Thdstatic 67501 Jasper Bookshelf Instruction Manual

: August 21, 2024
: thdstatic

Table of Contents

Thdstatic 67501 Jasper Bookshelf
Specifications
What’s included
INSTALLATION INSTRUCTION
How to use
Safety first, fun later
Warranty
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Thdstatic 67501 Jasper Bookshelf

Specifications

SKU: 67501
Assembly Time: 80 minutes
Weight Limitation: 110 lbs max weight capacity

Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.

Estimated time for assembly

80:00

What you need

Some bubbly or your preferred relaxant
Use the packaging carton as a working surface to prevent product damage during assembly
Phillips head screwdriver
Drill
1/4” Drill Bit

Weight Limitation

110
lbs max weight capacity

Storage Cabinet Top Max. Capacity: 25lbs.
Adjustable Shelf Max. Capacity: 20lbs.
Bottom Cabinet Shelf Max. Capacity: 20lbs.
Open Shelf Max. Capacity: 15lbs. per shelf (x3)

What’s included

|

Description

|

Qty

---|---|---
A| Top Open Shelf Panel| 3
B| Cabinet Top Panel| 1
C| Cabinet Right Side Panel| 1
D| Cabinet Left Side Panel| 1
E| Cabinet Bottom Panel| 1
F| Adjustable Shelf| 1
G| Back panel| 1
H| Top Stretcher (Back)| 1
I| Bottom Stretcher (Back)| 1
J| Top Vertical Support (Left)| 1
K| Top Vertical Support (Right)| 1
L| Middle Vertical Support (Left)| 1
M| Middle Vertical Support (Right)| 1
N| Bottom Vertical Support (Left)| 1
O| Bottom Vertical Support (Right)| 1
P| Left Door| 1
Q| Right Door| 1
R| Top Stretcher (Front)| 1

| Description| Qty
---|---|---
1| M635mm Cam Bolt| 6
2| 1/4”32mm Hex Button Head Bolt| 28
3| Flat Washer| 32
4| Allen key| 1
5| M830mm Wooden Dowel| 12
6| 1510mm Cam Lock| 6
7| M435mm Screw| 9
8| 1/4”55mm Hex Button Head Bolt| 4
9| Barrel Nuts| 4
10| Shelf Pin| 4
11| M450mm Screw| 3
12| Wall Anchor| 3
13| M315mm Screw| 4
14| Magnetic catch| 2
15| Hinge| 4
16| M414mm Screw| 24
17| M414mm Screw| 4
18| Handle| 2

INSTALLATION INSTRUCTION

Step 1
Excited to build your new bookshelf? Let’s get started! Pick up the Right Side Panel (C) and Left Side Panel (D) and insert the M6*35mm Cam Bolts (1) into the designated holes as shown below.

Step 2
Now, connect the Right (C) and Left (D) Side Panels to the Top Panel (B). Use the 1/4”32mm Hex Button Head Bolts (2), Flat Washers (3), M830mm Wooden Dowels (5), and the Allen Key (4) for this. Tighten them to about 75% – we’ll fully secure these later.

Step 3
Find the Top Stretcher (Front) (R) and attach the Magnetic Catch (14) using the M3*15mm Screws (13) x4 and your screwdriver.

Step 4
Take the Top Stretcher (Back) (H) and ensure the “UP” text faces towards you, not the ground. Then, slide in both the Back (H) and Front (R) Top Stretchers. Secure them with the 15*10mm Cam Locks (6) using your screwdriver.

How to use

Did you know?
Cam locks are used to join two panels together, usually the edge of one to the flat side of another.

First, your cam bolt (or cam pin) will need to be properly inserted into the flat side of the board.
Important Note: Only tighten the cam bolt until it is secure. Do not over- tighten.
Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt.
Important Note: When installed properly, the head of the cam bolt will be visible through the larger hole on the side of the joining panel.
Next, you will notice the cam lock has a “C” shaped back. Commonly, an arrow on the front of the cam lock points in the same direction as the open section on back.
Using these as your cue, insert the cam lock into the large hole so the opening of the “C” fits over the head of the cam bolt.
Using a screwdriver, you will turn the cam lock until it stops, usually between 130º or 180º. You will feel the panels pulling closer until they are secured.
Important Note: Only turn the cam lock until the panels are fully engaged & feel secure. Turning too far may lead to hardware failure. Still having issues?: If a cam lock seems to be spinning in place or is not “catching” or pulling the panels together as expected , first remove the cam lock & try again while making sure that everything is properly positoned & oriented.
If you are still having issues getting things worki ng as expected, first remove the cam lock then unscrew the cam bolt slightly (less than 1 complete turn) to see if that helps with the alignment of the cam lock & bolt .

