JBC Tools DS360 Desoldering Iron Stand Instruction Manual

JBC Tools DS360 Desoldering Iron Stand

Specifications

• Product Name : DSS / DRS Desoldering Iron Stand
• Compatible References : DS-SF (for DS360), DR-SF (for DR560)
• Stand Includes :
  • Stand Cable 1m (Ref. 0024227)
  • Sponge for Modular Tool Stands (Ref. S7034)
  • Brass Wool (Ref. CL6210)
  • Cable Holder
  • Connecting Clip Set (Ref. 0024028 and 0011356)
  • User Manual (Ref. 0027183)

Product Usage Instructions

Assembly

• Adjustable Cable Collector (CC1001)
  

  • Insert the cable into the clip and then insert it into the cable collector. Ensure the cable is not longer than necessary for free movement during work.

Wiper (CL7889)

• Adjustable Tool Holder (H6272)
  • Adjust the tool holder angle to suit the work position.

Tip Cleaning

• Tip Cleaner
  Select the cleaning method based on your needs and to improve thermal transfer of the tip. Use brass wool for effective cleaning.

• Sponge (S7034)
  Gently tap on the sponge to remove excess solder. Use slots to remove remaining particles. Keep the sponge damp with distilled water to avoid tip wear.

Tip Extraction and Replacement

• Tip Extractor
  To remove the tip, place the soldering iron in the extractor groove, pull the tool towards you, and remove the tip. Replace with a new tip and press slightly to ensure correct position.

• Spanner
  The spanner is used to unscrew and replace tips. Store unused tips in the extractor openings.

• Wiper and Brass Wool Replacement
  Lift the wiper at its front edge to remove it for cleaning or replacement. Replace brass wool when worn out.

• Maintenance
  Before maintenance or storage, always unplug the stand from the station and the tool.

FAQ

• Q: How do I clean the cartridge tips effectively?
  A: Use brass wool for very effective cleaning. For very dirty tips, clean with the wiper first to remove excess solder.

• Q: What should I do before carrying out maintenance on the stand?
  A: Always remember to unplug the stand from both the station and the tool before maintenance or storage.

www.jbctools.com

INSTRUCTION MANUAL
DSS / DRS
Stand for Desoldering Iron

This manual corresponds to the following references:

• DS-SF (for DS360)
• DR-SF (for DR560)

Packing List

Box includes one stand according to purchased reference.

• Stand for
  DS360 Micro Desoldering Iron ………… 1 unit

• Stand for
  DR560 Desoldering Iron ………………… 1 unit

The following items are included in each stand:

Features and Connections

Assembly

Tip Cleaner
Select the option to suit your needs and improve the thermal transfer of the tip.

• CL6210

• Brass Wool

• Very effective cleaning method. Leaves a small layer of solder on the tip preventing oxidation between cleaning and rewetting.

• If the tip is very dirty, JBC recommends first the cleaning with the wiper to remove excess solder

• Wiper
  The integrated wiper offers different ways to clean the cartridge tips.

• Tapping
  Tap gently to remove excess solder.

• Wiping
  Use the slots to remove the remaining particles.

• Sponge
  The softest cleaning method. Keep the sponge damp with distilled water when working to avoid tip wear.

Tip Extractor

Ref. DS-SF

• Place the Soldering Iron with the assembled tip in the extractor groove, pull the tool towards and remove the tip.
• Put on the new tip and press slightly to ensure its correct position.
• Unused tips can be stored in the extractor openings.

Ref. DR-SF

• The Spanner is used to unscrew and replace the tips. When not in use it can be stored inside the extractor.
• Unused tips can be stored in the extractor openings.

Wiper and Brass Wool Replacement

The wiper and brass wool can easily be removed for cleaning or replacement when they are worn

• Lift the wiper at its front edge.
• Remove the wiper by pulling it out.
• Replace the brass wool with a new one when it is worn out. Place the wiper back o replace them if desired.

Accessories

Connection between Stand DRS, Control Unit and Module

Maintenance

• Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
• Use a damp cloth to clean the stand.
• Alcohol can be used only when cleaning the metal parts.
• Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
• Periodically check all cables and tube connections.
• Replace any defective or damaged parts. Use original JBC spare parts only.
• Repairs should only be performed by a JBC authorized technical service.

Safety

It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

• Do not use the stand for any other purpose than soldering or rework.
• The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
• The tool should be placed in the stand when not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned off.
• Handle with care, including when adjusting the stand position.
• Avoid the contact of flux with skin or eyes to prevent irritation.
• Be careful with the fumes produced when soldering.
• Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
• Utmost care must be taken with liquid tin waste which can cause burns.
• This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate  supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
• Maintenance must not be carried out by children unless supervised.

Specifications

• D-SS Stand for DS360 Micro Desoldering Iron Ref.: DS-SF
• Includes Sleep Mode
• Total Net Weight 1500 g / 3.31 lb
• Package Dimensions/Weight 1062 g / 2.34 lb (L x W x H) 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in
• DRS Stand for DR560 Desoldering Iron Ref.: DR-SF
• Includes Sleep Mode
• Net Weight 2172 g / 4.79 lb
• Package Dimensions/Weight 1608 g / 3.55 lb (L x W x H) 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in

Complies with CE standards ESD safe

Warranty

• JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
• Warranty does not cover product wear or misuse.
• In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility www.jbctools.com

www.jbctools.com

References

• JBC | Soldering Stations and Irons for seamless electronics assembly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>