wada power HN10132 AC EV Charging Station User Manual
- August 22, 2024
- wada power
Table of Contents
HN10132 AC EV Charging Station
Specifications:
Model: HN10 Series AC EV Charging Station
Available Models:
- HN10132: 1-phase, 7kW, with charging cable
- HN10116: 1-phase, 3.5kW, with charging cable
- HN10332: 3-phase, 22kW, with charging cable
- HN10316: 3-phase, 11kW, with charging cable
Product Usage Instructions:
Installation:
-
Ensure the power supply meets the requirements of the charging
station. -
Mount the charging station securely on a suitable surface.
-
Connect the charging cable to the designated outlet.
-
Follow the wiring diagram provided in the user manual for
proper electrical connections.
Operation:
-
Plug in the electric vehicle to the charging station.
-
Follow the instructions on the LCD display for charging
status. -
Charging will automatically start once the connection is
established. -
Monitor the charging progress using the LED indicators.
Maintenance:
-
Regularly inspect the charging station for any signs of
damage. -
Clean the station and cables as needed to ensure proper
functionality. -
Refer to the maintenance section of the user manual for
detailed maintenance procedures.
FAQ:
Q: What should I do if the charging station does not start
charging?
A: Check the power supply and connection to the
vehicle. Ensure all connections are secure and try restarting the
charging process.
Q: How can I troubleshoot a fault indicated by the
station?
A: Refer to the fault handling section in the
user manual for detailed steps on diagnosing and resolving common
issues.
UM2224.HN10.A5A0
HN10 Series AC EV Charging Station
About this User Manual
User Manual
Read carefully before installation, maintenance and operation! Failure to read
this manual carefully may lead to improper operation. Failure to follow the
safety notes may lead to a danger of death, injury and
damage to the device, supplier cannot accept any liability for claims
resulting from this.
Thank you very much to use our AC EV Charging Station.
This manual describes the installation, use and maintenance of AC EV Charging
station. This manual is intended for installation, maintenance personnel and
terminal customer.
Article
Model Number
1-phase, 7kW, with charging cable
HN10132
1-phase, 3.5kW, with charging cable
HN10116
3-phase, 22kW, with charging cable
HN10332
3-phase, 11kW, with charging cable
HN10316
The text and illustrations in this user manual are general explanations of these
type of equipment, and the actual product may be inconsistent with this manual
in detail.
All rights reserved.
-1-
HN10 Series AC EV Charging Station
CONTENTS
User Manual
1. ABBREVIATIONS …………………………………………………………………………………………………………………. 4
2. SAFETY NOTES ……………………………………………………………………………………………………………………. 5 2.1. Safety
signs used ……………………………………………………………………………………………………………………………….. 5 2.2.
Environment ……………………………………………………………………………………………………………………………………….. 6 2.3.
Installation ……………………………………………………………………………………………………………………………………………7 2.4.
Operation ……………………………………………………………………………………………………………………………………………..7 2.5.
Maintenance ………………………………………………………………………………………………………………………………………..8
3. STANDARDS COMPLIANCE ……………………………………………………………………………………………….9 3.1. Charging
mode ……………………………………………………………………………………………………………………………………9 3.2. Charging
connection …………………………………………………………………………………………………………………………. 9 3.3. Charging
interface …………………………………………………………………………………………………………………………… 10
4. PRODUCT INFORMATION ………………………………………………………………………………………………. 11 4.1.
General11 4.2. Model number definition
……………………………………………………………………………………………………………….. 12 4.3. Specifications
……………………………………………………………………………………………………………………………………. 12 4.4. Nameplate
………………………………………………………………………………………………………………………………………… 14
5. INSTALLATION …………………………………………………………………………………………………………………..15 5.1.
Unpacking …………………………………………………………………………………………………………………………………………. 15 5.2.
Prepare………………………………….. ……………………………………………………………………. ……………………………………16 5.3. Power
supply system ………………………………………………………………………………………………………………………. 18 5.4.