Step 5
Now locate the M4*3 5mm Screws (7) x6 and screw them into their designated holes as illustrated below.

Step 6
Next, slide the Bottom Stretcher (Back) (I) into its place on the assembly. Secure using 15*10mm Cam Locks (6) x2.

Step 7
The fun part! Slide the Back Panel (G) into its slots – it fits just like a puzzle piece. Quite satisfying, isn’t it?

Step 8
Insert the M830mm Wooden Dowels (5) x4 to the top of the assembly you’ve been working on. Next insert the Barrel Nuts (9) x4 into its corresponding holes. Now grab the Cabinet Bottom Panel (E) and push it into place.
You will use the Flat Washers (3) and the 1/4”55mm Hex Button Head Bolts (8) x4 on the shorter edges and M4*35mm Screws (7) x3 on the long edge. To tighten all of the components, you will use the Allen Key (4).

Step 9
Let’s get the frame built! Secure the Top Vertical Support (Right) (K), Middle Vertical Support (Right) (M), and Bottom Vertical Support (Right) (O) together.

Next join the Top Vertical Support

(Left) (J), Middle Vertical Support
(Left) (L), Bottom Vertical Support
(Left) using the 1/4”*32mm Hex Button Head Bolts (2) and Flat Washers (3).

Step 10
Attach the assembled vertical supports to the bookshelf using M830mm Wooden Dowel (5), 1/4”32mm Hex Button Head Bolts (2), and Flat Washers (3) x2. Secure them with the Allen Key (4).

Step 11
Secure the Top Open Shelf Panels (A) to the right supports. Ensure the holes are at the back before fastening with 1/4”*32mm Hex Button Head Bolts (2) and Flat Washers (3).

Step 12
It’s all coming together! Now secure the left supports using 1/4”*32mm Hex Button Head Bolts (2), Flat Washers (3), and the Allen Key (4).

Step 13
Choose your desired height and place the Shelf Pins (10). Then, carefully set the Shelf (F) on them.

Step 14
Grab the Right Door (Q) and the Left Door (P). Attach the Hinges (15) x4 over the larger holes using M4*14mm Screw (16) x8 and your screwdriver.

Step 15
First, fix the back end of the Hinges (15) inside the bookshelf with
M414mm Screws (16). Then, attach the Handles (18) using M414mm Screws (17).

Is your cabinet door looking crooked or unevenly spaced?
Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action. Step 16
Looking good! If the bookcase seems wobbly or uneven when placed against the wall, adjust the feet accordingly.

If you’re still having trouble lining everything up, your next step should be to adjust the leveling glides to square up the cabinet and doors and make sure things are level. Follow the instructions below:
If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.
If the left door appears to be hanging low, you can adjust the adjustable leveler on the front left until the door is better aligned.

Step 17
Safety first! Drill three 1/4” holes in the wall, spaced 338mm apart. Position the bottom Anchor 983mm from the ground. Insert the Wall Anchors (12).

Step 18
Last but not least, grab a friend and carefully line up your bookshelf to the Wall Anchors (12) and secure using the M4*50mm Screws (11).

No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

Our way

Their way

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

Safety first, fun later

We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment, please check our website at NathanJames.com/products

Safe use of this product starts with you.
Use this product responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.

Proper use

DO NOT use for commercial purposes
DO NOT frolic on bookshelf
DO NOT use bookshelf as foot stool
DO NOT leave spilled liquid on bookshelf
DO NOT use bookshelf if damaged
DO NOT make temporary repairs
DO NOT use outdoors

We are only in business if you’re happy
For starters, thanks for being you.

We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happenas humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty

This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q

Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our
prices low for your next purchase.

FAQ

Q: How do I adjust the Door Catcher for proper alignment?
- A: The Door Catcher can be adjusted from front to back for proper door alignment. Refer to Step 3 for details.