LAB12 gordian Multifunctional Power Distributor, Conditioner Owner’s Manual
- August 15, 2024
- LAB12
Table of Contents
LAB12 gordian Multifunctional Power Distributor, Conditioner
Lab12 gordian – Multifunctional Power Distributor / Conditioner
Specifications
- Model: gordian Version: v1.8
- Address: K. Varnali 57A, Metamorfosi, 14452, Athens, Greece
- Contact: Tel: +30 210 2845173, Email: contact@lab12.gr
- Website: www.lab12.gr
Product Usage Instructions
Unpacking
Remove all foam protective pieces from the box and carefully unpack gordian by
placing your hands on both sides of the device.
Menu Structure
Access and update power line information and filter configuration through the
OLED display. Navigate through 11 menu screens using the Navigation
rotary/push knob.
FAQ:
Q: Can I place other components on top of gordian?
A: It is recommended to avoid placing any other components directly on top of
gordian to ensure proper performance and reliability.
Q: How should I clean the front panel?
A: Use a soft dry cloth to clean the front panel’s glass blasting anodized
finishing.
Owner’s Manual
Multifunctional Power Distributor / Conditioner
IT IS YOURS!
Thank you for purchasing Lab12 gordian. Gordian is an advanced power analyzer,
conditioner and distributor dedicated for high-end audio systems.
Keep in mind that gordian is totally handcrafted with perfectly matched parts
of the finest selections. OFC Conductors of large cross section, star ground
design, high quality tight sockets and industrial grade bindings constitute
the unshakable electrical network that delivers power to your system. In order
to reach the optimal performance your gordian needs at least 150 hours of
listening. In this time all components go from “burn in” period to stable.
Before setting up your new gordian, we encourage you to read this manual
thoroughly to properly acquaint yourself with its features.
The information contained in this manual is subject to change without notice.
The most current version of this manual is available on our official website
at http://www.lab12.gr
Unpacking
Lab12 gordian removal from its box should be handled with care. You should first remove all the foam protective pieces of the box and then unpack gordian. Unpack gordian placing your hands on both sides of the device.
Warnings
No user serviceable parts are included inside. Do not unscrew the cover; high
voltages remain after disconnecting from mains. In case your device requires
any kind of service, please ship or take your equipment directly to Lab12 or
to one of our authorized dealers or other qualified personnel.
Installation & Placement
Gordian should be placed on a solid flat surface. You should avoid placing it
near a heat source as this could compromise the performance and reliability.
You should never place another component directly on top of this device. Make
sure that your gordian has an adequate flow of air around it. Gordian could be
warm in some points; this is normal and within parts specifications. Take care
of the front panel’s glass blasting anodized finishing using a soft dry cloth.
Front Panel
Gordian front panel
- In the front panel you will see the OLED display, the Navigation rotary knob and the Operation Mode rotary knob.
- The left rotary/push knob (A) is there for navigation into device’s menu structure.
- The OLED display (B) is located in the middle of front panel. There, you can see all the interface menu details.
- The right rotary knob (C) selects the processor operation mode (On, Sleep, Auto).
Rear Panel Connections
Gordian rear panel
- On the rear panel you will find the output sockets, the main inlet and the main power switch.
- From left to right there are four high filtered, low current outlets (A) and two low filtered, high current outlets (B). When polarity is ‘ok’, the phase is always in the right-side pin of output sockets.
- On the right side of the rear panel, the main power switch (C) and the power inlet (D) are located.
Menu structure
All the information for your power line and the configuration of gordian’s filter is accessible and updatable through the device’s OLED display. You can switch among 11 different menu screens using the “Navigation” rotary/push knob on the left of the face plate. Rotate the knob to navigate through the menu and push it to perform any extra action. See below a brief description of the available menu items.
| Menu item| Description| Available Actions
---|---|---|---
1| Main AC information| Provides information about the most important
characteristics of your power line. That is RMS voltage, frequency, RMS
current and power consumption.|
–
2| THD Analysis| Provides information about the Total Harmonic Distortion of your system’s voltage and current signal.|
–
3| DC Voltage and Power Factor Analysis| DC voltage and Power Factor measurement.|
–
4| Ground and polarity check| Checks your socket’s ground and polarity.| Switch off gordian and invert the direction of your wall socket plug if you see a “Polarity: REV!” message. This is the best for the performance and safe operation of your devices.
