GREAT DAY HNR1000T and TLB Hitch N Ride Cargo Carrier Installation Guide
- August 27, 2024
- GREAT DAY
Table of Contents
GREAT DAY HNR1000T and TLB Hitch N Ride Cargo Carrier
Specifications
- Model Numbers: HNR1000T & TLB or HNR2000T & TLB
- HNR1000 Capacity: 400 lbs. Distributed Weight
- HNR2000 Capacity: 400 lbs. Distributed Weight
FAQs
- Q: What is the weight capacity of the Hitch-N-Ride Cargo Carrier?
- A: The HNR1000 and HNR2000 have a capacity of 400 lbs. of distributed weight.
Instructions For Installation And Use
Contents: (Fig.1)
- 1- Cargo Rack
- 1- Receiver bar
- 2- Support braces
- 2- 5/16″ x 5″ bolts
- 4- 5/16″ 2-3/4″ bolts
- 6- 5/16″ locknuts
- 12 -Flat washers
- Attach the receiver bar and support braces to the cargo rack using the 5/16″ x 5″ bolts, locknuts, and flat washers provided. Snug locknuts, but do not tighten completely. (Fig. 2)
- Fasten the ends of the support braces to the cargo rack, (Fig. 3) using the 5/16″ x 2-3/4″ bolts, locknuts, and flat washers provided.
- Note: braces will bend in this process. Tighten all fasteners
- Insert the receiver bar of the HITCH-N-RIDE into the receiver hitch of the vehicle and secure it with the receiver hitch pin (not included). (Fig. 4 & 5)
- HNR1000 CAPACITY: 400 LBS. DISTRIBUTED WEIGHT
- HNR2000 CAPACITY: 400 LBS. DISTRIBUTED WEIGHT
- WARNING: ALWAYS MAKE SURE RECEIVER HITCH PIN IS IN PLACE AND SECURED*
- WARNING: ALL CARGO SHOULD BE INSPECTED AND PROPERLY SECURED BEFORE TRAVELING*
- WARNING: DO NOT EXCEED THE WEIGHT CAPACITY OF THE HITCH-N-RIDE*
- WARNING: NEVER ALLOW PASSENGERS TO RIDE ON THE HITCH-N-RIDE*
- READ ALL INSTRUCTIONS BEFORE USING THE HITCH-N-RIDE
- NOTE: Failure to read instructions before use could result in injury or death
CONTACT INFORMATION
For more information about this or other products, contact us at:
- Great Day, Inc.
- 604 Kimbrough Dr.
- Tallulah, LA 71282
- 866-649-1918
- www.greatdayinc.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>