LAB12 noyra Power Distributor, Conditioner Owner’s Manual

: August 14, 2024
: LAB12

Table of Contents

IT IS YOURS!
Unpacking
Features
Installation & Placement
Front Panel
Rear Panel Connections
Connections
Specifications
Warranty
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAB12 noyra Power Distributor, Conditioner

IT IS YOURS!

Thank you for purchasing Lab12 noyra. Noyra is an advanced power distributor / conditioner dedicated for high end audio video systems. Adequate and clean power is critical and important for the final performance of any audio or video device.
Keep in mind that noyra is totally handcrafted with perfectly matched parts of the finest selections.
Conductors of large cross section, star ground design, high quality tight sockets and industrial grade bindings, constitute the unshakable electrical network that delivers power to your system.
In order to reach the optimal performance your noyra needs at least 150 hours of listening. In this time all components go from “burn in” period to stable.
Before setting up your new noyra, we encourage you to read this manual thoroughly and get familiar with its features.
The information contained in this manual is subject to change without notice. The most current version of this manual is available on our official website at http://www.lab12.gr

Unpacking

Lab12 noyra should be removed from its box with care. After opening carton box, unpack noyra with your hands on both sides of the device.

Warnings

No user serviceable parts are included inside. Do not unscrew the cover; high voltages remain after disconnecting from mains. In case your device requires any kind of service, please ship or take your equipment directly to Lab12 or to one of our authorized dealers or other qualified personnel.

Features

EU, US, UK, Swiss outlets version
230V/50Hz, 115V/60Hz version
EMI RFI filtering
Overvoltage protection
5mm Aluminum face panel
Five Years Guarantee

Installation & Placement

Νoyra should be placed on a solid flat surface. You should avoid placing it near a heat source as this could compromise the performance and reliability. You should never place another component directly on top of this device. Make sure that your noyra has an adequate flow of air around it. Noyra could be warm in some points; this is normal and within parts specifications.
Take care of the front panel finest glass blasting anodized finishing using a soft dry cloth. No need to use any sprays or polishes. Never use cleaners containing abrasives, as this will damage the surface.

Front Panel

On the front panel you will see three LEDs (A), indicating that the device is powered on.

Rear Panel Connections

On the rear panel you will find the output sockets, the main inlet and the main power switch.
From left to right, there are four high filtered, low current outlets (A) and two low filtered, high current outlets (B).
On the right side of the rear panel, the main power inlet (D) and the power switch (C) are located.

Connections

Main connections

Connect a high grade 16A power cable to the IEC input and to your wall socket. Make sure that your wall socket provides a good ground before connecting the power.
Noyra is calibrated and tested connected with a Lab12 Knack 16A power cable. We strongly suggest using this cable.

Connect devices

You can connect any kind of audio-video devices on the total six power outlets on the back panel of noyra to exploit the conditioned power. Use low filtered outputs (B) to connect high current devices (power amplifiers, plasma tv etc.) and high filtered outlets (A) for low consumption devices (preamplifiers, cd players, DACs etc.). Live connection is always in the right pin of each outlet.

For the safety of your equipment

! Make sure that all your equipment is turned off before any connection.
! Never exceed the maximum limits of current for low and high filtered outlets (low filtered outlets max 3000W, high filtered outlets max 500W).

Specifications

Number of outlets: 6
High filtered outlets power (1-4) : 500W
Low filtered outlets power (5-6) : 3000W
Mains inlet: 16A IEC C14
Mains voltage: 230V / 50Hz (115V / 60Hz)
Available Colors: Matt Black, Frozen Silver
Dimension (WxHxD): 43x11x29 cm
Weight: 5 Kg

Warranty

Lab12 products are designed and manufactured to the highest standards and deliver high- quality performance, ease of use and ease of installation. We are confident that you will enjoy many years of good service from your product.
In the unlikely event of a failure of the product, we will arrange for your product to be serviced, free of charge, provided that the product was used in accordance with the instructions in the owner’s manual.
Lab12 could modify the design or specifications of any product without obligation to purchasers of previously manufactured products.

