TRAXXAS HKC23109-R00-10290 Complete LED Light Kit

Specifications:

• Product: High-Voltage Power Amplifier
• Manufacturer: Traxxas separately)
• Default Setting: Low Beam Mode

Product Usage Instructions:

High-Voltage Power Amplifier Installation:

1. Use needle nose pliers to remove the accessory port cover from the ESC.
2. Install the high-voltage power amplifier on the truck chassis with the connection ports labeled A, B, C, D facing towards the speed control. Secure with the included screws.
3. Plug the 8-pin connector from the high-voltage power amplifier into the accessory port on the ESC, ensuring proper orientation.The amplifier and lights will turn on when the ESC is poweredon.

Front and Rear Bumpers/LED Light Bar Installation:

1. Remove the existing front and rear bumpers.
2. Install wire mounts on the chassis as instructed.
3. Install the new front bumper with LED light bar using the provided screws.
4. Plug the connector into the high-voltage power amplifier port A.
5. Install the new rear bumper with LED light bar and plug in the connectors to the high-voltage power amplifier ports.
6. Secure all wiring to the chassis using zip ties.

FAQ:

Q: How can I change the settings of the high-voltage power amplifier?
A: You can change the settings and access additional functions using the Traxxas Link App available in the Apple App Store or Google Play.

Kit Contents

• High-Voltage Power Amplifier
• Wire mounts (2)
• 3x6mm button-head screws (2)
• 3x12mm button-head screws (2)
• Front bumper with LED light bar
• Rear bumper with LED light bar
• Zip ties (9)

Tools needed

• 1.5mm hex wrench
•  2.0mm hex wrench
• 2.5mm hex wrench
• Needle nose pliers

Compatible with the following Traxxas electronic speed controls (sold separately):

• Velineon® VXL-4s (part #3465)
• Velineon® VXL-6s (part #3485)
• Velineon® VXL-8s (part #3496)

High-Voltage Power Amplifier Installation

1.  Use needle nose pliers to remove the accessory port cover from the ESC (Fig. 1).
2. Install the high-voltage power amplifier [A] on the truck chassis. Ensure that the connection ports labeled “A, B, C, D” on the amplifier face towards the speed control. Secure with the included 3x12mm button-head screws (2). (Fig. 2)
3. Plug the 8-pin connector from the high-voltage power amplifier into the accessory port on the ESC; note orientation of the connector (Fig. 3).The amplifier and lights will turn on when the ESC is powered on.

Front and Rear Bumpers/LED Light Bar Installation

1.  Remove the existing front bumper [B] from the bumper mount by removing the 4x12mm button-head cap screws (4) and 4x15mm button-head cap screws (2). Retain and reuse the screws. (Fig. 4)
2. Remove the existing rear bumper [C] from the bumper mount by removing the 4x12mm button-head cap screws (4). Retain and reuse the screws. (Fig. 4)
3. Install the two included wire mounts [D] on the chassis using the included 3x6mm button-head cap screws (2) in the locations shown in Fig. 5.
4. . Install the new front bumper with LED light bar [E] using the 4x12mm button-head cap screws (4) and 4x15mm button-head cap screws (2) removed in step 1. (Fig. 5)
5. .Plug the connector into the high-voltage power amplifier port A (white) (Fig.6).
6. Install the new rear bumper with LED light bar [F] using the 4x12mm button-head cap screws (4) removed in step 2. (Fig. 5)
7.  Plug the connectors (red and blue) into the high-voltage power amplifier ports (red connector to C, blue connector to D) (Fig. 6).
8.  Use the supplied zip ties to secure all wiring to the chassis (Fig. 7).

High-Voltage Power Amplifier Operation Default Setting: Low Beam Mode

Change the high-voltage power amplifier settings and gain access to additional functions using the Traxxas Link App (available in the Apple App StoreSMor on Google Play™). The TQi transmitter with the Traxxas Link Wireless Module (part

6511, sold separately) are required.

Mode Select Button
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept all interference received, including interference that may cause undesired operation.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

High-Voltage Power Amplifier Mode Selection

Use the Mode Select button on the high-voltage power amplifier to toggle through the different lighting modes (from Low Beam Mode to High Beam Mode to Daytime Mode).

Connector| Channel| Default Connection| Low Beam Mode| High Beam Mode| Daytime Mode
---|---|---|---|---|---
A| 1| Front Low Beam Headlights| On| Off| Off
| 2| Front High Beam Headlights| Off| On| Off
B| 3| Not used| N/A| N/A| N/A
| 4| Not used| N/A| N/A| N/A
C| 5| Tail Lights| On| On| Off
| 6| Brake Lights| On when braking| On when braking| On when braking
D| 7| Reverse Lights| On when reversing| On when reversing| On when reversing
| 8| Not used| N/A| N/A| N/A

Warranty Information

Traxxas electronic components are warranted to be free from defects in materials and workmanship for a period of 30 days from the date of purchase. Limitations: Any and all warranty coverage does not cover replacement of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or transportation of a defective component to us.

Traxxas Lifetime Electronics Limited Warranty

After the expiration date of the warranty period, Traxxas will repair electronic components for a flat rate. Please visit Traxxas.com/support for a current schedule of warranty costs and fees. The covered repairs are limited to non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged by intentional abuse, misuse, or neglect may be subject to additional charges. Traxxas liability, in no case, shall be greater than the actual purchase price of this product. For replacement, product must be returned in brand new condition, with packaging and itemized sales receipt.

References

• Support Manuals | Traxxas
• Support | Traxxas

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>