SCT RC4-HHV Camera Extension Kit User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RC4-HHV Camera Extension Kit
Product Information:
- Product Name: HuddleCam HUDDLEVIEW or SIMPLTRACK2
- Application Guide: RC4-HHVTM
- Joystick or Controller: Sony RM-IP10 Joystick or Generic Controller
- Power Supply: Sony 120V Power Supply (W PS-1230VDC 100-240V 47-63Hz)
- Video Cables: RCC-C004-0.3M DVI to HDMI Video Cable, HDMI to HDMI Video Cable
- Cables: RC4-HETM, RCC-H001-1.0M, PPC-022-0.3M RJ11 to Barrel Power Cable, SCTLinkTM Cable (Power, Control & Video)
Note:
The SCTLinkTM cable must always be a single, point-to-point CAT cable with no
couplers or interconnections.
Module Dimensions:
- RC4-CETM: H: 0.93″ (23mm) x W: 2.5″ (63mm) x D: 3.741″ (95mm)
- RC4-HETM: H: 1.504″ (38mm) x W: 3.813″ (96mm) x D: 3.617″ (91mm)
SCTLinkTM Cable Specs:
- Integrator-Supplied CAT5e/CAT6 STP/UTP Cable
- T568A or T568B Wiring (100m Maximum Length)
- RJ45 Pinout:
| T568A | oO gBbGbrBR |
|---|---|
| T568B | gGoBbO brBR |
Product Usage Instructions:
To use the HuddleCam HUDDLEVIEW or SIMPLTRACK2, follow the steps below:
- Connect the Sony RM-IP10 Joystick or a compatible generic controller to control the camera movements.
- Ensure the Sony 120V Power Supply (W PS-1230VDC 100-240V 47-63Hz) is connected to provide power to the system.
- Use the RCC-C004-0.3M DVI to HDMI Video Cable or HDMI to HDMI Video Cable to connect the camera to a display device.
- If using additional modules, such as RC4-HETM or RC4-CETM, refer to their specific dimensions for installation.
- For power and control connections, use the RCC-H001-1.0M cable, PPC-022-0.3M RJ11 to Barrel Power Cable, and the SCTLinkTM Cable (Power, Control & Video).
- Make sure the SCTLinkTM cable is a single, point-to-point CAT cable without any couplers or interconnections.
- If integrating with an existing network, use CAT5e/CAT6 STP/UTP cable with T568A or T568B wiring (up to a maximum length of 100m).
- Refer to the RJ45 pinout table above to correctly wire the RJ45 connectors.
By following these instructions, you will be able to effectively use the HuddleCam HUDDLEVIEW or SIMPLTRACK2 with the provided accessories and cables.
Connections
Module Dimensions
- RC4-CE™M:
- H: 0.93″ (23mm) x
- W: 2.5″ (63mm) x
- D: 3.741″ (95mm)
- RC4-HE™:
- H: 1.504″ (38mm) x
- W: 3.813″ (96mm) x
- D: 3.617″ (91mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>