CHEFMASTER HE5071 Conveyor Toaster User Guide
- August 28, 2024
- ChefMaster
Table of Contents
CHEFMASTER HE5071 Conveyor Toaster
Specifications
- Model: HE5071 Conveyor Toaster
- Warmup Time: 15 to 20 minutes
- Manufacturer: Unknown
- Warranty: Elements not covered under manufacturer warranty
Product Usage Instructions
Troubleshooting Guide
- Unit not working / dead:
- Check/replace the plug fuse.
- Ensure socket and ring main are working and switched on.
- Check cable and plug for condition.
- Uneven toasting / Unit is smoking:
- Check settings are correct.
- Select bun only toasts one side.
- Ensure unit is not in power saver mode.
- Ensure bread type and thickness is consistent.
- One or more elements may need replacement.
- Different bread types require different settings.
- Cleaning:
- Empty and clean crumb tray when appliance is unplugged and cool.
- Ensure there is no trapped bread, crumbs, or food debris.
- Toast discharging to wrong side:
- Adjust the rear discharge door following manufacturer instructions.
- Unit warmup time: 15 to 20 minutes
Troubleshooting Guide – With the appliance unplugged and cool.
Unit not working / dead| Check/replace the plug fuse.
| Check socket and ring main are working and switched on.
| Check cable and plug for condition.
|
Uneven toasting| Check settings are correct. Selecting bun only toasts one
side
| Check unit is not in power saver mode
| Ensure bread type and thickness is consistent.
| One or more elements may need to be replaced
| Different bread types require different settings
|
Unit is smoking| With the appliance unplugged and cool.
| Empty and clean crumb tray.
| Ensure there is no trapped bread, crumbs or food debris
| If smoking persists, after cleaning, call suitable qualified service
engineer to inspect
|
Element needs replacing| To be carried out by suitably qualified personnel.
| Elements are not covered under manufacturer warranty.
|
Toast is discharging to wrong side| Adjust the rear discharge door in
accordance with the manufacturer instructions.
|
Unit warmup time| 15 to 20 minutes
If fault persists, please contact your approved maintenance and repair contractor. If unit is under warranty, please contact your distributor
FAQ
- Q: What should I do if smoking persists even after cleaning?
- A: If smoking persists after cleaning, it is recommended to call a suitable qualified service engineer to inspect the unit, as elements are not covered under the manufacturer warranty.
- Q: How can I ensure even toasting?
- A: To ensure even toasting, check that settings are correct, select bun only toasts one side, make sure the unit is not in power saver mode, and ensure bread type and thickness are consistent. Different bread types may require different settings.
- Q: What should I do if the unit is not working or dead?
- A: Check and replace the plug fuse, ensure the socket and ring main are working and switched on, and check the cable and plug for any damage or wear. If the issue persists, contact your approved maintenance and repair contractor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>