NPET WF100 Cat Water Fountain User Manual

NPET WF100 Cat Water Fountain

INTRODUCTION

For keeping your cats healthy and refreshed, the NPET WF100 Cat Water Fountain is a new way to give them water. The 6 x 6 x 6-inch size of this small but effective water fountain makes it great for small spaces and works well for both cats and small dogs. With a constant flow of fresh, filtered water, the WF100 from NPET, a company known for high-quality pet products, pets will want to drink more. It works reliably because it has a connected electric source, so you don’t have to change the batteries very often. It’s only $19.99, and it comes with a cleaning brush, which makes upkeep easy and quick. Designed with today’s pet owners in mind, the NPET WF100 Cat Water Fountain is a must-have for any pet-friendly home. It’s both useful and simple to use, and it will help your pet stay healthy.

SPECIFICATIONS

WHAT’S IN THE BOX

• Water Fountain
• Manual

FEATURES

• Two Flow Modes: It has two flow options—a leaf-shaped mode and a gentle water mode—so you can suit your pet’s tastes and help them stay hydrated.
• Large Capacity: It can hold 54oz/1.6L of water, which is enough for small dog breeds and all cats. It also has an extra 200ml of water storage for situations.
• Bottom Suction Pump: This pump is very quiet and doesn’t use much energy. Its water intake is close to the bottom, so the water stays fresh and circulating.
• The three-layer Triple-Filtration System collects hair and other debris with a sponge, softens the water with ion exchange resin, and gets rid of bad tastes and smells with activated carbon.
• LED Light Design: The built-in LED light makes the fountain look nice and helps you keep an eye on the water level. It’s a stylish addition to your home.
• Easy to Use: It’s easy to set up and use, which is great for pet parents.
• Easy to Clean: Made so that it’s simple to take apart and clean, and the parts are strong enough to last through regular upkeep.
• Transparent Water Level Window: This window lets you see the water level right now and knows when it’s time to refill.
• Made of strong materials that will last for a long time, so it will always be a safe way for your pets to get water.
• Size: Measuring 6 inches by 6 inches by 6 inches, it’s small enough to fit in a lot of different places around the house.
• It comes in white, blue, and black, so it can match a variety of home decor.
• As long as you have a 5V/1A adapter or power bank on hand, you can run it without a wall plug.
• Attracts Pets: The leaf-shaped connection plays on cats’ natural instincts to get them to drink more water.
• One-Year Warranty: It comes with a one-year warranty that gives you peace of mind and a quality guarantee.
• Quiet Operation: The ultra-quiet pump makes very little noise, so it’s not annoying for pets or humans.

SETUP GUIDE

• Take the Fountain out of its box and make sure you have all of its parts, such as the fountain, the filter, and any extensions.
• Rinse Parts: Wipe down all of the parts with water before putting them together to get rid of any production residues.
• Insert Filter: Put the three-stage filtration system in the marked filter space.
• Assemble Fountain: To put together the fountain, follow the directions. If you want, you can also connect the leaf-shaped attachment.
• Add Water: Make sure the filter is fully submerged by filling the reservoir with water until the amount shown is reached.
• When you use a power charger, you need to connect it to the fountain. If you use a power bank, make sure it has 5V and 1A power.
• Turn On Fountain: Turn on the fountain and make sure the pump is working right. Make sure the water is flowing right.
• Check for Leaks: After putting the fountain together and running it for the first time, make sure there are no leaks.
• Position Fountain: Put the fountain somewhere safe that your pets can get to.
• Watch the Water Flow: Keep an eye on the water flow to make sure it works right and meets your pets’ drinking needs.
• Change Settings: If needed, change the flow mode to meet the wants of your pets.
• Clean Often: Clean the waterfall and water regularly to keep them working well.
• Watch the Water Level: Use the clear window to keep an eye on the water level and add more water as needed.
• Replace Filters: The filters should be changed every so often, as suggested by the maker.
• Connect the Power When Not in Use: If you need to keep the fountain, turn it off and remove the power.

CARE & MAINTENANCE

• Cleaning: At least once a week, clean the waterfall so that dirt and germs don’t build up.
• Filter Replacement: To keep the water quality at its best, replace the filters every one to two months or as directed by the maker.
• Check Pump: Check the pump often for any dirt or other things that might be blocking it from working properly.
• Fill Up with Water: Make sure the water level stays at or above the minimum amount shown so the pump works right.
• Wash Filters: Run water over the filters to get rid of any extra dirt before putting them back in the fountain.
• Check for Wear: Look for signs of damage or wear on the fountain and repair any broken parts right away.
• Clean Components: Take the bowl, pump, and filter compartment apart and clean all of their parts carefully.
• Avoid Harsh Chemicals: To clean the fountain, use water and soft soap instead of harsh chemicals.
• Dry Parts: Before putting the waterfall back together, make sure that all of its parts are completely dry.
• Check the Water Quality: Make sure the water is clean on a regular basis and change it if it looks or smells dirty.
• Check for Leaks: Check the fountain for leaks or drips every so often and fix them right away if you find any.
• Keep Power Source Dry: To avoid electrical problems, make sure that the power adapter and all of its links stay dry.
• If you don’t want to damage the fountain, keep it in a dry, cool place when not in use.
• Before adding water, test the fountain’s operation after cleaning and putting it back together.