If you see a “Ground: Broken!” or “Ground: Weak” message this means that gordian has detected a problematic ground connection. Check that your socket plug is firmly connected. If the message remains, then you may need to refer to qualified personnel to have your house’s electrical network inspected.
5| EMI noise| Measurement of the EMI noise of your line (frequencies > 10.000 kHz). Output measurement|
–
6| Voltage FFT| Frequency analysis of your line’s voltage. Inspect here the frequency content of your AC voltage signal (frequency range 50Hz-7kHz).| Push the rotary knob to inspect the frequency content of your voltage signal. You can see the gain of each frequency band by rotating the knob.
Push again to go back to the main menu navigation.
---|---|---|---
7| Current FFT| Frequency analysis of your system’s current. Inspect here the
frequency content of your AC current signal (frequency range 50Hz-7kHz).| Push
the rotary knob to inspect the current content of your current signal. You can
see the gain of each frequency band by rotating the knob.
Push again to go back to the main menu navigation.
8| Power factor correction configuration| Configures the power factor correction that your filter performs.| Push the rotary knob to select among the available power factor configurations. See paragraph ‘Power factor correction configuration’ below for more detailed information.
Push the button again to lock your selection.
9| EMI filter effectiveness configuration| Configures the EMI filter effectiveness.| Push the rotary knob to select among the available effectiveness levels. Read paragraph ‘Emi filter configuration’ below for more detailed information.
Push the button again to lock your selection.
10| EMI filter topology configuration| Configures the EMI filter topology.| Push the rotary knob to select among the available filter topologies. Read paragraph ‘ EMI filter configuration’ below for more detailed information.
Push the button again to lock your selection.
11| Standby current setup| Configures the standby current of your system.| Press and hold the rotary knob to update the standby current of your system. See paragraph ‘Operation modes’ below for more detailed information.
Power factor correction configuration
The power factor of your audio system indicates how effectively your system
absorbs power from your main AC line. The higher the power factor, the higher
the effectiveness of your system’s power consumption. You can inspect the
power factor of your system at the menu item 8.
WARNING! The power factor of your system may be improved by selecting the
proper power factor correction configuration in gordian. However, if the
configuration is not the proper one, this may have negative results in your
system’ s power factor. If you are not sure about what is the best option for
your system, set the PF correction mode to ‘AUTO’ and let gordian adapt the PF
correction to the needs of your system and the variations of your system’s
load. Note that PF correction is usually profitable for power loads greater
than 250W.
EMI noise filter configuration
- EMI noise is a high frequency electrical noise that affects the power line of all houses’ electrical networks. You can see the level of the EMI noise in the input of gordian at the menu item 5.
- Gordian, by default, filters a very large percentage of the EMI noise of your line. This noise reduction is occurred in both the input and the output of your gordian power filter. That means that the noise indication you see in the OLED display is the result of the filter existence in your house’s electrical network. However, the noise level in gordian’s output is always lower than the input’s level. EMI indication is factory set to output measurement.
- You can fine-tune the EMI filter by configuring the “Filter Effectiveness” (menu item 9) and “Filter Topology” (menu item 10) parameters. Feel free to experiment with these options and stuck to the one that gives you the best sounding result.
- In general, “HIGH” Filter effectiveness and “CMF + DMF” filter topology are the more drastic ones. You can take into account the measured EMI level (menu item 5) and the higher band levels of your system’s current frequency analysis (menu item 7) to decide on the best filtering configuration.
