in water. Some shell components can be disassembled and cleaned.
Packaging
Product Description
Usage Instructions
-
Open the food chamber cover and put freeze-dried or pet food into the chamber.
Attention: When adding freeze-dried and pet food, please do not exceed the maximum limit line. Only freeze-dried food with a single side length under 12mm can fit. Otherwise, the outlet may be blocked, which should be manually cleaned. -
Close the food chamber.
-
Install the compartment on the robot.
Legal Notices
- Before using the product, please read this document and keep it for reference.
- The illustrations and descriptions in this document are for reference only, and the actual product shall prevail. For certain specifications and configurations, please check the relevant specification documents or consult the seller.
- The nominal storage capacity and technical performance indicators are only specifications. Actual data may vary depending on the environment and settings, etc. Factors vary.
- If you use other products or software, you are solely responsible for compatibility and legality.
- No content in this document shall constitute a modification of Enabot’s product warranty policy.
- This product is not designed for organ transplantation or other life support system applications. In such applications, product failure may result in personal injury or death.
- No one may copy, delete, compile, store, transmit, or translate this document without Enabot’s authorization.
Social Media
- For General Questions: ebo@enabot.com
- For Technical Support: support@enabot.com
- For Business: sales@enabot.com
- For Marketing: marketing@enabot.com