TRIO 6475192xx Plafond Lamp Instruction Manual
- August 16, 2024
- Trio
Table of Contents
TRIO 6475192xx Plafond Lamp
Product Specifications
- Art.-Nr.: 6475192xx
- Type: 93816RD
- Frequency: 2.4GHz
- Power: < 100mW
- Input Voltage: 230V~50Hz
- Light Source: 1 x LED 45W
- Battery: 2 x AAA 1.5V
Product Usage Instructions
- Brightness 100% 2700K
- Brightness 50% 2700K
- Brightness 25% 2700K
Operation of the Remote Control
- On/Off
- Brightness regulator: Adjustment in stages
- Light color: Regulation in stages
- Mode: Cyclical modes switch
How to Use the Remote Control
- Press On/Off button to turn the light on or off.
- Adjust brightness by pressing the Brightness regulator button.
- Control light color by pressing the Light color button.
- Switch between modes using the Mode button.
Frequently Asked Questions (FAQ)
Q: How do I reset the remote control?
A: Disconnect the light from the mains for 10 seconds. Switch the light on
using the wall switch and press the ON button on the remote control
simultaneously. The successful programming is confirmed by flashing lights.
WARNING!
Before assembling, please read carefully the safety instructions!
This product contains light source(s) of energy efficiency class(es) F
Art.-Nr.: 6475102xx 6475192xx
[ Type: 93816RD ]
Description of how the light works without the remote control unit With the wall switch, you can select the following light modes by briefly turning it off:
- Brightness 100% 2700K
- Brightness 50% 2700K
- Brightness 25% 2700K
If the lamp is switched on again via the main switch/wall switch after more than 1 minute, the lighting scenario last set with the remote control is set (memory function).
Set up remote control
Please disconnect the light from the mains for 10 seconds. Then switch the
light on using the wall switch and at the same time press the “ON” button on
the remote control. After about four seconds, the light confirms the
successful programming by flashing several times. Now the light can be
controlled with the remote control. The disengaging of the remote control
works in the same way, except that the “OFF” button must be pressed instead of
the “ON” button.
Description of how the light works with the remote control unit
When the light is switched on, the light scenario last set with the remote
control is set (memory function).
Operation of the remote control
- 1. & 2. On/Off
- 3. & 4. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.
- 5. & 6. Light color: The regulation takes place in stages. The individual levels can be controlled by briefly pressing the button. The warmest or coldest color setting is reached more quickly by pressing the key continuously.
- 7. Mode: Cyclical modes switch
- 1. step: 2700K & 6500K
- 2. step: 4000K
- 3. step 6500K & 2700K
- 4. step: Night light
- 8. Night light
Declaration of Conformity
Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that
this product is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
Go to Article see the explanation below https://files.trio-lighting.com/ce-
conformity/6475102xx.pdf Go to Article see the explanation below
https://files.trio-lighting.com/ce-conformity/6475192xx.pdf
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>