Electroincs TYDD25W2LB01 Ess DC DC Converter Instructions
- August 27, 2024
- Electroincs
Table of Contents
Electroincs TYDD25W2LB01 Ess DC DC Converter
Specifications
- Manufacturer: TY Module Korea Co., Ltd.
- Product: ESS DC/DC CONVERTER
- Model: TYDD25W2LB01
- FCC Information: This device complies with part 15 of the FCC Results.
- Purpose of Use: Isolated DC-DC converter for battery control power source in ESS
- Ratings:
- Input: 250-999V d.c, 0.15A
- Output: 24V d.c, 0.85A
- Operating Temperature Range: -20°C to +50°C
- Storage Temperature Range: -30°C to +60°C
- Dielectric Withstand Voltage: Primary-Secondary DC6000V(AC4250V), 60Sec, 10 mA
- MTBF: Normal Operating, 25,131,000 Hr
Product Usage Instructions
- Installation:
- Ensure the input power is within the specified range (250-999V d.c, 0.15A).
- Connect the output to the device requiring 24V d.c, 0.85A.
- Operation:
- Place the converter in a well-ventilated area with temperatures between -20°C to +50°C.
- Make sure to follow the FCC guidelines for interference prevention.
- Maintenance:
- Regularly check for any physical damage or loose connections.
- Keep the unit clean and free from dust accumulation.
Purpose of use
- It is an isolated DC-DC converter and is used as a battery control power source for ESS.
Ratings
- Input: 250-999V d.c, 0.15A
- Output: 24V d.c, 0.85A
FCC
- Product: ESS DC/DC CONVERTER
- Model: TYDD25W2LB01
FCC Information
This device complies with part 15 of the FCC Results.
Operation is subject to the following two conditions:
- This Device may not cause harmful interface, and
- This device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, under Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FAQs
- Q: What should I do if the device is not providing the expected output?
- A: Check the input voltage and connections to ensure they are within specifications. If issues persist, contact customer support for assistance.
- Q: Can this converter be used with other battery systems apart from ESS?
- A: It is recommended to use this converter specifically for ESS applications as per its designed purpose for optimal performance and safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>