GEEZER M2 Wireless Silent Mouse User Manual

: August 10, 2024
: GEEZER

Table of Contents

GEEZER M2 Wireless Silent Mouse
Product Information
Product Usage Instructions
Frequently Asked Questions
Product installation
OVERVIEW
Specifications
Factory Settings
Standard configuration
FCC
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GEEZER M2 Wireless Silent Mouse

Product Information

Specifications

Model: XJSFMFTTTJMFOUNPVTF
Frequency Range: 2408MHz-2474MHz
Channels: 34

Product Usage Instructions

Setup

Before using the product, ensure it is properly connected to the power source and any necessary devices according to the user manual.

Power On

Press the power button to turn on the device. Wait for the indicator lights to show that the device is ready for use.

Frequency Selection

Use the control panel to select the desired frequency within the range of 2408MHz-2474MHz. Ensure that the selected channel does not interfere with other devices in the vicinity.

Channel Adjustment

You can switch between the available 34 channels using the provided controls. Select a channel that provides the best signal quality for your needs.

Frequently Asked Questions

Q: How do I reset the device?

A: To reset the device, locate the reset button on the product and press it for X seconds until the device restarts.

Q: Can I use this product outdoors?

A: This product is designed for indoor use only. Using it outdoors may affect its performance and durability.

Product installation

Take out the USB receiver at the bottom of the mouse, insert it into the USB port of the computer, open the battery cover at the bottom of the mouse, and put an AA(No.5) battery into the battery bin (note that the positive and negative polarity of the battery must be correct). After powering on, the code can be used automatically.

OVERVIEW

left button
right button
Wheel button
DPI
battery warehouse
receive

Specifications

Note: There is a protective film on the footpad, please tear it off before use
Wireless mouse frequency: 2408MHz-2474MMHz;
Wireless mouse channels: 34 (automatic frequency hopping)
Wireless working distance: ≤10 meters (depending on the surrounding wireless environment at work,
If there are many wireless interference sources around, the wireless operation distance may be shortened.)
Wireless rated voltage: 1.5V
Wireless rated current: ≤15 mA
Mouse sensing system: optical
Mouse resolution: 800/1200/1600 three levels adjustable (default 1200DP1)

Matters needing attention

Don’t put the optical mouse in the mirror, glass surtace or uneven surface is used, this will seriously affect the working effect of the mouse, the use of such wireless devices, please stay away from strong interference sources, such as household microwave ovens, etc., such as mouse found dirt, can use a small amount of anhydrous alcohol is wiped, must not put in liquid cleaning as a whole.

Factory Settings

Restoring factory Settings (code matching)

When you use the mouse, the cursor does not move or the mouse does not work, please follow the following steps to restore the mouse to factory Settings

If the product has been used for some time, the battery may be low. Replace the battery.
Pull out the receiver, and insert it into the USB port.

Standard configuration

If the package is inconsistent with the content, please contact the dealer for a replacement
Wireless mouse X1
Receiver X1
Battery (No.5) X1
User manual X1

FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.