DaToo DT-090 Submersible Water Pump Instruction Manual
- August 14, 2024
- DaToo
Table of Contents
DaToo DT-090 Submersible Water Pump
INTRODUCTION
The DaToo DT-090 Submersible Water Pump is a superb combination of robustness and efficiency, precisely engineered to fulfill your water circulation requirements. This long-lasting pump is made of premium stainless steel, guaranteeing dependable performance even in harsh settings. With a maximum lifting height of 3.3 feet and a maximum flow rate of 360 liters per hour (95 GPH), it is ideal for hydroponic systems, small to medium-sized aquariums, and fountains. Because of its small size—just 1.8 x 1.7 x 1.2 inches—the pump is simple to install in confined areas. This pump, which DaToo introduced in 2023, uses a 5-watt AC motor to provide effective performance with minimal energy usage. At $9.79 , it is a great deal for the money and is supported by DaToo’s stellar reputation for quality and creativity.
SPECIFICATIONS
| Brand | DaToo |
|---|---|
| Material | Stainless Steel |
| Style | Submersible Water Pump |
| Power Source | AC |
| Item Weight | 7.4 Ounces |
| Maximum Flow Rate | 360 Liters Per Hour |
| Maximum Lifting Height | 3.3 Feet |
| Voltage | 110V~120V/60Hz |
| Power | 5 Watts |
| Max Flow Rate | 95 GPH (360L/H) |
| H-Max (Lift Height) | 3.0 ft (0.9m) |
| Pump Size | 1.8 x 1.7 x 1.2 inches |
| Power Cord | 5.9 ft (1.8m) |
| Free Tubing | 3.3 ft (1m) |
| Manufacturer | DaToo |
| Price | $9.79 |
| Warranty | One Year |
WHAT’S IN THE BOX
- Water Pump
- Nozzle
- Manual
FEATURES
- The Perfect Water Control System is a strong rotor with a stainless steel shaft that lessens water drag for increased durability and efficiency.
- High Flow Rate: Designed for small to medium-sized aquariums, ponds, and hydroponic systems, this system has a maximum flow rate of 95 GPH (360 L/H).
- Adjustable Flow Rate: This function lets you set the water flow according to your needs with four different levels of adjustment.
- Silent Operation: The pump’s sine wave mute technology allows it to run at a mere 25–30 dB, which makes for a quiet atmosphere.
- Compact Size: It is simple to hide in a variety of water features because to its compact size (1.8 x 1.7 x 1.2 inches).
- Robust Design: Constructed from corrosion- and wear-resistant stainless steel, increasing its durability and dependability.
- Safe Design: This pump is equipped with a fine mesh filter net intake to keep small fish or debris out of the pump.
- Resin Sealed Structure: For increased safety, the resin seal of the pump offers superior insulation by stopping both electric and water leaks.
- High Lift Capability: 3.3 feet of water lift capacity makes it suited for a variety of applications and water levels.
- Energy-efficient: Using only 5 watts of power, it’s an affordable water circulation solution.
- Versatile Installation: Four strong suction cups are included, enabling you to place it wherever in your pond or aquarium.
- Accessories Included: For simple setup, the pump is supplied with an extra nozzle and 3.3 feet of free tubing.
- Long Power Cord: The 5.9-foot power cord allows for flexible positioning and makes it easy to connect the pump to power sources.
- Versatile Use: Fit for a variety of uses, such as hydroponic systems, water gardens, ponds, aquariums, and fountains.
SETUP GUIDE
- Unpack the Pump: Take the pump and its accessories out of the container with care, and look for any damage.
- Choose Location: In your aquarium, pond, or other water feature, decide where you would like the pump to be placed.
- Install Suction Cups: Screw the four suction cups into the pump’s base and fasten it to the water feature’s surface.
- Attach Tubing: Attach the 3.3-foot tubing that comes with the pump to the outlet nozzle. To avoid leaks, make sure the connection is tight.
- Select Nozzle: Select the right nozzle and fit it to the pump according to your needs.
- Modify Flow Rate: Turn the 4-level adjustment knob to the desired water flow rate.
- Immerse the Pump: Make sure the inlet is totally immersed by immersing the pump completely underwater.
- Connect to Power: Make sure the 5.9-foot power cord is protected from water exposure by plugging it into an appropriate electrical socket.
- Turn on the pump and watch it operate to make sure everything is functioning properly.
- Verify the stability of the pump by making sure the suction cups are keeping it firmly in place and that it is steady.
- Monitor Flow: To get the appropriate circulation, keep an eye on the water flow and adjust as necessary.
- Examine for Leaks: Look for any indications of leaks in any of the connections, including the nozzle and tubing.
- Secure Power cable: To prevent any electrical hazards, place the power cable in a safe location away from water.
- First Operation Check: Make sure the pump is running smoothly and silently by keeping an eye on it for a few minutes.
- Frequent Monitoring: Keep an eye on the pump to make sure it’s safe and still operating well.
CARE & MAINTENANCE
- Frequent Cleaning: To avoid any buildup or debris obstructing the flow of water, clean the pump on a frequent basis.
- Examine the filter: To ensure efficiency, periodically check the fine mesh filter and clean or replace it as needed.
- Keep an eye on the water levels to make sure the pump is always completely immersed.
- Avoid Running Dry: Never run the pump without any water in it since this can shorten its lifespan and harm the motor.
