FIRESIDE OUTDOOR Pop-Up Fire Pit Portable and Lightweight Instruction Manual
- June 5, 2024
- FIRESIDE OUTDOOR
Table of Contents
FIRESIDE OUTDOOR Pop-Up Fire Pit Portable and Lightweight Instruction
Manual
LIVE LIFE FIRESIDE
There’s just something about sitting around a campfire. People unplug and just
appreciate the family and friends around them enjoying great conversations
while enjoying tasty meals cooked over the open flame.
The campfire is a source of light, warmth, and community. Gazing into the
flames, we reconnect with our past and it reminds us of simpler times.
The campfire remains at the heart of any outdoor adventure, yet it has been overlooked as technology as advanced. Every year we see new tents, better sleeping bags, more comfortable chairs, and colder coolers. Everything around the campfire has been innovated with the latest technology, but the campfire remains the same, a hole in the ground that holds destructive capabilities.
Fireside Outdoor was created with a simple purpose in mind: Engineer products that make managing an outdoor fire easier and safer. With the help of innovative materials and a team of skillful engineers, we are creating common sense solutions to long lasting problems.
This manual will help you get the most out of your Fireside Outdoor products, please keep it safe & refer to it for assistance and tips.
ASSEMBLING YOUR POP-UP PIT
Open your Pop-Up Pit frame to its fully seated position.
Your Pop-Up Pit frame may fell ‘stiff’ upon first use, this will subside after your first fire.
Pay close attention to which Ember Guard has the badge, this should be set
aside until Step 3. Two Ember Guards should be placed on the frame parallel
from one another. Guide the upright pole of the frame through
Your Pop-Up Pit will come wrapped with straps, keep these as they will aid in storage and packing in the future!
Repeat Step 2 with the remaining two Ember Guards. Note that the Ember Guard
with the logo badge should be put on in this step.
If you are having trouble applying the Ember Guards or Fire Mesh, WD-40 can be used on the upright poles for lubrication.
Holding the Fire Mesh with the folded edges facing down, each of the four
grommets should be placed over the upright poles of the frame. Take care to
not let any one corner drop too far down the uprights.
Once the uprights are through the grommets, slide the Fire Mesh down as one unit until the Fire Mesh is fully seated on top of the Ember Guards.
DISASSEMBLY AND PACKAGING
WARNING:
Ensure your fire is completely extinguished before handling or touching the
Pop-Up Fire Pit!
Remove the ashes from your pit. This can be done by either dumping the pit,
using a shovel, or by removing the Fire Mesh.
To remove the Fire Mesh look for the two bottom Ember Guards from Step 2 of
the assembly. Simply place your hands in the middle of each Ember Guard and
pull straight up keeping the Ember Guards parallel to the ground. This should
remove all four Ember Guards as well as the Fire Mesh as one unit. The Fire
Mesh can then be funneled, and the ash dumped out from it.
Close the frame of the Pop-Up Pit and use the Ember Guards to form a box
around the frame.
Place the Fire Mesh with the folded side up on the ground. Place the frame and
Ember Guard construction on top of the Fire Mesh and roll together tightly.
Repeat for Heat Shield if applicable.
Using the included straps, strap the top and bottom of the packed Pop-Up Pit
to ensure the Fire Mesh does not uncoil. Place the Pop-Up Pit back inside its
carrying bag, with the four poles from the frame towards the opening of the
bag.
HEAT SHIELD SET UP
Unroll your heat shield
Place the heat shield reflective/shiny side up.
Wrap the high temperature velcro straps twice around the set screw 3
1/2-inches down from the Ember Guards in the frame poles.
Push down the center of the heat shield and roll the edges to form a bowl
shape.
GRILL GRATE SETUP
Slide risers onto both sides of the rails.
Tighten risers onto the rail, do not over tighten.
Slide rails and risers onto the mounting points in each corner of our Pop-Up
Fire Pit.
Unfold and place grill grates on top of the rails.
Slide risers onto both sides of the rails.
Tighten risers onto rail, do not over tighten.
Slide rails and risers onto the mounting points in each corner of your Pop-Up
Pit.
Unfold and place grill grates on top of rails.
ENHANCE YOUR FIRESIDE EXPERIENCE
TRAILBLAZER FIRE PIT & GRILL
The Trailblazer Fire Pit & Grill is a mini-version of the full-size PopUp Pit.
With a 12”x12” burn area, collapsible frame, & weighs 3-lbs making it the
perfect companion for your next outdoor adventure.
GROUND EMBER MAT
Use your Fireside Outdoor Ember Mat to keep popping embers and hot coals from
damaging or polluting the ground around your fire pit, charcoal grill, or bbq.
THERMAL PROTECTION GLOVES
These EN407 gloves are the perfect protection for your hands from flames &
heat up to 932°F making them the perfect companion around your fire pit,
BBQ/Grill, or kitchen.
**TRI-FOLD GRILLING KIT***
The Tri-Fold Grilling Kit converts your Pop-Up pit into a grill station.
The stainless steel grates offer 350sq/in of cooking & fold way when not in
use.
*Sold Separately
**QUAD-FOLD GRILLING KIT***
The Quad-Fold Grilling Kit converts your Pop-Up pit into a grill station.
The stainless steel grates offer 500sq/in of cooking & fold way when not in
use. *Sold Separately
CAMPFIRE DEFENDER
Take control over our campfire!
Cover your fire at the end of the night and safely keep your coals burning for
8-hours and wake up to hot coals in the morning!
RENEW & REFRESH
Get fresh new pieces and parts for your Pop-Up Fire Pit. Available parts
include the Fire Mesh, Heat Shield, Ember Guards, and the brand new zippered
Pop-Up Pit carrying bag.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>