PEJE L10 TWS Bluetooth Headset User Guide

PEJE L10 TWS Bluetooth Headset

Specifications

• Product Name: XYZ
• Model Number: 12345
• Color: Black
• Material: Plastic
• Power Source: USB

Product Usage Instructions

Setting Up the Product

To set up the product, follow these steps:

1. Connect the Type-C cable to the designated port on the product.
2. Plug the other end of the Type-C cable into a power source.
3. Turn on the LED indicator by pressing the power button.

Using the Product

Once the product is set up, you can start using it by following these instructions:

1. Press the designated button to activate the product.
2. Adjust the settings according to your preferences using the control buttons.
3. For additional features, refer to the user manual for detailed instructions.

FAQs

• Q: How do I charge the product?
  • A: To charge the product, simply connect the Type-C cable to a power source and plug it into the product’s charging port.
• Q: What should I do if the LED indicator is not working?
  • A: If the LED indicator is not working, please check the power source and ensure that the connections are secure. If the issue persists, contact customer support for assistance.
• Q: Can I adjust the brightness of the LED light?
  • A: Yes, you can adjust the brightness of the LED light using the control buttons provided on the product.

Product Description

Please read the instruction manual carefully before using the product.

Overview and Packing List

The package includes a pair of earphones, a charging box, a certificate, a Type-C charging cable and instructions.

Wear

Take the earphones out of the charging box and put them on according to the left and right marks on the earphones.

Tip: After use, please put the earphones back into the charging box in time to extend the service life of the earphones and prevent loss.

Charge

• To charge your headphones:
  • Put the earphones into the charging box and automatically enter the charging state.
• To charge the charging case:
  • Plug in the Type-C charging cable to charge the earphones and charging box at the same time. When charging, the LED orange light flashes and remains on when fully charged.

Power on

Make sure the charging box has power and the earphones are in the charging box. Open the charging box and take out the earphones. The earphones will turn on automatically.

Shut down

• Put the earphones into the charging box and close the lid. The earphones will automatically disconnect and start charging. They will automatically shut down when fully charged.
• The headset enters the pairing state and is not in the charging box. If it is not connected to the device within 3 minutes, the headset will automatically shut down.

Connect

First-time connection

1. Please keep the distance between bluetooth earphones and mobile phones (or other connecting devices) within a range of 1 meter, the closer the better;
2. Open the charging case, remove the earphones and automatically turn them on and enter pairing mode;
3. Turn on the bluetooth function of the phone (or other bluetooth devices) and search or scan. At this time, the phone will search for all nearby bluetooth devices. Click on the name of the earbuds found: L10, and after successfully pairing and connecting, you can make phone calls and listen to music.

Connect other devices

1. The headset is reset and can be connected to new devices.
2. Turn off the bluetooth of the currently connected device, put the earphones into the charging box, close the cover and reopen it, and then you can search for and connect the earphones on the new device (without pairing record).

Automatic reconnection

Within the connection range, it will automatically connect to paired bluetooth devices after powering on.

Disconnected

When a device is connected, the headphones will be disconnected when the device turns off bluetooth, goes beyond the headphone connection range, or puts the left and rightheadphones into the case and closes the cover.

LED light description

• Charging compartment charging: orange light flashing
• Charging compartment fully charged: orange light always on
• Earphone charging: green light always on
• Earphones fully charged: green light off
• Low battery reminder for charging case: green light flashing when opening or closing the cover

Features
Hint:
1. The earphones may malfunction when you touch them when your hands become
dry due to cold weather outdoors.
2. Since the multi-function touch area of the device is sensitive, if you accidentally
touch this area when picking up and placing the headphones, it may trigger the
paired bluetooth device to perform the play/pause function.

• Call
  • Answer an incoming call:
  • Double-click on any multifunctional key when an incoming call comes in
  • Hang up the call:
  • Double-click on any multifunctional key during a call
  • Reject a call:
  • hold down the multifunction key on any headset for 2 seconds when an incoming call comes in
• Music
  • Previous song:
  • Three-click left earphone multifunctional key
  • Next song:
  • Three-click right earphone multifunctional key
  • Play/Pause:
  • when playing music, click any headset multi-function button to pause, and click again to play.
  • Volume reduction: Double-click on the left ear
    • Volume increase: Double-click on the right ear
• Other
  • Voice Assistant:
  • lona press the function key for 3 seconds

Basic parameters

• Product model: L10
• Headphone parameters
• Communication distance: 10 meters
• Wireless connectivity: Bluetooth Version: 5.3
• Product name: wireless headphones
• Charging box parameters
• Charging interface: Type-C
• Input parameters: DC5V 300mA

Security Information

Before using and operating the equipment, please read and comply with the following precautions to ensure optimal equipment performance and avoid dangerous or illegal situations.

• Product information and certification marks are located inside the charging box and on the earphones.
• To prevent possible hearing damage, do not use this product at high volume for long periods of time.
• To avoid interfering with the work of medical instruments, when using this device, please keep at least 15 cm away from implanted medical devices or personal medical devices (such as pacemakers, cochlear implants, hearing aids, etc.) and inform your physician or its manufacturer Ask about the limitations of this device.
• Please use the charging cable provided with the product to charge. If you use a power adapter to charge, you should use a power adapter that meets the requirements of the corresponding safety standards or a power adapter that has obtained CCC certification.
• Do not disassemble, hit, crush or throw the product into fire, as it may cause an explosion.
• The product contains a non-removable battery. Please do not replace the battery yourself to avoid damage to the battery or equipment. The battery can only be replaced by an authorized service center and must be replaced with the same type of battery. Replacing an incorrect type of battery will destroy protective measures (such as fire, explosion, battery leakage, etc.). If the battery is severely bulging, do not continue to use it.
• Do not put the battery into fire or high-temperature oven, or mechanically crush or cut the battery, as the battery may explode.
• Do not expose the battery to overheating environments such as sunlight, fire or oven, as this may cause the battery to catch fire or explode.
• Do not expose the battery to extremely high temperatures or extremely low pressure, as this may cause an explosion or leakage of flammable liquids or gases.
• Do not throw old batteries into domestic garbage. Dispose of this device and used batteries in accordance with local laws and regulations.
• This product is not a toy. The product body and accessories contain small parts that may cause suffocation or other injuries to children. Please keep the product out of the reach of children.
• If symptoms such as redness and swelling appear on the skin of the contact area, please stop using it immediately and consult a doctor.
• The symbol represents DC voltage.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>