Installation steps ……………………………………………………………………………………………………………………………….19 5.5.
Empty socket ……………………………………………………………………………………………………………………………………..21
6. OPERATION ………………………………………………………………………………………………………………………. 23 6.1. Power on
…………………………………………………………………………………………………………………………………………….23 6.2. Human-Machine
Interface ……………………………………………………………………………………………………………… 23 6.3. Start Charging
………………………………………………………………………………………………………………………………….. 24 6.4. Normally stop
charging ………………………………………………………………………………………………………………….. 26
-2-
HN10 Series AC EV Charging Station
User Manual
6.5. Abnormally stop charging ……………………………………………………………………………………………………………… 26
7. FAULT HANDLING AND MAINTENANCE ……………………………………………………………………… 27 7.1. Fault Handling ………………………………………………………………………………………………………………………………….. 27 7.2. Maintenance …………………………………………………………………………………………………………………………………….. 29
WARRANTY AGREEMENT ………………………………………………………………………………………………………. 30
DECLARATION OF CONFORMITY(DOC) ………………………………………………………………………………. 31
COMPLIANCE STATEMENT OF WEEE …………………………………………………………………………………… 32
-3-
HN10 Series AC EV Charging Station
1. ABBREVIATIONS
User Manual
S/N Abbreviations
Description
1
IEC
International Electrotechnical Commission
2
EV
Electrical Vehicle, this can be BEV (battery EV) or PHEV (plug-in hybrid EV)
3
EVSE
Electric Vehicle Supply Equipment [IEC61851-1]
4
OBC
On-board charger (of an EV)
5
LCD
Liquid Crystal Display
6
LED
Light-emitting Diode
7
RFID
Radio Frequency Identification
8
CMS
Central Management System
9
OCPP
Open Charge Point Protocol
10
IP
Ingress Protection
11
HMI
Human-Machine Interface
12
RCMU
Residual Current Monitoring Unit
13
MCB
Miniature Circuit Breaker
“T” — indicates the connection between earth and the power supply is
direct connection of a point with earth (French: Terre).
“N” — the earth connection is supplied by the electricity supply
network, either separately to the neutral conductor (TN-S), combined
14
TN
with the neutral conductor (TN-C), or both (TN-C-S).
15
PE
16 -4-
PEN
Protective Earth. The conductor that connects the exposed metallic parts of the consumer’s electrical installation PEN line is to accurately and well ground the original neutral line, and connect the shell of the equipment to be protected to the PEN line
HN10 Series AC EV Charging Station
User Manual
2. SAFETY NOTES
2.1. Safety signs used
The following warning signs, mandatory signs and information signs are used in
this manual, on and in the AC EV Charging station.
CAUTION: Warning of electrical hazards. This sign is intended to alert the user that severe personal injury or substantial property damage can result if the device is not operated as requested.
ATTENTION: Warning of a danger spot or dangerous situation. This sign is intended to alert the user that minor personal injury or material damage can result, if the device is not operated as requested.
CAUTION: Do not touch by hands in case of ESD. Indicates the possible consequences of touching electrostatically sensitive components.
CAUTION: Warning of combustion.
No access for unauthorized persons.
No access for persons wearing pacemakers.
Use protective footwear. Must wear a safety helmet.
-5-
HN10 Series AC EV Charging Station
Indicates important texts, notes or tips.
User Manual
Indicates recycling information.
Indicates assemblies or parts that must be disposed of properly. Do not dispose of them in the household waste.
2.2.
Environment
EV Charging station should be installed on the incombustible such as concrete;
otherwise, hazardous fire may result.
EV Charging station should not be installed in the area that contains explosive gas; otherwise, hazardous blast may result.
Leave no inflammable or explosive substances near the EV Charging station; otherwise, hazardous blast may result.
EV Charging station should be installed in a place with no conductive dust and
insulation-destructive gas or vapor.
EV Charging station should be installed in a place with no violent vibration
and impact; for good ventilation, mount the charging station vertically.
