ATTACK SHRRK L60 Wireless Gaming Headset User Guide

ATTACK SHRRK L60 Wireless Gaming Headset

Product Information

Thank you very much for purchasing our Attack Shark product, and hope it can bring you a new operation and feeling. At the same time, we look forward to getting your valuable suggestions on our products, and we will continue to provide you with better products and services.

Contents list

• Wireless gaming headset x1
• Manual x1
• 2.4G receiver x1
• TYPE-C charging cable x1
• Type-C to 3.5mm audio cable x1

Indicator light description

1. Red light:  The battery is lower than 10%/always on when charging, and turns off when fully charged.
2. Blue light: Bluetooth connection mode
   • Blue light flashes quickly: Indicates pairing status, waiting for Bluetooth connection. (no beep)
   • The blue light is always on: indicating that the device is connected. (Beep sound: Bluetooth connection “connected”/Bluetooth disconnection “disconnected”)
   • Blue light flashes slowly: Indicates that no device is connected. (no beep)
3. White light: 2.4G connection mode
   • White light flashes quickly: Indicates that it is in pairing state and waiting for Bluetooth connection. (no beep)
   • The white light is always on: indicating that the device is connected. (no beep)
   • The white light flashes slowly: Indicates that no device is connected. (no beep)

Use suggestions:
When you first receive your headphones, we recommend that you fully charge them before use.

Unable to turn on the headset:

• The headphones will automatically turn off after 10 minutes of inactivity.
• Charge the battery.
• When the headset is not used for a long time, the battery may be in a dormant state. It is recommended to use a mobile phone charger to charge the headset to activate the battery.

Precautions:

1. Do not place the device in a place exposed to the sun, humidity or rain; make sure the device is between 0-40 degrees. If it exceeds this range, please unplug the device to bring the temperature to the optimal level.
2. Using this device at excessive volume for a long time may damage your hearing. In addition, the laws of some countries/regions stipulate that the maximum allowable sound level is 86 decibels and the allowed use time is 8 hours per day. Therefore, it is recommended that you reduce the volume to a comfortable level when using the device for a long time, and please protect your hearing.
3. The earmuffs of the headphones can easily absorb odors and maintain air circulation in the environment;
4. This product is not made of fireproof material. Please do not place/use flammable and explosive materials next to it.

Thank you very much for purchasing our ATTACK product, and hope it can bring you a new operation and feeling. At the same time, we look forward to getting your valuable suggestions on our products, and we will continue to provide you with better products and services.

Contents list

Quick Start Guide

Button function description

1. button :
2. Short press : Volume+ (voice prompt when the volume is maximum)
3. Long press : Previous song (no prompt sound)
4. button :
5. Short press : Volume· (no beep)
6. Long press : Next song (no beep)
7. button :
8. Short press : microphone on/off, turned on by default at power on (voice prompt: turn on “mic on”/turn off “mic off”)
9. button :
10. Press and hold for 3 seconds: ON/OFF (voice prompt: power on/ power off)
11. Short press when power on: play/ pause (no beep)
12. When the phone is turned on, short press: answer the call (phone priority, no tone).
13. When a phone call comes when the phone is turned on, press and hold: reject the call (phone priority, no prompt tone).
14. When the phone is turned on, short press 2 times in succession: Bluetooth/ 2.4G mode switching.

Indicator light description

1. Red light : The battery is lower than 10%/always on when charging, and turns off when fully charged. (insert charging icon)
2. Blue light : Bluetooth connection mode
3. Blue light flashes quickly: Indicates pairing status, waiting for Bluetooth connection. (no beep)
4. The blue light is always on: indicating that the device is connected. (Beep sound: Bluetooth connection “connected”/Bluetooth disconnection “disconnected”)
5. Blue light flashes slowly: Indicates that no device is connected. (no beep)
6. White light : 2.4G connection mode
7. While light flashes quickly: Indicates that ii is in pairing state and wailing for Bluetooth connection. (no beep)
8. The white light is always on: indicating that the device is connected. (no beep)
9. The white light flashes slowly: Indicates that no device is connected. (no beep)

Microphone operation diagram

Please match the microphone pin to the headphone jack slot and then tum on the phone.
Tip : If the microphone is not plugged in, the microphone is considered to be turned off and the voice recording function cannot be used.