If you are not sure on what configuration to select, choose “AUTO” and let gordian automatically adapt the filter configuration by mathematically analyzing the frequency content of the signal and the levels of the EMI noise.
Operation modes
- On: Gordian’s processor is always active, and you can see the measurements, settings and automatic adjustments on the OLED display.
- Sleep: Gordian’s processor and OLED display are inactive. Power output sockets are active, but no changes are occurred on filters and other settings.
- Auto: Gordian processor goes to active state only when the standby current exceeds the set value.
- You can configure the operation of gordian’s processor with the rotary switch on the right side of the face plate. If you want the processor to be always active, switch the knob to the “On” position. If you want the processor to be in sleep mode (output sockets will stay alive), switch the knob to the “Sleep” position. If you want the gordian processor to become active only when your audio system is active and automatically go to sleep when you switch off your system, then you have to configure the “stand by” current of your system and switch the knob to the “Auto” position.
- To configure the “stand by” current, shut down all your system’s devices and navigate to the standby current setup (menu item 11). Press and hold the navigation button and gordian will store the current consumption of your inactive system. Rotate the operation mode switch to the “AUTO” position and the OLED display will now become active only when your system’s current consumption is great enough to indicate that your system is active.
Connections
Main connections
Connect a high grade 20A power cable to the IEC input and to your wall socket.
Make sure that your wall socket provides a good ground before connecting the
power cable. You can supply 230 to 240 Volt AC/ 50Hz (115 to 120 AC Volts /
60Hz). Check the polarity immediately after the first time of usage and
correct the wall plug if needed.
Gordian is tuned and calibrated using the Lab12 Knack mk2 Power Cable. We
strongly suggest using this cable.
Connect devices
You can connect any kind of audio-video devices on the total six power outlets
on the back panel of gordian to exploit the conditioned power. Use low
filtered outputs (B) to connect high current devices (power amplifiers, plasma
tv etc.) and high filtered outlets (A) for low consumption devices
(preamplifiers, cd players, DACs etc.). Live (phase) connection is always in
the right pin of each outlet. Never exceed the maximum limits of current for
low and high filtered outlets (low filtered outlets max 15A, high filtered
outlets max 4A).
For the safety of your equipment
- Make sure that all your equipment is turned off before any connection.
- Never exceed the maximum limits of current for low and high filtered outlets (low filtered outlets max 15A, high filtered outlets max 4A).
Features
- EU, US, UK, Swiss outlets version
- 230V/50Hz, 115V/60Hz version
- OLED display
- Adaptive EMI RFI filtering
- Adaptive Common and differential filters
- Adaptive Power Factor correction
- Overvoltage protection
- FFT analysis
- DC voltage analysis
- THD analysis
- Power consumption analysis
- AC voltage, current analysis
- Sleep mode system
- 5mm Aluminum face panel
- Five Years Guarantee
Specifications
- Number of outlets: 6
- High filtered outlets power (1-4) : 1000W
- Low filtered outlets power (1-2) : 3500W
- Mains inlet: 20A IEC C20
- Mains voltage: 230V / 50Hz (115V / 60Hz)
- Available Colours: Matt Black, Frozen Silver
- Dimension (WxHxD): 43x11x29 cm
- Weight: 8 Kg
Warranty
- Lab12 products are designed and manufactured to the highest standards and deliver high- quality performance, ease of use and ease of installation. We are confident that you will enjoy many years of good service from your product.
- In the unlikely event of a failure of the product, we will arrange for your product to be serviced, free of charge, provided that the product was used in accordance with the instructions in the owner’s manual.
- Lab12 could modify the design or specifications of any product without obligation to purchasers of previously manufactured products.
- This Warranty is provided for the benefit of the first and original purchaser of the covered product and is not transferable to a subsequent purchaser.
- Vacuum tubes are warranted for the original 90-day period only.
- This warranty does not affect your statutory rights. EU rules 1999/44/ΕΚ.