The installation foundation shall be higher than the ground level, and
drainage ditch shall be set around the EV Charging station, otherwise the
equipment may be damaged.
-6-
HN10 Series AC EV Charging Station
2.3. Installation
User Manual
Safety protection must be done when installing the EV Charging station.
Installation and wiring should be done by personnel with professional
qualification, otherwise, hazardous electric shock may result.
Make sure input power supply is entirely disconnected before wiring;
otherwise, hazardous electric shock may result.
PE terminal of the EV Charging station must be grounded securely; otherwise,
hazardous electric shock may result.
The lead nose of the charging station must be securely attached or there is a
risk of damaging the equipment.
Leave no metals such as bolts, gaskets into the inside of the EV Charging
station; otherwise, hazardous blast and fire may result.
Main loop terminal of the EV Charging station should be firmly connected with
the wiring ends; otherwise, damage to property may result.
Bare parts of wiring ends of electrical cables must be wrapped with insulating
tape; otherwise, hazardous fire and property loss may result.
2.4. Operation
Strictly forbidden for minors or persons of restricted capacity to approach
the charging station to avoid injury.
Forced charging is strictly forbidden when the electric vehicle or charging
station fails.
It is strictly prohibited to use the charging station when the charging adapter
or charging cables are defective, cracked, worn, broken or the charging cables
is exposed. If you find any, please contact the supplier in time.
-7-
HN10 Series AC EV Charging Station
User Manual
EV can only be charged with the engine off and stationary.
Do not charge in rainy and thunderous weather.
2.5. Maintenance
Personnel must always use protective footwear when maintenance work. Caution
ESD to avoid damaging electronic devices, especially to protect microchips on
PCBA. Accessory replacement must be done by qualified personnel, thrums or
metals are prohibited to be left in the controller; otherwise, hazardous blast
and fire may result. After replacing main PCBA, parameters must be adjusted
and matched before operation; otherwise, property loss may result.
It is recommended that routine safety inspection visits to charging station be
conducted at least once a week.
Keep the charging connector clean and dry and wipe with a clean, dry cloth if
soiled.
-8-
HN10 Series AC EV Charging Station
3. STANDARDS COMPLIANCE
3.1. Charging mode
Conformed to EN IEC 61851-1:2019
User Manual
Charging mode: method for connection of an EV to the supply network to supply energy to the vehicle The Charging mode of HN10 series product is Mode 3
Mode 3 is a method for the connection of an EV to an AC EV supply equipment
permanently connected to an AC supply network, with a control pilot function
that extends from the AC EV supply equipment to the EV.
3.2. Charging connection
According to EN IEC 61851-1:2019, HN10 series products meet the Case C
connection.
Case C:
Connection of an EV to a supply network utilizing a cable and vehicle
connector permanently attached to the EV charging station.
Fig. 3-1 Schematic diagram of CASE C connection -9-
HN10 Series AC EV Charging Station
User Manual
3.3. Charging interface
The charging connector of HN10 series products meet IEC 62196-2, Type 2 plug (with charging
cable).
(a) 1-phase socket
(b) 3-phase socket
Fig. 3-2 Type 2 plug on HN10 series products
HN10 series products provide a Type 2 female plug with charging cable, it only charging an EV
with a Type 2 vehicle inlet.
– 10 –
HN10 Series AC EV Charging Station
4. PRODUCT INFORMATION
4.1. General
Welcome to use AC EV Charging station produced by our company. The shape &
dimensions of AC EV charging station shown as Fig. 4-1.
User Manual
Fig. 4-1 The shape & dimensions of HN10 series The block diagram of AC EV charging station is shown as Fig. 4-2.
Fig. 4-2 Block diagram of products
– 11 –
HN10 Series AC EV Charging Station
User Manual
It is widely used in all kinds of household electric vehicle charging, as well as various charging
stations, parking lots, community garages and public electric vehicle charging places.
4.2. Model number definition
The model number definition of charging station follows the rules as shown in Fig. 4-3.