This Warranty is provided for the benefit of the first and original purchaser of the covered product and is not transferable to a subsequent purchaser.
Vacuum tubes are warranted for the original 90-day period only.
This warranty does not affect your statutory rights. EU rules 1999/44/ΕΚ.
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Lab12 reserves the right to change or modify any of the terms and conditions contained in this Warranty Statement, at any time and in our sole discretion. Any changes or modification will be effective immediately upon posting of the revisions on the Lab12 website, and you waive any right you may have to receive specific notice of such changes or modifications. In the event that there is a difference between this warranty and the provisions in any owner’s manuals, warranty leaflets, or packaging cartons, the terms of this warranty, as published on the official Lab12 website, will prevail to the fullest extent allowed by law.

For the warranty to be valid:

The Warranty card, which is placed outside the box of the unit, must be filled out by the authorized seller with the Model of the device, Serial Number, Color, Date of Purchase, Customer’s Name and Customer’s Address, as well as the authorized seller’s point sign.
A copy of the purchase receipt must also be attached to this card.
A photo of the completed Warranty card, along with the purchase receipt, must be sent to contact@lab12.gr by the end consumer within one month from the date of purchase.

What is Covered and how long this coverage lasts?

Only new products purchased through an authorized Lab12 dealer, importer or distributor are entitled for warranty coverage. The Warranty is limited to the first original purchaser and is inapplicable for secondhand products. This warranty covers defects in materials and workmanship in this product for 5 years (or a 90-Days Limited Warranty for vacuum tubes) after the date of purchase or no later than 6 years of the date of shipment to the authorized Lab12 dealer or distributor, whichever comes first.

What is Not Covered

This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, improper packing, and shipping (such claims must be presented to the carrier),
lightning, power surges, or other acts of nature.
This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any Tubes Swaps, Repairs or Modifications attempted by anyone unauthorized by Lab12, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.
This limited warranty does not cover vacuum tubes (after the 90-Day Limited Warranty), cartons, scratches on equipment enclosures, cables or accessories used in conjunction with this product.

What we will do to correct problem

During the Warranty Period, we will repair or replace, at no charge, products or parts of a product that proves defective due to defects in materials or workmanship, under normal use and maintenance.

How To Obtain Service Under This Warranty:

You are responsible for transporting your product to (as well as from, in the event that Lab12 finds no defect covered by this warranty) either Lab12 or an authorized point and for payment of all shipping charges. Lab12 will pay the return shipping charges (in the event you return the product to Lab12) if the repairs are covered by warranty, provided that, Lab12 reserves the right to choose the mode, the carrier and the timing of such return shipping (if Lab12 finds that there are no defects covered by this warranty, then you shall be responsible for all shipping charges).

Lab12 has authorized distribution in many countries of the world. In each country, the authorized importing retailer or distributor has accepted the responsibility for warranty of products sold by that retailer or distributor. Warranty service should normally be obtained from the importing retailer or distributor from whom you purchased your product. In the unlikely event that the technical service required is not possible to be fulfilled through the importer/distributor, this product must be returned to Lab12 main factory in Greece to fulfill the terms of this Limited Warranty at the purchaser’s expense (except purchasers that purchase their product directly from our main facilities in Greece), along with the Warranty card and a copy of the proof of purchase for the product. As mentioned above, the Warranty card must list the date of purchase, the model, color and serial number of the product, the name and address of the purchaser and the authorized dealer/importer/retailer detailed sign. Additionally, you must provide detailed information on the symptoms or difficulties you have observed with the product’s performance by completing a technical support form that will be provided to you by the authorized importing retailer, distributor or LAB12.

To obtain warranty service, you can also contact directly Lab12 at contact@lab12.gr or +30-2102845173, to determine the most appropriate solution for you. All warranty claims must be made in writing accompanied by the Warranty card and a copy of the proof of purchase.

Lab12 Single Member Private Company
Contact@lab12.gr
www.lab12.gr