- This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
- Lab12 reserves the right to change or modify any of the terms and conditions contained in this Warranty Statement, at any time and in our sole discretion. Any changes or modification will be effective immediately upon posting of the revisions on the Lab12 website, and you waive any right you may have to receive specific notice of such changes or modifications. In the event that there is a difference between this warranty and the provisions in any owner’s manuals, warranty leaflets, or packaging cartons, the terms of this warranty, as published on the official Lab12 website, will prevail to the fullest extent allowed by law.
For the warranty to be valid:
- The Warranty card, which is placed outside the box of the unit, must be filled out by the authorized seller with the Model of the device, Serial Number, Color, Date of Purchase, Customer’s Name and Customer’s Address, as well as the authorized seller’s point sign.
- A copy of the purchase receipt must also be attached to this card.
- A photo of the completed Warranty card, along with the purchase receipt, must be sent to contact@lab12.gr by the end consumer within one month from the date of purchase.
-
What is Covered and how long this coverage lasts?
Only new products purchased through an authorized Lab12 dealer, importer or distributor are entitled for warranty coverage. The Warranty is limited to the first original purchaser and is inapplicable for secondhand products. This warranty covers defects in materials and workmanship in this product for 5 years (or a 90-Days Limited Warranty for vacuum tubes) after the date of purchase or no later than 6 years of the date of shipment to the authorized Lab12 dealer or distributor, whichever comes first. -
What is Not Covered
This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, improper packing, and shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature.
This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any Tubes Swaps, Repairs or Modifications attempted by anyone unauthorized by Lab12, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.
This limited warranty does not cover vacuum tubes (after the 90-Day Limited Warranty), cartons, scratches on equipment enclosures, cables or accessories used in conjunction with this product. -
What we will do to correct problem
During the Warranty Period, we will repair or replace, at no charge, products or parts of a product that proves defective due to defects in materials or workmanship, under normal use and maintenance.
How To Obtain Service Under This Warranty
You are responsible for transporting your product to (as well as from, in the
event that Lab12 finds no defect covered by this warranty) either Lab12 or an
authorized point and for payment of all shipping charges. Lab12 will pay the
return shipping charges (in the event you return the product to Lab12) if the
repairs are covered by warranty, provided that, Lab12 reserves the right to
choose the mode, the carrier and the timing of such return shipping (if Lab12
finds that there are no defects covered by this warranty, then you shall be
responsible for all shipping charges).
Lab12 has authorized distribution in many countries of the world. In each
country, the authorized importing retailer or distributor has accepted the
responsibility for warranty of products sold by that retailer or distributor.
Warranty service should normally be obtained from the importing retailer or
distributor from whom you purchased your product. In the unlikely event that
the technical service required is not possible to be fulfilled through the
importer/distributor, this product must be returned to Lab12 main factory in
Greece to fulfill the terms of this Limited Warranty at the purchaser’s
expense (except purchasers that purchase their product directly from our main
facilities in Greece), along with the Warranty card and a copy of the proof of
purchase for the product. As mentioned above, the Warranty card must list the
date of purchase, the model, color and serial number of the product, the name
and address of the purchaser and the authorized dealer/importer/retailer
detailed sign. Additionally, you must provide detailed information on the
symptoms or difficulties you have observed with the product’s performance by
completing a technical support form that will be provided to you by the
authorized importing retailer, distributor or LAB12.
To obtain warranty service, you can also contact directly Lab12 at
contact@lab12.gr or +30-2102845173, to determine
the most appropriate solution for you. All warranty claims must be made in
writing accompanied by the Warranty card and a copy of the proof of purchase.
Lab12 Single Member Private Company
Contact@lab12.gr
www.lab12.gr
We wish you to enjoy your new device exactly as we enjoyed it when we built it for you!
K. Varnali 57A, Metamorfosi, 14452, Athens, Greece Tel: +30 210 2845173 Email:
contact@lab12.gr
Web: www.lab12.gr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>