Thdstatic 24V11-24 Bathroom Vanity Installation Guide

Thdstatic 24V11-24 Bathroom Vanity

Specifications

• Model Type: Wall-mounted Bathroom Vanity
• Available Models: 24V11-24, 24V11-30, 24V11-36, 24V11-42, 24V11-48, 24V11-60, 24V11-72, 24V12-24, 24V12-30, 24V12-36, 24V12-42, 24V12-48, 24V12-60, 24V12-72, 24V13-16
• Installation Type: Screw-mounted Bathroom Vanity for model 24V11-16

Product Usage Instructions

Before You Begin
Safety Warnings

1. Follow installation, operation, and maintenance guidelines provided in the manual.
2. Perform periodic maintenance to ensure product longevity.

Tools Required (Not Supplied)

• Drill
• Drill bit
• Glass drill
• Screwdriver
• Spirit level
• 3m Ruler
• Pencil
• Silicon sealant
• Masking tape

Installation Instructions
Wall-mounted Bathroom Vanity

Step 1: Remove Drawers

1. Fully extend drawers.
2. Lift the drawer gently to remove it from the tracks.
3. Remove screws from the bottom track and set aside for reinstallation.

Step 2: Mount the Vanity on the Wall

1. Position the bracket on the wall and level it with a spirit level. Mark positions, drill holes, and insert wall anchors. Secure the bracket with provided bolts.
2. Lower the cabinet onto brackets ensuring it hooks securely.

Step 3: Install the Countertop

1. Apply silicone sealant in a continuous bead along the top edges of the cabinet.

Step 4: Reinstall Drawers

FAQ
Q: What should I do if I encounter missing parts during assembly?
A: In case of missing parts, please contact customer support for assistance in acquiring the necessary components for completion.

INSTRUCTION MANUAL
BATHROOM VANITY

Attach Your Receipt Here
Model Number__
Purchase Date__
Thank you for purchasing this quality product. Please carefully inspect all packing materials and check the carton for small parts that may have come loose during shipping. This instruction must be provided to the user. Warranty & liability are limited to cases where assembly is performed by approved professionals in accordance with the instructions and local codes.

MODEL TYPE

• Please verify the model on the package you received. Use the table above to confirm the product type of your item based on its model number. Different types correspond to different contents and installation methods.

BEFORE YOU BEGIN

1. Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences.
2. To avoid costly mistakes, please thoroughly follow the operating and safety instructions below.
3. All information in this manual is based on the latest product information available at the time of publication. We reserves the right to change product specifications, packaging, or availability at any time without notice.
4. Please carefully review the important care and cleaning guidelines at the end of this manual.
5. This product complies with GB 24977-2010.

SAFETY WARNINGS

Our products are precision-engineered to provide superior and safe performance, provided the following guidelines are met:

1. They are installed, commissioned, operated, and maintained according to the recommendations in this manual.
2. To keep the product in good working order, periodic maintenance is necessary. Carefully inspect the new fixture for any signs of damage. When installing the products, follow the manufacturer’s guidelines for power tool safety.

TOOLS REQUIRED (NOT SUPPLIED)

Wall-mounted Bathroom Vanity

1. Step 1: Remove DrawersMetal box

2.  Step 2: Mount the Vanity on the Wall

3. Step 3: Install the Countertop

4. Step 4: Reinstall Drawers

Screw-mounted B athroom Vanity (Screws attached directly to the w all )

Installation Steps

1. Step 1: Measure the length between the two holes on the vanity back panel which is predrilled before delivery. Normally 192mm /7-1/2″ apart. The recommended installation height is 790mm/31″ from floor. *Size may vary by models.
2. Step 2: Mark these two points on the wall for bolts placement. Drill holes and insert wall anchors.
3. Step 3: Lift the cabinet and align it with the installed anchors. Use bolts to secure.
4. Step 4: Apply silicone sealant along the vanity top. Place the top on the vanity and let it dry for 24h.

USER MAINTENANCE

To extend the life of the product, please do the maintenance work every day. The following maintenance methods are for reference only.

• Always dry the vanity after use to prevent water spots. Use a dry towel to wipe away any water splashes.
• When the product is stained with dirt, wipe the cabinets clean with a soft, damp cloth, apply some cleaners, and dry immediately with another clean, soft cloth.
• The water supply pipes, the drainage pipes, and the connection parts are prone to water leakage under different circumstances. Please check these parts regularly to avoid accidents due to water leakage.
• After the product is used for a period of time, dirt will remain on the drain plug, which will affect drainage, so the plug needs to be cleaned regularly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>