HN10
Maximum output rated current 16: 16A; 32: 32A Phase number: 1: 1-phase 3: 3-phase
Product series code
Fig. 4-3 Model number definition
4.3. Specifications
4.3.1. Electrical specifications
Phase Number
1-Phase
3-Phase
Model Number
HN10116
HN10132
HN10316
HN10332
Rated Voltage
230V, 50/60Hz
400V, 50/60Hz
Rated Current
16A
32A
16A
32A
Rated Power
7kW (@230V, 1-phase)
22kW (@400V, 3-phase)
Recommended
3 × 4mm2,
3 × 6mm2, 5 × 4mm2,
5 × 6mm2,
power supply cable copper
copper
copper
copper
MCB built-in
NO
NO
Input Terminals
L/ N/ PE
L1/L2/L3/N/PE
IEC 62196-2, Type 2, 1-phase plug IEC 62196-2, Type 2, 3-phase plug
Charging interface
with 5m cable
with 5m cable
Note: That cord extension sets Note: That cord extension sets
are not be used
are not be used
*Note: The tripping time of MCB 10ms (@1000A short-circuit current),The service environment conditions of
the Type A leakage circuit breaker shall be considered according to the service environment of the AC EV
Charging Station.
– 12 –
HN10 Series AC EV Charging Station
User Manual
4.3.2. Functional description
Model series
HN10 1-phase series
Charging Mode
Mode 3
Charging Control
Local: “Button-controlled” or “Card-controlled”
Indicator Lights
A LED lights; Indicate 9 statuses
Surge protection, over temperature, over/under voltage, over current,
Safety Protection
leakage fault, ground protection for TN system (TN-C, TN-S and
TN-C-S)
RCMU Built-in
Yes
4.3.3. Ambient conditions
Model series
HN10 1-phase series
Altitude
2000m
Storage temperature
-40 ~ 75
Operation temperature -30 ~ 55
Relative humidity
95%RH, no water droplet condensation
Vibration
0.5G, no acute vibration and impaction
Installation location
Indoor or outdoor, good ventilation, no flammable, explosive gases
4.3.4. Mechanical parameters
Model series
HN10 1-phase series
Mounting
Wall-mounted or pole-mounted (mounting pole is optional)
Net Weight
8kg
Dimension
H×W×D = 180mm ×180mm × 65mm
Color & Material
Front cover: White, PC+ASA; Back cover: White, PC+ASA
IP Code
IP65
IK Code
IK10
– 13 –
HN10 Series AC EV Charging Station
4.4. Nameplate
User Manual
On the wallbox shell, there is a nameplate identifying the model and specification of the charging
station, the content is shown as Fig. 4-4.
Fig. 4-4 The location and content of the nameplate – 14 –
HN10 Series AC EV Charging Station
5. INSTALLATION
5.1. Unpacking
5.1.1. Packing list Package AC EV Charging Station RFID card Wall-mounting
accessories (including A+B+C+D as Fig. 5-1 shown) User manual Quality
certificate Empty socket
User Manual
Quantity 1 pc 2 pcs 1 set 1 pc 1 pc 1 pc
Fig. 5-1 Wall-mounting accessories
5.1.2. Inspection & confirm When unpacking, please carefully confirm the
following points: Whether the accessories are missing according to the packing
list. Whether there is any damage during transportation.
– 15 –
HN10 Series AC EV Charging Station
User Manual
Whether the model and specification of the machine’s nameplate are consistent with the order
requirements.
If any damage or missing parts are found, please do not start the machine and
contact the supplier as soon as possible.
Please keep the packing box and packing materials 1 month for future handling.
The paper packaging is recyclable.
5.2. Prepare
When transporting or moving the charging station, pay attention to the following points to
ensure product safety:
This product is electrical equipment. It should be handled with care to avoid
violent vibration and impact.
The charging station shall not be transported by dragging the charging
connector and the charging cable.
In order to ensure the long-term stable operation of the product, it is recommended to avoid
installing charging stations in extreme weather as far as possible, especially low or high
ambient temperature may affect the installation effect due to thermal expansion and cold
contraction.