- Examine Suction Cups: Make sure the suction cups are holding the pump firmly and periodically inspect them for wear.
- Examine the Impeller: Look for any indications of wear or damage on the stainless steel impeller shaft and replace it as necessary.
- Clean the Tubing: To avoid the accumulation of debris or algae that could impede the flow of water, clean the tubing on a regular basis.
- Look for Leaks: Especially following cleaning or maintenance, check the pump and connections for leaks.
- Make Sure There’s Adequate Insulation: To stop water or electricity from leaking, make sure the structure is sealed with resin and intact.
- Flow Rate Adjustment: To guarantee optimal operation, periodically modify the flow rate in accordance with your present requirements.
- Store Correctly: To avoid damage, keep the pump in a cold, dry place when not in use for a long time.
- Keep an eye on noise levels. If the pump starts to make more noise than usual, look for any obstructions or debris and clean as needed.
- Replace Worn Parts: To preserve the pump’s durability and efficiency, replace any worn or damaged parts as soon as possible.
- Prevent Chemical Exposure: Keep the pump away from strong substances that could corrode its parts.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Pump not starting | Power supply issue | Check the power connection and outlet |
| Low water flow | Clogged intake or filter | Clean the intake and filter |
| Pump making unusual noise | Air trapped inside the pump | Fully submerge the |
pump to release air
No water being pumped| Blocked tubing or nozzle| Inspect and clear any
blockages
Pump stops intermittently| Overheating due to prolonged use| Allow the pump to
cool down
Water leakage from the pump| Damaged seal or casing| Inspect and replace
faulty components
Excessive vibration| Loose installation| Secure the pump firmly
Fluctuating water flow| Voltage instability| Use a stable power supply
Pump overheating| Insufficient water level| Ensure the pump is fully submerged
Pump not lifting water effectively| Impeller clogging or damage| Clean or
replace the impeller
Short power cord| Placement too far from outlet| Use an appropriate extension
cord
Pump not suitable for saltwater| Corrosion from saltwater exposure| Use in
freshwater environments only
Pump not priming| Airlock in the system| Re-prime the pump
Pump running but no water output| Pump not fully submerged| Submerge the pump
completely
Low pressure output| Tubing too long or narrow| Use shorter or wider tubing
PROS & CONS
PROS:
- Durable stainless steel construction.
- High flow rate of 360 liters per hour.
- Compact design fits in tight spaces.
- Affordable pricing at $9.79.
- Low energy consumption with a 5-watt motor.
CONS:
- Limited to a maximum lifting height of 3.3 feet.
- Corded power source limits placement flexibility.
- Not ideal for large-scale applications.
- Requires regular maintenance to prevent clogging.
- The power cord may be short for some setups.
WARRANTY
The DaToo DT-090 Submersible Water Pump comes with a 1-year limited warranty. This warranty covers any defects in materials or workmanship under normal use. If the pump fails due to a manufacturing defect within the warranty period, DaToo offers repair or replacement services. The warranty reflects DaToo’s commitment to quality, ensuring that you can rely on their product for your water circulation needs with peace of mind.
FREQUENTLY ASKED QUESTIONS
What is the power source for the DaToo DT-090 Submersible Water Pump?
The power source is AC (alternating current).
How much does the DaToo DT-090 Submersible Water Pump weigh?
The pump weighs 7.4 ounces.
What is the maximum flow rate of the DaToo DT-090 Submersible Water Pump?
The maximum flow rate is 360 liters per hour, or 95 gallons per hour (GPH).
What is the maximum lifting height of the DaToo DT-090 Submersible Water Pump?
The maximum lifting height is 3.3 feet (0.9 meters).
What voltage does the DaToo DT-090 Submersible Water Pump operate on?
The pump operates on 110V~120V/60Hz.
What is the power rating of the DaToo DT-090 Submersible Water Pump?
The power rating is 5 watts.
What are the dimensions of the DaToo DT-090 Submersible Water Pump?
The pump dimensions are 1.8 inches in length, 1.7 inches in width, and 1.2 inches in height.
How long is the power cord of the DaToo DT-090 Submersible Water Pump?
The power cord is 5.9 feet (1.8 meters) long.
What is the price of the DaToo DT-090 Submersible Water Pump?
The price is $9.79.
What kind of warranty does the DaToo DT-090 Submersible Water Pump offer?
The pump comes with a one-year warranty.
What applications is the DaToo DT-090 Submersible Water Pump suitable for?
The pump is suitable for small water features, aquariums, fountains, and hydroponic systems.
Why is the water flow in my DaToo DT-090 Submersible Water Pump weak or inconsistent?
Ensure that the pump is fully submerged and check for any blockages in the intake or discharge areas. Clean the pump to remove any debris that might be restricting the water flow.
What should I do if my DaToo DT-090 Submersible Water Pump is making loud or unusual noises?
Loud noises may indicate that the pump is running dry or that there is debris inside. Make sure the pump is fully submerged and clean it to remove any obstructions.
How can I fix the issue if my DaToo DT-090 Submersible Water Pump is not turning on?
Verify that the pump is properly plugged into a working power outlet and inspect the power cord for any damage. If the problem persists, try using a different outlet or check the fuse.
Why is my DaToo DT-090 Submersible Water Pump overheating during operation?
Overheating can occur if the pump is not fully submerged or if the water intake is blocked. Ensure the pump is properly submerged and clean any debris from the intake.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>