Green Valley SKEVO 001 Easy One Evo Instruction Manual
- August 24, 2024
- Green Valley
Table of Contents
Green Valley SKEVO 001 Easy One Evo
Product Information
Specifications:
- Brand: AUDI
- Model: Q2
- Year: 2017 ->
- Maximum Load Weight: 75 kg
Product Usage Instructions
Assembly:
- Ensure you have all the necessary components listed in the manual.
- Follow the assembly instructions provided in the manual step-by-step.
- Tighten all components as per the specified torque values.
Usage:
- Ensure the total permissible laden weight of your motor vehicle is not exceeded.
- Observe the maximum roof weight specified by the motor vehicle manufacturer.
- Periodically check the installation at each trip and at certain kilometer intervals.
FAQ
-
Q: What is the maximum load weight for this product?
A: The maximum load weight for this product is 75 kg. -
Q: How often should I check the installation?
A: It is recommended to perform a periodic check at each trip and at certain kilometer intervals as specified in the manual. -
Q: What should I do if I exceed the maximum roof weight specified by the motor vehicle manufacturer?
A: Do not exceed the maximum roof weight specified by the motor vehicle manufacturer to ensure safe usage of the product.
FEATURES
WARNING
PARTS
| BRAND | MODEL | YEAR | DOOR | X | Y | A | B |
|---|---|---|---|---|---|---|---|
| AUDI | Q2 | 2017 -> | 5 | 104 cm | 99,5 cm | 30 cm | 70 cm |
Always respect the dimensions shown in the table for any doubt contact your dealer.
OVERVIEW
INSTALLATION
Not exceed the total weight permitted on the vehicle roof
IMPORTANT INSTRUCTION
- Follow the assembly and usage instructions in the notice supplied.
- Keep this manual permanently.
- The maximum load weight is 75 kg.
- The total permissible laden weight of the given motor vehicle may not be exceeded. The instructions of the motor vehicle manufacturer in respect of the maximum roof weight must be observed.
- Calculation of available roof load: Weight of roof rack + weight of roof box + weight of payload = available roof load
- Adjust and position the bars as shown in the manual (if missing no fix the racks, please contact your dealer) The tightness of the fixation devices and security parts, and the roof rack load bars, as well as any additional accessories, must be checked once loaded and regularly during the journey. Retighten if necessary.
- Adhere to the manufacturer’s instructions regarding the maximum authorized load on the vehicle.
- Adhere to the manufacturer’s instructions regarding assembly and a maximum authorized load of roof racks.
- In all cases, respect current regulations.
- The load must be evenly distributed over the roof rack and the center of gravity should be as low as possible. It is essential to ensure the load is safely and adequately fixed.
- Be careful to place heavy and narrow loads near to the rack’s fixing points.
- Loads that overhang the roof rack must conform to current regulations and be properly secured.
- Any load carried on the roof of a vehicle significantly affects its behavior, in particular its tolerance to side winds, its behavior in bends and on braking. It is recommended to drive more carefully (reduce speed, be aware of increased braking distances).
- To reduce fuel consumption you are recommended to remove the roof rack after use.
- Attention: Secure the load correctly and safely.
- Use reliable and well-maintained material and check it is in good order before and after each use.
- The roof rack may only be used for the functions specified by the constructor.
- It is important to keep the assembly and usage instructions.
- Roof accessories can cause noise or turbulence during use.
- Do not fix the accessory to other brand’s fixing systems.
- Never exceed the speed limit indicated on the first page of the manual.
- If you have any doubts about fixing or use please contact your nearest branch of the distributor, Green Valley.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>