MOSS DISTRIBUTING CS2165A Cube World Muscular Game Hammer Crazy Guitar Instruction Manual

MOSS DISTRIBUTING CS2165A Cube World Muscular Game Hammer Crazy Guitar

Specification and Technical Parameter:

Voltage: AC.230V·+ 10% 50Hz or 110V+ 10% 60·Hz

1. Power: mm 450W, max 500W
2. Size: W1010 x D1200 x H2474(mm)
3. Weight: around I 0,0Kg
4. Environrnental conditions(indoor): Temperature:-I0°C-+40°C
   Air humidity: 90%
   Atmospheric pressure: 86Pa

Note : Subject to change without prior notice.

Packing List:

1. order to make the machine work normally please unpack and check the following parts have ‘been included:
2. Whole machine packaging: No need to separate. Whole machine is, packaged, and transported.(Height 25501n1n, which is suitable for flatbed truck)
3. The main body and light box are separated packaged (Height 2215mm, which is suitable for high container):

Accessory List

POWER CONNECTION

• The cable cannot be pinned down by heavy object, otherwise there will be a short circuit or even fire.
• When pull out the plug, it should catch the plug. Do not catch the cable and pull it out.
• Do not pull out directly the plug by wet hand.
• Do not pull or twist the cable line and do not p·ut the cable line near the high temperature object.
• Do not put the cable line in the place which easy to be touched.
• Make sure the voltage and fuse use correctly.

Placed, Fixation, Remove and Installation, Visitor Notice:

Location

a. Place of location.
b. Scope of Location:

Please put the machine as the following dimension.

c. Please do not put the machine in the following location:
Warning:

• The place where would make the machine have condensation or heavy humidity;
• The place close to high temperature objects;
• The place where is to smooth or unsteady;
• The place where shake seriously;
• The place where is heavy dusty.

Fixation

The machine must be put on a flat ground and adjust th·e height of the castor.

Remove

• Please make sure to cut off the power and the cable before the moving;
• Remove the upholder first, then move the house;
• Remove, turnover, transport at random would make the machine damage:
• Please make sure to remove and transport according to manufacturer’s requirement.

How To Play:

1. Insert enough coins then enter to the game.
2. Tum the cube to make the wheel in the screen roll up until it stops. The position of the wheel md1cated by the arrow is the fmal score of the game.
3. If turn to might sta·rt the random mini-game ”Cube Turn Tum Turn”’. Turn the cube to make it roll from top to bottom. While the cube rolls down, how many lottery ·ticket it touches you can get the cumulative scores.
4. If turn to , might start the random mini-game ”Cube Jump Jump Jump,”. Turn the cube to make dice. roll from top to bottom. The number of dice on face side is multiplied or added equal to the final scores you get.
5. If turn to , might start the random mini-game ” Cube Roll Roll Roll”. Turn the cube to make it roll forward. While the cube rolls forward, how many lottery ticket it touches, you can get the cumulative scores.
6. If turn to might start the random mini-game” Cube Double”. Turn the cube to make the wheel roll. After the wheel stops, the square pointed by the arrow is multiplied by 2 to get the final score.
7. Once collected 6 colored squares(yellow, purple, blue, green, white and red), will enter to the mini game: Cube Collection.
8. Turn the cube to make the wheel roll. After the wheel stops, the squares in the range are added to the final score.
9. If turn to  will enter to the BONUS game. Tum the cube three times. After three rotations, the number displayed on the cube represents the final score of the MEGA BONUS.

User Instruction

INSTALLATION AND TEST

1. Before installation, please check the quantity of parts and install them;
2. Put the machine on the flat ground and fix base;
3. After installation, supply power and check if the machine works normally. If have any problem please cut off the power and check it.

MAINTENANCE

1. Start the game and verify the correct operation before putting the game into everyday operations;
2. Use a good quality spray type furniture polish to keep the game looking good:
3. A new machine must to be check each part;
4. A new machine must to be check each part.

Maintenance instructions:

1. The power must to be disconnected during the game maintenance repairs. In order to avoid a short circuit please disconnect the power before repair the electric component.
2. If need to supply power, please operate according to instuction. Please use suitable spare parts when you change them. There will make main board and electronic component damage if use unsuitable spare parts.
3. Don’t detach assemble, modify machine at random, otherwise there will be a short circuit and mechanical failure even catch fire.
4. Don’t put bottle ves.s-el or chemical m.ateria. , otherwise there will be damage the machine or make people injure.
5. It’s unable to repair the machine randomly. It may cause short circuit or operation out of control and other failures.
6. Notice to player: While players touch the sen.sor, the game display ”DANGER”.

Game Parameter Settings

1. CD Open the fro t door press and ho d the ”service button” until to appear the parameter setting interface.
2. In the parameter setting interface, you can set up the parameter of game by pressing the ”service button”. Please must se ect ”save & exit’ after finishing game setting.

rolling after some time.
Cube Stop Interval| The time of cube stops rolling in the game. “+”means that delay stopping the cube, “-” means that stop the cube early. “O” means that when the wheel in game stops, the cube will be stopped at the same time.
---|---
Language| Set the game language
Arrow Position| Arrow Position
Idle Braking Interval| null
Idle Braking Duration|
null|
Payout| Enter to the payout menu
I/0 test| Test the I/O of machine
Exit| Save current settings and exit
|

total 18 ranges can be selected
BOUNS value| The value for BONUS

Installation of machine components:

Fixation for light box component:

Problems and Solutions

If cannot be ruled out the fault or fault occurs repeatedly, please contact us for technical support.

Check the input and output equipment:

1. Open the front door, long press the “service button, you can see the parameter setting interface on the screen.
2. In the parameter setting interface, select “IO test” by pressing the switch button to enter to the 1/0 test interface. You can judge some components of machine is normally operating or not.

System restore:
If the machine malfunction, unable to enter the game, you can use the following method to system restore to repair.

1. Need to prepare the tool.
2. Close the machine power, Then insert the “USB keyboard” and “USB flash disk system” Connection to the host, Figure 1;
3. Open the machine power, Then press the keyboard F12 key continuously, Until the Figure 3;
4. Use the keyboard to select with the word “Kingston Data Traveler” option, The first or the third option, Figure 4. Then press “Enter” key, Will enter the system restore process:
5. The system automatically into the reduction, Wait to finish, Figure 5;
6. System restore automatically entered into after the completion of’ Figure 6″. At this time pull out “USB flash disk system”, then shut down the machine power :
7. Turn on the machine power, the system will automatically load the game. If still can not load the game after booting, there will be the prompt box of “figure 7” appearing at this time, press the “enter” key.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>