The electrical power supply cable must be prepared. Please refer to Clause 4.3.1 to select the
power cable.
Space requirement: When the charging station is fixed on the wall, the minimum space
requirements are shown in Fig. 5-2.
– 16 –
HN10 Series AC EV Charging Station
User Manual
Fig. 5-2 Minimum space requirements for wall mounting It is suggested that the
charging station should be installed in a place with good ventilation, no
direct sunlight and shelter from wind and rain. In order to ensure good
ventilation condition, you should mount the charging station vertically and
leave enough space. Tools for installation Prepare the following tools at
least before installing the AC EV charging station.
Sr No.
Tools’ Name
Schematic Picture
Main Uses
1
Multimeter
Check the electrical connection and measure the voltage
2
Electric Impact drill
Drill fixing holes in the wall – 17 –
HN10 Series AC EV Charging Station
3
Wrench
User Manual Fastening bolt
4
Diagonal plier
Cut the cable
5
Wire stripper
Peeling cables
6
Crimping plier
Pressed cable terminal
7
Cross screwdriver
Fastening screw
5.3. Power supply system
HN10 series products are suitable for installation in TN power supply system.
a) TN-S power supply system wiring mode
Fig. 5-3 HN10 work in TN-S system b) TN-C power supply system wiring mode
Earth rod should be installed as far as possible to ensure that household
electrical equipment can be effectively protected zero connection. The Fig.5-4
shows the TN-C power supply system – 18 –
HN10 Series AC EV Charging Station
with earth rod.
User Manual
Fig. 5-4 HN10 work in TN-C system with earth rod In TN-C, for local earth rod
where there is no condition to install, a series of circuits are set inside
HN10 to protect safety. Even if leakage fault occurs when PEN is disconnected
or three-phase voltage is unbalanced, HN10 can quickly interrupt charging and
protect the personal safety of users. c) TN-C-S power supply system wiring
mode The connection method is the same as that of TN-S power supply system.
5.4. Installation steps
Install the Charging station on the wall follow the steps as below. Step 1:
Drilling
Fig. 5-5 Wall-mounting accessories-D Drill 4 holes with diameter of 6mm and depth of at least 50mm on the wall using
– 19 –
HN10 Series AC EV Charging Station
User Manual
wall-mounting accessories-E.
Step 2: Fixed the wallbox
As shown in Fig. 5-6, install wall-mounting accessories-A in the 4 holes in the wall.
Fig. 5-6 Fixed the Wall-mounting accessories-A As shown in Fig. 5-7,fixed the wall-mounting accessories-D to the wall using wall-mounting accessories-B.
Fig. 5-7 Fixed the wall-mounting accessories-D As shown in Figure 5-8, install the wall box on the Wall-Mounting accessory-D. – 20 –
HN10 Series AC EV Charging Station
User Manual
Step3: Wiring
Fig. 5-8 Fixed the wall box
[1] Input power cable [2] Charging cable
Fig. 5-8 Wiring As shown in Fig. 5-8, Connect the input cable to the input
terminal according to the wire size on the input cable. The installation is
complete.
5.5. Empty socket
HN10 series AC EV charging station config a type 2 charging connector. When
the charging – 21 –
HN10 Series AC EV Charging Station
User Manual
station is in standby state, please plug the charging connector in the empty connector socket in
order to protect the charging connector. Please use expansion screws to fix this empty socket
at a suitable position beside the charging station.
Fig. 5-10 Empty socket
– 22 –
HN10 Series AC EV Charging Station
User Manual
6. OPERATION
6.1. Power on
After the charging station has been installed and confirmed, switch on the
power supply. The indicator light lights up and the charging station switches
to standby state.
6.2. Human-Machine Interface
6.2.1. Overview As shown in Fig. 6-1, HN10 series product is configured with
multiple human-machine interfaces.
