HERTZ H100 Marine Digital Media Receiver User Guide

: August 13, 2024
: HERTZ

Table of Contents

HERTZ H100 Marine Digital Media Receiver
Product Specifications
FAQ
Packaging Contents
Dimensions
Connection Examples
Mounting
BASIC OPERATION
INSTALLATION
CONTACTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HERTZ H100 Marine Digital Media Receiver

Product Specifications

Product Name: CAPRI HD1
Installation Screws: x4 3.2 x 38 mm
Accessory Cables:
- CAPRI HMA C1310 (optional) – 10 mt / 393.7 in.
- CAPRI HMA C13Y (optional) – 30 cm / 11.8 in.

FAQ

Q: Where can I find the complete user manual?
- A: The complete user manual is available on our website at www.hertz-audio.com.

Packaging Contents

ACCESSORY CABLES

Dimensions

SIZE

| A| A 1| B| B 1| C| D| E Ø| F|
---|---|---|---|---|---|---|---|---|---
CAPRI HD1| 178.5| 163| 101| 84| 18| 31.30| 59,89| 8| mm
7.02| 6.42| 3.57| 3.31| 0.71| 1.23| 2.36| 0.31| in.

MOUNTING

Mounting Hole diameter mm (in.)	Ø 60 (2.95)
Mounting Method	Screws

Connection Examples

Example 1: one remote control connection

Example 2: three remote controls connection

Mounting

BASIC OPERATION

WARNING: when the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may cause hearing damage.
Make sure you adjust the volume in advance.

Power On/Off

Note:

Start the engine before using this unit.
Be careful about using this unit for a long time without running the engine.
If you drain the vessel battery, you may not be able to start the engine and this can reduce the service life of the battery.

Start the engine.
- Engine ON position
Press to turn the unit ON.

INSTALLATION

BEFORE STARTING

This device is exclusively for use in vessels with a negative ground 12 V power supply.
Read these instructions carefully.
Make sure the battery “-” terminal is disconnected before starting.
- This is to prevent short circuits during installation. (Figure 1)

INSTALLATION CAUTIONS

In order to avoid any interference, do not install the unit in the proximity of the engine compartment.
The use of unauthorized parts can cause permanent damage to the unit.
Always check your wire connections to ensure proper installation before turning the unit on.
Consult with your nearest dealer for proper installation or if other accessories are needed to complete the installation.
Seek assistance if modifications or drilling holes to your vessel is needed.
Do not install the unit where it will be subjected to excessive moisture, dust, dirt, foreign particles or vibration. Areas of high temperature from the engine, direct sunlight, or heat sources should also be avoided.
Do not install the unit in a location where it will interfere with the vessel operation, or it will injure the passengers if there is a sudden or emergency stop.

Information on electrical and electronic equipment waste (for those European countries which organize the separate collection of waste)

Products which are marked with a wheeled bin with an X through it can not be disposed of together with ordinary domestic waste. These electrical and electronic products must be recycled in proper facilities, capable of managing the disposal of these products and components. In order to know where and how to deliver these products to the nearest recycling/disposal site please contact your local municipal office. Recycling and disposing of waste in a proper way contributes to the protection of the environment and to prevent harmful effects on health.