CoolWear SW071 Smart Watch User Manual
- August 22, 2024
- Coolwear
Table of Contents
CoolWear SW071 Smart Watch
Product Information
Specifications:
- Model: SW071
- Compatibility: iOS 9.0 & above, Android 5.0 & above
- Functions: Multiple sports modes, weather information, heart rate monitoring, sleep monitoring, blood oxygen saturation monitoring, finding my phone, message notifications, etc.
- Waterproof: Not suitable for diving or swimming in the sea; not suitable for hot water baths, hot springs, saunas, etc.
Product Usage Instructions
-
Charging and Initial Setup:
Ensure the battery is fully charged before using the watch for the first time. -
APP Download and Updates:
Scan the QR code to download and install the compatible APP on your mobile device. Ensure the firmware and APP are updated to the latest version for optimal usage. -
Connecting to the Mobile APP:
-
Turn on Bluetooth and GPS on your mobile phone.
-
Connect the device directly with the mobile APP by following the instructions provided in the manual. Do not connect the watch with the phone’s Bluetooth directly.
-
Watch Functions:
The smartwatch supports various functions such as multiple sports modes, weather information, heart rate monitoring, sleep monitoring, blood oxygen saturation monitoring, find my phone, message notifications, and more. -
Changing Watch Face:
You can change the watch face by long-pressing on the home page or customizing it via the APP’s watch face store. -
Step Counting, Blood Oxygen Monitoring, and Sleep Monitoring:
The watch provides step counting, blood oxygen monitoring, and sleep monitoring features. Check historical data in the APP for detailed records.
FAQ
-
What should I do if my watch disconnects from the mobile APP?
If your watch disconnects, try reconnecting it by following the initial setup steps mentioned in the manual. Ensure Bluetooth and GPS are turned on in your mobile phone settings. -
How often should I charge the watch?
We recommend charging the watch regularly to ensure uninterrupted usage. It is advisable to charge it when the battery level is low to avoid any disruptions in functionality.
Thanks for purchasing this product.
please make sure the battery is fully charged before using the watch for the
first time
Note:
Waterproof performance – The device is not suitable for diving or swimming in
the sea; and not suitable for hot water baths, hot springs, saunas, etc.
APP Download
-
Scan the QR code to download and install the APP.
Note: Downloading the APP on iPad or Tablet is not supported. -
Compatible with iOS 9.0 & above and Android 5.0 & above.
-
If the watch’s firmware or the APP is not the latest version, it may affect the usage of the watch or the APP. Please update the watch’s firmware and the APP to the latest version.
-
Firmware Upgrade: [CoolWear] → [Device] → [Firmware upgrade] → [upgrades].
-
APP Upgrade: [CoolWear] → [Profile] → [About] → [update].
APP Connection
- Turn on Bluetooth and GPS on your mobile phone. Ensure the watch is not paired with other phone
- Connect the Device directly with the Mobile APP: APP-[CoolWear] → [Device] → [Add a device] → Tap on the searched watch name to pair it. Do not connect the watch with the phone’s Bluetooth directly.
Mobile Phone Setting
Ensure that the permission of notifications of APP in your mobile phone is turned on: [Mobile phone] → [Settings] → [Notifications] → [Permissions] → [CoolWear] Set all permissions to ON.
- Special Note 1: For Apple phones with an operating system above iOS 12, go to [Settings] → [Bluetooth] → [Device name] → tap → [Share system notifications] → Ensure it’s ON.
- Special Note 2: If you open an application (WeChat/Skype/WhatsApp, etc.) both on your computer and mobile phone, then no notification message will be displayed on the watch.
- Special Attention: Android phones will automatically clean up the infrequently used apps, causing apps to be closed in the background. Please turn on the relevant permissions to ensure normal use.
Watch Functions
smart watch supports a variety of functions: multiple sports modes, weather information, watch face store, heart rate monitoring, sleep monitoring, blood oxygen saturation monitoring, find my phone, message notifications, etc.
Function Descriptions
-
DND, setting, brightness, flashlight, bt call.
-
Screen locker, always-on mode, AI voice control, find phone on the home page, swipe from top to bottom
-
Ai Voice assistant
- First please make sure the watch is connected to the App Coolwear, and turn on the watch’s audio bluetooth
- Then slide from top to bottom on the home page and tap the icon.
- Now you can control your phone’s voice assistant with voice commands from your watch.
-
Change Watch Face
- Method 1: Long press on the home page, then slide to switch the watch face and click to select.
- Method 2: Customize the watch face and change the watch face via the APPs watch face store: [CoolWear] → [Device] → [Watch faces] → [More] → [Select picture] → OK to download and change it with the new watch face (Do not leave the download interface until the download is 100% completed).