[A] Indicator lights: It is used to show indicate system status Swipe card
area: Swipe the RFID card to charging
[B] Charging control button: Start or stop charging by press for Button-
controlled charging Fig. 6-1 HMI of AC EV Charging Station
6.2.2. LED indicators The LED indicators on the panel are used to indicate the status of the charging station and the various combinations of indicators are described as below.
Indicator No.
Color
Connotation
1
Red-Green-Blue
Breath In turn :LED power on self test
– 23 –
HN10 Series AC EV Charging Station
2
Green
3
Blue
4
Purple
Red-yellow 5
alternate
Red-blue 6
alternate
On :Standby status On :connected to an EV Twinkle: Start charging state Breath : Charging status Twinkle: Charge-end status
User Manual
Fault status: detail on Chapter 7.1
Upgrade – status
6.2.3. RFID reader In general, the charging station is equipped with RFID card reader as standard, and the charging process can be started and stopped by using the RFID card (shown as Fig. 6-2) configured with the host. The special customized card swiping function is not separately described here.
Fig. 6-2 RFID card
6.2.4. Charging control button
You can press the button to control charging, when HN10 work in button- controlled mode.
Start charging: plug the charging connector into EV socket, press button to start charging.
Stop charging: press button again will end the charging, when EV is in charging.
6.3. Start Charging
a) Park your EV into place, turn off, and put the EV under braking.
b) Pick off the charging connector form empty socket of EV charging station.
– 24 –
HN10 Series AC EV Charging Station
User Manual
c) As shown in Fig.6-6, plug the charging connector into the AC charging socket of the EV.
d) For the charging control mode of “Button-controlled”, press the button after EV connector
plug in, the charging will start automatically.
Fig. 6-6 Plug into EV socket
e) For the charging control mode of “Card-controlled”, you can control charging process by
swipe RFID card after charging connector plug in.
f)
If you are equipped with Bluetooth, you can control charging process by using APP after
charging connector plug in.
If you want to scan QR code on the screen to start charging, please download
and install the WE E-Charge APP on your smart phone.
For Android phone, scan the QR code on the right, and click “Android Download”
button to download and install the APP.
WE E-Charge
For iPhone, search “WE E-Charge” in APP Store or scan the QR code on the right to install APP.
The user manual of APP please refer to the FAQ of APP.
– 25 –
HN10 Series AC EV Charging Station
6.4. Normally stop charging
User Manual
a) The charging station will automatically stop when the electric vehicle is fully charged.
b) For the charging control mode of “Button-controlled”, you can stop charging by press
button again, when EV is in charging.
c) For the charging control mode of “Card-controlled”, you can stop charging by swipe your
RFID card again, when EV is in charging.
d) When the charging is end, please unplug the charging connector and plug back to the empty
socket of charging station.
e) For the charging control mode of “App-controlled”, you can stop charging by APP, when EV
is in charging.
6.5. Abnormally stop charging
a) Forced fault stop: A fault stop initiated by the onboard charger of vehicle.
b) Automatic fault stopA fault stop initiated by the charging station.
– 26 –
HN10 Series AC EV Charging Station
User Manual
7. FAULT HANDLING AND MAINTENANCE
7.1. Fault Handling
The charging station is automatically protected in the event of the fault. The
fault information and handling methods are as follows.
LED indicator information All LED are not on
Fault code
Handling method
Check whether the power supply and distribution are normal;
Check whether the branch breaker is tripped, and close the breaker after
troubleshooting;
Check whether the connection is correct, if the cable comes off, should be
properly connected to tighten the cable.
Red: Flash1 Yellow: Flash1
Red: Flash1 Yellow: Flash3
Fault code 11:
Check the connection of charging connector
CP
voltage
and EV socket.
anomaly
Disconnect and reconnect the charging
connector.
Fault code 13:
Check whether the input cable is reliably
Undervoltage
connected.
input
Check whether the input voltage is abnormal.
Red: Flash1 Yellow: Flash4
Fault code 14: Overvoltage input
Check whether the input cable is connected correctly.
Check whether the input voltage is abnormal.
