Perkin Elmer T2 Toxin Fast User Guide
- August 12, 2024
- Perkin Elmer
Table of Contents
Perkin Elmer T2 Toxin Fast
Product Specifications
- Product Name: Toxin Fast T2
- Quantitative Kit for Corn Flour and Corn
- Model: MZLFQTT2
- Target: Soft Wheat
- Detection: T2 and HT2 toxins
- Quantification Range for Corn Flour and Corn: 40-300 ppb
- Quantification Range for Soft Wheat: 10-260 ppb
Product Usage Instructions
Sample Preparation
- Collect and grind a representative sample. Ideal particle size: 0.8 mm (20 mesh).
Sample Extraction
- Filter the sample. Ensure the mixture pH is > 6.5.
Reading Results
- Insert the strip and wait for a 5-minute reaction time.
- Before reading the result, scan the QR code corresponding to the matrix under examination included in the kit (white sheet).
- Remove the absorbent pad with scissors. Read the strip using the portable reader MZREAD-F.
FAQ
Frequently Asked Questions
- What should I do if the pH of the sample mixture is below 6.5?
- If the pH is below 6.5, adjust it using the provided pH corrector Cat# ACC005 before proceeding with the test.
- How long does it take to complete the test?
- The test typically takes around 15 minutes to complete, including sample preparation, extraction, and reading of results.
- Can I reuse any of the components in the kit?
- No, for accurate results and to avoid contamination, it is recommended to use the components provided in the kit for each test.
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>