-
Step Counting: Activity data resets every day after 00:00, and you can check the history records in the APP
-
Heart Rate Monitoring: lt measures your heart rate data. To measure your heart rate: Turn on the heart rate monitoring function, and after 2 seconds it will automatically measure the heart rate, then wait for about 10-20 seconds until the measurement is completed. Besides, if you need 24H automatic heart rate monitoring, you can also set this function in the APP: [CoolWear] → [Device] → Turn on [Automatic heart rate detection].
Notes: -
Ensure the sensor at the back of the watch slightly touches the skin and the wristband is not too tight or too loose.
-
If you need to measure the exercise heart rate, please go to the exercise mode for measurement.
-
Blood Oxygen Monitoring: lt measures your blood oxygen saturation data. You can check the historical measurement results in the APP’s blood oxygen interface.
-
Sleep Monitoring: It records your sleep data, and you can check the history records in the APP (Default sleep monitoring period: 8:00 pm-10:00 am.)
-
Weather: You need to connect the watch and the CoolWear APP to get the weather information in your location. Moreover, you can go to [CoolWear] → [Profile] → [Unit Setting] → [Temperature] to switch between ℃ and ℉.
Note: The weather information displayed on the smartwatch is obtained from a third-party weather service provider. If your smartphone and smart watch obtain weather data from different weather service providers, then the displayed weather information may also be different. -
Calling funtion
-
Step #1：
After the Android phone connects to the watch by App for the first time successfully, wait for about 10 seconds, and the APP page will pop up an audio Bluetooth pairing request, just click to pair.
After the Iphone connected to the watch via the App successfully, it will automatically pair the audio Bluetooth of the watch. -
Step #2：
Audio Bluetooth→Open. -
Step #3: Notes:90s after a phone call, the watch will automatically enter the “low power consumption mode”, and the button will show grey, when the [incoming call notification] permission in the APP is turned on, it will be automatically activated when there is an incoming call.
-
Step #4: After connecting the audio BT. Users can click the right-pointed icon to enter into the dial page to dial the phone out. or check the contact list or check call history
-
Step #5: Sync the contact list Go to the app, in the telephone directory, and click “ + ” to input the contacts the user needs to call in daily life then it will sync to the watch contact list as long as the app is connected.
-
-
Music Control: (Connect the watch with the app and switch to the music page) 1. The watch can control the music playback on the phone and control volume 2. Play the music via the watch speaker: Connect the audio BT to the phone setting→go to the music interface, The watch speaker shall play the music, Please stay in the music interface, otherwise, after 90 s, it will enter the power saving mode, If you want to play again, it needs to turn on the [Audio Bluetooth] manually again.
-
Multiple sports modes: Exercise data will be automatically synchronized to the APP when connected, and you can check the detailed data records in the sports mode in the APP.
Notes: The watch is not built with GPS. But the GPS track function can be used in the Sport mode of the app -
Breathing Exercises: Follow the on-screen instructions for inhalation and exhalation (Breathing exercises help relax a person’s mood, reduce psychological stress, and improve vital capacity).
-
Shutter (watch should be connected to the APP)
- Method 1: In the APP: Go to [CoolWear] → [Device] → [Easy camera], and click the shutter button to take a photo.
- Method 2: On the watch: Click the shutter button on the watch’s interface to take a photo, or shake your arm to take a photo automatically.
-
Sedentary Reminder: Go to [CoolWear] → [Device] → [Sedentary reminder] to enable/disable this function. If the watch detects not enough activities or steps during the set period, the sedentary reminder function will be enabled, and the watch will then remind you every hour.
-
Alarm Function: Go to [CoolWear] → [Device] → [Alarm] to set alarms according to your needs. Up to 5 alarms can be set (The alarm will only give a reminder when the set time is more than 2 minutes).
-
Call Reminder: Go to [CoolWear] → [Device] → [Call reminder] to enable/disable this function. After the call reminder function is enabled, then the watch can remind you of the incoming calls on your phone. Note: The watch cannot be used to answer calls or reply to messages. It can only display messages or reject incoming calls.
-
Wake Screen on Wrist Raise: Flip your arm, and the screen will automatically light up.
-
Message Notification: The watch can save the latest 5 messages.
-
Menu style change: the watch is built with 5 sets of menu options. On the home page, Slide to the left to enter the menu. and quickly double the crown button to switch to another set of menu
-
Customize the main pages of Right Swipe: when we continuously swipe the screen from left to right, it comes with sports activity, heart rate, sleep, weather, and so on. The last page is a “+”, to which the user can add the feature he wants to put also when the user wants to remove some of the above feature pages and replace them with another feature page (widget), the user can long touch the screen center for 3 seconds, it comes up with a delete icon user can swipe and choose which feature (widget ) to delete and press the crown button to exit, later user can again add a new feature page in the section of “ +” and delete the feature page with the “–” icon
-
More: Calendar, Stop Watch, Countdown to enter from the menu
Note:
The watch is equipped with a charging cable. and its charging current watch
can take under 5V/1.5A.