Red: Flash1 Yellow: Flash5
Fault code 15: Over-temperature protection
Check whether the charging station is covered or installed in a high temperature environment.
– 27 –
HN10 Series AC EV Charging Station
User Manual
LED indicator information
Red: Flash1 Yellow: Flash7
Fault code
Handling method
Fault code 17:
Check whether the charging connector and its
Leakage protection
cable are damaged or wet.
Recover after pulling out the adapter.
Red: Flash1 Yellow: Flash8
Fault code 18: Output shortage
Check whether the charging adapter and its cables are damaged or wet.
Red: Flash1 Yellow: Flash9
Red: Flash2 Yellow: Flash1
Red: Flash2 Yellow: Flash2
Fault code 19:
Check whether the charging connector is
Output overcurrent
correctly connected.
Check whether the OBC is normal.
Check the set of output current.
Fault code 21:
Battery of EV is full. Or the charging connector
EV response
is not properly connected.
timeout
Disconnect and reconnect the charging
connector.
Fault code 22:
This EV does not meet the IEC standards and
EV not supported
cannot be charged.
Red: Flash2 Yellow: Flash3
Fault code 23: Relay sticking
The device is damaged and needs to be returned to the factory for repair.
Red: Flash2 Yellow: Flash4
Fault code 24: RCD fault
The RCD is damaged and needs to be returned to the factory for repair.
– 28 –
HN10 Series AC EV Charging Station
LED indicator information
Fault code
Fault code 25:
Red:Off
Ground fault
Yellow: On
User Manual Handling method Charging station is not grounded; input power cable needs to be checked.
Red: Flash2 Yellow: Flash6
Fault code 26
The ground cable has leakage current, and the
Ground leakage
charging pile needs to be restarted
current
7.2. Maintenance
To ensure the long-term stable operation of the equipment, please maintain the
equipment regularly (usually every month) according to the operating
environment.
a) The equipment is maintained by professionals. b) Check whether the
equipment is well grounded and safe. c) Check whether there are potential
safety hazards around the charging pile, such as whether
there are high temperature, corrosion or inflammable and explosive articles
close to the charging station. d) Check whether the join point of the input
terminal is in good contact and whether there is any abnormality. Check
whether other terminal points are loose.
– 29 –
HN10 Series AC EV Charging Station
WARRANTY AGREEMENT
User Manual
1. The scope of warranty refers to the product itself. 2. The warranty period
is 12 months. During the warranty period, the company will
repair the product free of charge in case of failure or damage (determined by
the company’s technical personnel) under normal use. 3. The starting time of
warranty period is the date of product manufacture. 4. Even in the warranty
period, a certain maintenance fee will be charged in case of the following
situations.
Equipment failure caused by not following the user’s manual. Equipment damage
caused by fire, flood, abnormal voltage, etc. Equipment damage caused by using
the product for abnormal functions. Equipment damage caused by foreign matter
entering. Equipment damage caused by other human external factors. 5. The
service fee shall be calculated according to the actual cost. If there is
another contract, the contract shall prevail. 6. Please be sure to keep this
card and show it to the maintenance personnel during the warranty period. 7.
If you have any questions, please contact the agent or our company directly.
After sales service center
– 30 –
HN10 Series AC EV Charging Station
User Manual
DECLARATION OF CONFORMITY(DOC)
We, declare that the construction of the device described in the following
complies with the relevant stated below.
Relevant EC directives: Directive 2014/53/EU on radio equipment and
telecommunications terminal equipment (RED Directive 2014/53/EU).
Harmonized EN basic and engineering standards: EN 61851-1:2019; IEC
62955:2018; EN 61851-21-2:2021,CLASS B;
– 31 –
HN10 Series AC EV Charging Station
User Manual
COMPLIANCE STATEMENT OF WEEE
This product cannot be discarded at will when it is abandoned. It must be collected separately for special treatment.
– 32 –
HN10 Series AC EV Charging Station
8.
User Manual
– 33 –
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>