Telbix Fonseca Wall Light Installation Guide
- August 11, 2024
- Telbix
Table of Contents
Telbix Fonseca Wall Light
ITEM NO. : FONSECA WB
Installation Instructions
Protection from Rain
Ensure the fixture is protected from rain as illustrated:
- Incorrect installation: Fixture exposed to rain.
- Correct installation: Fixture protected from rain.
Assembly Diagram
- Rotate and remove the outer cage (5).
- Rotate and remove the inner cylinder (4).
- Install the light bulb (3) into the socket.
- Reattach the inner cylinder (4) by rotating it back into place.
- Reattach the outer cage (5) by rotating it back into place.
- Secure the mounting bracket (6) to the wall using screws (7).
- Connect the electrical wires to the terminal block (8) as follows:
- L (Live wire)
- N (Neutral wire)
- Attach the fixture base (9) to the mounting bracket (6) and secure it with screws.
Specifications
| Voltage | 240V ~ 50Hz |
|---|---|
| Bulb Type | E27 Max. 25W x1 |
| Note | Globe not included |
Important Information
Must be installed by a qualified electrical contractor. Install in
accordance with AS/NZS3000.
FAQ
-
Q: What type of bulb should I use?
A: Use an E27 bulb with a maximum wattage of 25W. -
Q: Is the bulb included with the fixture?
A: No, the bulb is not included. -
Q: Can I install this fixture myself?
A: No, it must be installed by a qualified electrical contractor. -
Q: What standards should the installation comply with?
A: The installation should comply with AS/NZS3000 standards.
ITEM NO.:FONSECA WB
SAFETY
INSTALLATION
240V～50Hz E27 Max.25W x1
- NOTE : GLOBE NOT INCLUDED
- IMPORTANT
- Must be installed by a qualified electrical contractor.
- Install in accordance with AS/NZS3000
Read User Manual Online (PDF format)
Loading......