PRO Charge 2900137 In Socket Charging Solutions Instruction Manual
- August 28, 2024
- PRO Charge
Table of Contents
PRO Charge 2900137 In Socket Charging Solutions
Grounded wall socket/USB port
Warning when handling electrical voltage!
Indirect or direct contact with parts carrying mains voltage results in a
dangerous current flowing through the body. This can result in electric shock,
burns or, in the worst case, death. There is a risk of fire if work is carried
out improperly on live products.
- Always switch off the mains voltage before assembly and/or disassembly!
- Only allow work on the 230 V mains to be carried out by qualified personnel.
- Read the operating instructions carefully and keep them (they are legally part of the product).
- Further user information at www.shada.nl or by scanning the QR code.
Intended Use
- USB socket, (see table for type) is used to charge mobile battery devices that can be connected directly to the USB socket via a charging cable (not included), e.g. mobile phones, media players or tablets (observe the technical data of the mobile device).
- Only connect approved and technically flawless charging cables. The product is only suitable for use in dry indoor areas.
Technical Data
- Article 2900137
- Outputs USB: USB-1xA,1xC
- Output voltages and currents max: USB A & USB C
- 5.0V/3.0A
- 9.0V/2.0A
- 12.0V/1.5A
- Output power max: 18.0W (USB-A + C max. 15.0W)
- Power distribution: Intelligent
- Overload protection: Yes
- Efficiency: >86%
- Standby consumption: <50mW
- Data transfer: No
- Input voltage AC- max: 250V~/ 50Hz/60Hz
- Outputs AC~: 1x 230V~
- Load AC~ max: 3680W (230V/16A)
- Connection type, rigid stranded wire: 3x 1.5…2.5 mm?
- Protection class: IP20, SELV
- Increased touch protection: Yes
- Operating temperature: +5°C – +35°C
- Installation depth: 31.5mm
What In The Box
POWER
ON/OFF
Installation Instructions
Installation
For the correct installation position, the connection terminals must point
downwards and the flush-mounted box should have a minimum depth of 40 mm (deep
flush-mounted boxes according to DIN 49073). This is not only for easier
installation but also for better ventilation of the unit.
WARNING!
Only use approved charging cables. Unsuitable charging cables can lead to
malfunctions or destruction of the devices.
In the event of a possible overload, the USB connections are deactivated
within the cooling phase of the socket. Short charging interruptions are
possible in this case.
CONTACT
- Molenmakershoek 28, NL-7328 JK APELDOORN – The Netherlands
- www.shada.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>