Connection method

1. Bluetooth connection method : When the device is turned on, double-click the power button to switch, the blue indicator light flashes quickly, open the device and search for “L60/L80”, select the connection, the blue light is always on after Bluetooth pairing is successful (effective distance without barrier is 15 meters).
2. 2.4G connection method: When the device is turned on, double-click the power button to switch. The white indicator light flashes quickly. Insert the 2.4G receiver into the device. After the 2.4G pairing is successful, the white indicator light stays on and is ready for use (effective distance whout barrier is 10 meters).
3. Wired connection method : When the phone is turned off, use a Type-C to 3.5mm audio cable to plug in the headphones and the device.

Applicable equipment range : Win/ Mac/ PS4/ PSS/ XBOX/ SWITCH/ MOBILE

Use suggestions

When you first receive your headphones, we recommend that you fully charge them before use.
Unable to tum on the headset

• The headphones will automatically tum off after 10 minutes of inactivity.
• Charge the battery.
• When the headset is not used for a long time, the battery may be in a dormant state. It is recommended to use a mobile phone charger to charge the headset to activate the battery.

Headphones not connected to mobile device

• On mobile devices, turn off Bluetooth and tum it back on. Then try pairing again.
• Remove “L60/L80” from the mobile device’s Bluetooth list. Then try pairing again
• Move your mobile device closer to the headset and away from other distractions or obstacles.
• Try pairing with other mobile devices.

No sound

• Make sure the headset is turned on and the battery is charged.
• Make sure your headphones and mobile device (or music app) are turned on
• Try another music program.
• Try pairing with other mobile devices.
• Make sure the headphone volume is on.
• If two mobile devices are actively connected, please first ensure that the other device is in paused state. Poor sound quality:
• Keep your mobile device close to the headphones and away from any distractions.
• Try pairing with other mobile devices.

Automatic shut-down

• Tum on the headset. If pairing is not successful after 10 minutes, the headset will automatically turn off.
• After the headset is successfully paired with Bluetooth/ 2.4G, if there is no audio output for 10 minutes, the headset will automatically shut down.

Precautions

1. Do not place the device in a place exposed to the sun, humidity or rain; make sure the device is between 0-40 degrees. If it exceeds this range, please unplug the device to bring the temperature to the optimal level.
2. Using this device at excessive volume for a long time may damage your hearing. In addition, the laws of some countries/ regions stipulate that the maximum allowable sound level is 86 decibels and the allowed use time is 8 hours per day. Therefore, it is recommended that you reduce the volume to a comfortable level when using the device for a long time, and please protect your hearing.
3. The earmuffs of the headphones can easily absorb odors and maintain air circulation in the environment;
4. This product is not made of fireproof material. Please do not place/ use flammable and explosive materials next to it.

Care and maintenance

After each use, use a dry rag/paper towel to wipe off sweat stains and place it in a dry place.

FAQ’s

How do I turn on the headset?

Press and hold the power button for 3 seconds until you hear the voice prompt indicating the headset is powered on.

What should I do if the headset does not connect to my device?

Ensure Bluetooth is turned on, remove the headset from the Bluetooth list, and try pairing again. If the problem persists, try pairing with another device.

How can I improve sound quality?

Keep your mobile device close to the headphones and away from any distractions. Try pairing with other mobile devices if the issue continues.

What do the different indicator lights mean?

Red light indicates low battery or charging status. Blue light indicates Bluetooth connection status. White light indicates 2.4G connection status.

How do I switch between Bluetooth and 2.4G modes?

Double-click the power button to switch between Bluetooth and 2.4G modes. The indicator light will change color to show the current mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>