Loluka OWS31 Open Ear Bluetooth Headsets Instruction Manual

Loluka OWS31 Open Ear Bluetooth Headsets

Product Information

Specifications:

• Product: Open Ear Bluetooth Headsets
• Colors Available: Blue, Green, Red
• Bluetooth Connectivity: Yes
• Open Ear Design: Allows ambient sound to be heard while using the headset

Product Usage Instructions

Pairing the Headset with a Device:

1. Turn on the Bluetooth headset by pressing and holding the power button.
2. Enable Bluetooth on your device and search for available devices.
3. Select the Open Ear Bluetooth Headset from the list of available devices to pair.
4. Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing.

Adjusting the Fit:
Ensure the headset fits comfortably around your ears. Adjust the ear hooks and loop over your ears for a secure fit.

Listening to Music or Making Calls:
Once paired, you can play music or make calls using the headset’s controls. Press the designated buttons to play/pause music or answer/end calls.

Charging the Headset:
Connect the provided charging cable to the headset’s charging port and a power source to charge the device. The LED indicator will show the charging status.

Frequently Asked Questions (FAQ):

• Q: How do I reset the headset?
  A: To reset the headset, turn it off, then press and hold the power button for 10 seconds until you hear a beep and the LED flashes.

• Q: Can I use the headset while exercising?
  A: Yes, the Open Ear Bluetooth Headset is designed to stay secure during physical activities like running or workouts

Please read this manual carefully before use the device.

Product Usage Introduction

1. Do not attempt to disassemble or replace any part of the product except for those operations specifically indicated in the instruction manual.
2. Do not immerse the product in water or any other liquid, the product is not designed to be waterproof.
3. If any liquid accidentally enters the product, disconnect and remove the product immediately.
4. To avoid electric shock, make sure there is no water on your hands when installing or uninstalling the product.
5. Do not place this product near a heat source or expose it directly to an ignition source.
6. Do not place this product in an environment with strong electromagnetic force, otherwise, it may cause the product to malfunction. In the above cases, it is necessary to disconnect and remove this product.

Packing List

• Headset x 2
• Manual paper x 1
• Charging case x 1
• Charging line x 1

Headset Specifications

• Bluetooth Version: V5.4
• Transmission distance: 10-15 metres
• Battery capacity: 30 mAh
• Usage time: about 5 hours
• Charging time: about 1.5 hours
• Rated input: 5V~20mA

Charging case Specifications

• Battery capacity: 200 mAh
• Charging time: 1-1.5 hours
• Rated input: 5V~200mA
• Usage time: 15 hours

( All technical information depends on actual specifications)

Charging the case:

Use Type-C cable to connect the charging case to the 5V power adapter. This device does not support fast charging head.
(Warm tip: If the charging bay indicator light flashes green, charge the charging bay in time.)

Description of LED Indicators

Charging case led indicator

• The headset is not fully charged: the blue light is on continuously
• Headset fully charged: the indicator light is off
• Charging the charging case: green light flashes
• Charging case fully charged: green light is on
• Low battery level in the charging case: blue light flashes

Headset led indicator

• Power on: red and blue LEDs flash alternately
• Power off: red LED flashes three times
• Bluetooth pairing status: red and blue LEDs flash alternately
• Successful pairing with headset: LED off

Product Operating Instructions

Power on

• Option 1: Remove the headset from the charging case, the headset will turn on automatically.
• Option 2: When the headset is off, press and hold the touch area of the headset for 3 seconds, the headset will turn on.

Power off

• Option 1: Put the headset back into the charging case, the headset will switch off.
• Option 2: Long press the touch area of the headset for 5 seconds, the headset will switch off.

Pairings

• Step 1: Remove the headset from the charging case, the headset will automatically switch on and once switched on, it will automatically execute the command.
• Step 2: Open the Bluetooth list on your smart device, find the device model (shown in the package cover) and press the connect button (supports monaural sound).

Touch button control

• A: Music playback mode
  Left/right headset control
  Previous song: double-click the function key on the left headset (L)
  Next song: double-click the right headset function key (R)

• Volume +: triple press the function button on the right headset (R)
  Volume -: triple press the function button on the left headset (L)
  Pause/playback: press the function button on the headset once

• B: Handsfree phone mode
  Left/right headset control (incoming call)
  Answer: press any function key on the headset
  Reject: press and hold any headset key for 2 seconds
  Hang up: press any function key on the headset
  C: Activate voice assistant (smart devices support voice assistant)

• Left/Right Headset Operation
  Activation: Long press any headset function key for 1.5 seconds (except under call status)

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>