TROUBLESHOOTING

power connection and plug in securely
Low water flow| Water level is low or filter is clogged| Refill the water and clean or replace the filter
Noise from the pump| Pump is clogged or not submerged properly| Clean the pump and ensure it is fully submerged
Water fountain leaking| Overfilled or improperly assembled| Ensure proper assembly and fill to the correct level
Water has an unpleasant odor| Dirty filter or stagnant water| Replace the filter and clean the fountain regularly
Pets not using the fountain| Unfamiliar or too loud| Gradually introduce the fountain and ensure it is placed in a quiet area
Fountain stops working intermittently| Power supply issue or dirty pump| Check the power supply and clean the pump thoroughly
Water flow too strong or weak| Incorrect pump setting| Adjust the pump setting for desired water flow
Algae growth in the fountain| Infrequent cleaning or direct sunlight| Clean the fountain more frequently and place it away from direct sunlight
Pump vibrating loudly| Pump is not securely placed| Secure the pump properly in its compartment
Filter not fitting properly| Incorrect filter installation| Ensure the filter is installed correctly
Water splashing out of the fountain| Incorrect water level or fountain placement| Adjust water level and ensure the fountain is on a flat surface
Pets tipping over the fountain| Fountain too light or improperly placed| Place the fountain on a non-slip mat or in a corner
Water not staying clean| Filter needs replacing or water needs changing| Replace filter and change water regularly

PROS & CONS

Pros:

1. Compact design fits easily into any space.
2. Continuous flow encourages pets to drink more water.
3. Includes a cleaning brush for easy maintenance.
4. Affordable price point.
5. Reliable corded electric power source.

Cons:

1. Regular cleaning required to prevent buildup.
2. Limited capacity may not suit multiple large pets.
3. Corded power limits placement options.
4. May require filter replacements for optimal performance.
5. Some pets may need time to adjust to the water flow.

WARRANTY

The NPET WF100 Cat Water Fountain comes with a one-year warranty, covering any defects in materials or workmanship. This warranty ensures that your purchase is protected, with NPET offering to repair or replace the product if any issues arise within the warranty period. Be sure to keep your purchase receipt to validate the warranty when needed.

FREQUENTLY ASKED QUESTIONS

What is the warranty period for the NPET WF100 Cat Water Fountain?

The NPET WF100 Cat Water Fountain comes with a one-year warranty.

What are the dimensions of the NPET WF100 Cat Water Fountain?

The NPET WF100 Cat Water Fountain weighs 1.28 pounds.

What is the price of the NPET WF100 Cat Water Fountain?

The NPET WF100 Cat Water Fountain is priced at $19.99.

What power source does the NPET WF100 Cat Water Fountain use?

The NPET WF100 Cat Water Fountain is powered by a corded electric source.

What is the item model number for the NPET Cat Water Fountain?

The item model number for the NPET Cat Water Fountain is WF100-03.

How does the NPET WF100 Cat Water Fountain work?

The NPET WF100 Cat Water Fountain works by continuously circulating water through a filter to keep it fresh and clean for pets.

What is the significance of the included cleaning brush with the NPET WF100 Cat Water Fountain?

The included cleaning brush helps in maintaining the NPET WF100 Cat Water Fountain by making it easier to clean and remove any debris or buildup.

How should the NPET WF100 Cat Water Fountain be cleaned?

To clean the NPET WF100 Cat Water Fountain, disassemble the parts and use the provided cleaning brush to scrub them thoroughly. Rinse with water and ensure all components are dry before reassembling.

What are the benefits of using a corded electric power source for the NPET WF100 Cat Water Fountain?

A corded electric power source ensures a consistent flow of water without the need for battery replacements, providing reliable and uninterrupted operation.

Why is my NPET WF100 Cat Water Fountain not turning on?

Ensure that the power adapter is securely connected to both the fountain and a functioning power outlet. Test the outlet with another device to confirm it works. If the fountain still doesn’t turn on, the power adapter or internal wiring may be faulty.

What should I do if the NPET WF100 Cat Water Fountain is not pumping water?

Check if the water level is above the minimum required level for the pump to operate. If the water level is sufficient, inspect and clean the pump to remove any debris. If the issue persists, the pump may need to be replaced.

Why is the water flow from my NPET WF100 Cat Water Fountain weak or inconsistent?

Weak or inconsistent water flow may be caused by a clogged filter or a dirty pump. Clean or replace the filter and ensure the pump is free of debris. If this doesn’t resolve the problem, adjusting the pump settings or replacing the pump might be necessary.

How can I fix my NPET WF100 Cat Water Fountain if it is making loud noises?

Loud noises usually indicate that the pump is not fully submerged in water or that air is trapped in the system. Ensure the water level is adequate and reposition the pump to release any air bubbles. If the noise persists, cleaning the pump or replacing it may be required.

What should I do if my NPET WF100 Cat Water Fountain is leaking water?

Check that all parts are properly assembled and securely in place. Inspect the seals and gaskets for any signs of wear or damage. If the fountain continues to leak, you may need to replace the faulty parts.

VIDEO – PRODUCT OVERVIEW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>