STING Ray ST-HP3501A Electric Stove User Manual
- August 21, 2024
- STING Ray
Table of Contents
STING Ray ST-HP3501A Electric Stove
Parts list
- Body
- Plate
- Cooling outlet
- Control panel
IMPORTANT SAFETY INSTRUCTIONS
Read this manual carefully before using the appliance and save it for future reference.
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
USAGE
Standby mode
After you have connected the device’s plug to the main supply, the device is
in standby mode. A signal will sound. The display will show”- – – -” and the
“ON/OFF” indicator light is on.
- Put a suitable pot on the cooking zone.
- Press button.
- Then press , the display will show the starting power of 2000 watts. Press “-” or “+” button to select power from 200 to 2000W. There are 8 levels of power are selectable: 200/500/800/1000/1300/1600/1800/2000W.
NOTE : Please observe that the cooking behavior in the pots differs. It depends on the nature andthe quality of the cooking vessels.
Multicook function
After you press button, you can press button. Initial setting start 1600W,
press “-” or “+” button to select power from 200 to 2000W.
Set up timer/preset
-
Press button.
-
Press or , then press button. The display shows”0:10″.
-
Briefly press the “-” or “+” button to set the time in increments of one minute. Other wise, long press the “-” or “+” button to set the time in increments of ten minute. The display will show the desired setting
NOTE : This timer means the device will keep working for the time you input. After the set time has elapsed, the device will come back to standby mode. You can select from 0-3 hours. -
You may change the previous timer at any time. The other settings will remain.
-
To cancel the timer, select the display to “0:00”. The cooking plate will keep the function which you have chosen before. You may also turn the appliance off directly with the button.
PAN RECOGNITION
The device has a pot recognition function. It gives several warnings to
indicate that the cookware has been removed. The message“E0″ appears on the
display. For safety reasons, the appliance will switch to standby mode after
about 60 seconds. The fan may continue running. In this context, please pay
attention to the following:
WARNING : After use, the hot plate is to be switched off by means of its
regulation and control devices (ON/OFF button ) and not just by pan
recognition.
WARNING : Hazard of burns!
Because of the heat radiated during cooking, dangerously high temperatures may
occur at the cooking zone after the cooking cycle.
Choosing the dishes
In order for the induction cooker to work correctly, it is necessary to use
dishes whose bottom is ferromagnetic (attracts a magnet).
Dishes made of the following materials are not suitable for induction cookers:
clay, glass or aluminum.
Do not use the following types of pots:
- Pots with curved (convex/parabolic) bases.
- Dishes with a base diameter of less than 12 cm. The recommended diameter of the base is from 12 to 22 cm.
- Dishes on legs.
ATTENTION : Dishes made of glass, ceramics, non-ferrous metals, with a bottom made of aluminum or copper, diches with bottom diameter less than 12 cm is NOT SUITABLE!
ERROR MESSAGES
During operation the following error messages can be displayed:
Errors| Check whether plug is swtiched on.
Check whether the electricity is cut off.
---|---
BI Sound| Check whether the pot used is suitable or not.
Check whether the pot is on the cooking zone centre. Check whether the pot bottom diameter bigger than 12cm.
Warning Signal E0| Check whether the suitable pot is used.
Check whether the pot is put on the cooking plate
Warning Signal E1| IGBT sensor short or fault circuit
Warning Signal E2| IGBT over-heating protection code
---|---
Warning Signal E3| Electricity voltage too high （>280V）
Warning Signal E4| Electricity voltage too low （<85V）
Warning Signal E5| Main temperature sensor short or fault circuit
Warning Signal E6| Dry frying/boiling/cooking protection
Warning Signal E9| Check whether the errors on system(no coil)
SPECIFICATION
- Power supply Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE
- 220-240 V ~ 165, RAINBOW NORTH STREET, NINGBO, CHINA
- 50/60Hz Made in China
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.) Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Current information about service centers is available on the website https://stingray.ru/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>