Huizhou Feichangxing Technology KK12 PLUS / FCX-Y6 Bluetooth Karaoke Speakers Instruction Manual
- August 26, 2024
- Huizhou Feichangxing Technology
Table of Contents
Huizhou Feichangxing Technology KK12 PLUS / FCX-Y6 Bluetooth Karaoke
Speakers
Welcome
Thank you for choosing to purchase this karaoke microphone, which is used must
any practice and ko anytime here try to analyze and playback the device. Wish
you a pleasant use!
Function
This karaoke microphone speaker set adopts advanced 1-wire communication technology, mobile phone karaoke Bluetooth connection, and wireless accompaniment, and is fully compatible with current mainstream mobile phones. Whether you are a karaoke fan or an Android K fan, you can enjoy the pleasure of karaoke with energy conservation and ease.
Instructions for microphone functions
Function
Support Bluetooth connection to play music/support TF card to play music
/karaoke sound reinforcement function / built-in reverberation sound effect
function/headphone output function.
Accessories
- Loudspeaker box
- Microphone Instructions
- Type-c cable
Precautions for using speaker microphone
Switch on / off
Long press the on/off button in the shutdown state to automatically turn on
the product. When no TF card is inserted, it defaults to Bluetooth mode with a
voice prompt of “Bluetooth ready, waiting to connect”. Long press the on/off
button for 3 seconds
Bluetooth connectivity
One makes a paring connection setter the connection is dece stu, there will be
a prompt tone, and the blue Light will always be on.
Mobile Playback
After the Bluetooth connection is successful, open the mobile music player and
download your favorite songs or the accompaniment can be played, and the
volume can also be adjusted to the appropriate level on the mobile phone.
Tf card play
Insert the TF card into the device, and the device will automatically play the
music in the TF card.
Sound adjustment
The volume of the microphone and accompaniment can be adjusted through the
buttons on the device control panel.
Charge
Connect the standard charging line to the charger for charging. The red light
is always on when charging, and it is full off.
Attention
- Please disconnect the charger and turn it off before cleaning the machine.
- Nonprofessionals are not allowed to disassemble the equipment by themselves to avoid machine failure and loss of warranty rights.
- Please do not place the equipment in direct sunlight to avoid premature aging of electronic parts.
- Avoid using in places with flying dust or dirty environments (dust is easy to cause equipment failure
- Do not place the equipment in an excessively cold or overheated environment, which may cause the equipment to fail to operate normally.
- It is recommended that the ambient temperature of the equipment used should not exceed-10°C-40°C, Which is relatively moderate 10%-95%.
- Please do not put any objects into the equipment to avoid short circuits or circuit damage. Please do not spill any liquid on the product.
- Avoid friction and collision between the machine and hard objects to avoid scratching, falling off, or other hardware damage.
- The product shall not be exposed to the sun, fire, or similar overheating environment.
- It is forbidden to disassemble, impact, squeeze, or put the product into fire. If the battery has a serious failure, Do not continue to use it.
- This manual contains important information, please reserve it.
- This product does not support fast charging. Charging with a 2A or the higher charger is disabled.
Bluetooth
- Press and hold the speaker power on the key to start the machine, and the voice prompt “Bluetooth mode” will flash at the same time. Connect success blue light is always on.
- Turn on the mobile phone Bluetooth and scan, search for the device, and then pair and connect, and you can hear it after connecting The device sends a successful connection tone.
- After the microphone is turned on, it will automatically pair the speakers When the microphone is not paired, the blue light will flash, and the
Bluetooth light will flash always bright
Note: After the device is connected to the mobile phone once, Bluetooth has a
memory function, and it wil automatically connect when the phone is turned on,
To disconnect, disconnect Bluetooth through the phone settings If you listen
to music only, you can turn the microphone volume adjust to the minimum.
- Sing K audio & microphone features
- Intelligent anti squealing-
- Sing loudly without howling within 10cm.
- High radio sensitivity-
- It is easy to sing with a microphone that is loud and has good sound quality.
- Low latency- The delay is less than 40ms.
- Al functions- 5 kinds of sound effects; One click to cancel the original sound; Flexible adjustment of accom- payment reverberation and microphone volume.
Note: The company’s products are constantly innovative and subject to change without notice.
Speaker
- Bluetooth version: 5.4
- Battery capacity: 1800mAh
- standby power: <10uA
- Working battery life: 2-3 hours
- Charging duration: About 5 hours
- Working current: around 800mA
- Working voltage: 3.7V for lithium batteries
- Charging voltage/current: DC5V/450MA
- Transmission distance: approximately 8-15m
Microphone
- Working current: < 18mA
- Working voltage: 3.7V
- Mark Wind Sensitivity: -35dB
- Transmission distance: approximately 8-15m
- Charging time: approximately 2.5 hours
Infor mation
- Product name: Bluetooth speakers
- Product model: KK12Plus
Note: The company’s products are constantly innovative and subject to change without notice.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a ClassB digital device, under part 15 of the FCC Rules. These limits are
designed toprovide reasonable protection against harmful interference in
residential installation equipment that generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interferenceto radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver 1s is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The devicecan be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>