Geezer 19 Inch and 21 Inch Enforcer Style Front Wheel Kit Installation Guide
- June 9, 2024
- GEEZER
Table of Contents
19 Inch and 21 Inch Enforcer Style Front Wheel Kit
Installation Guide
Instructions for
Geezer Engineering forged wheels
19 Inch and 21 Inch Enforcer Style Front Wheel Kit
Warning: The installation of this product requires the skills of qualified motorcycle technicians and should be performed by qualified, professional workshops only.
The product box contains:
- Assembled 3-piece forged wheel with dual 14” floating brake rotors and titanium bolts
- internal wheel spacer
- 1 wheel bearing, right side; ABS bearing not included)
- Right and left side caliper stand-off mount
- Stainless steel mounting hardware
Installation of wheel bearings and internal spacer
- Install the left bearing first. The bolt heads in the wheel hub indicate left side of the wheel.
- Insert the internal wheel spacer.
- Install right side bearing.
If your bike is equipped with ABS the ABS sensor doubles as left spacer.
Please slide the included O-ring over the ABS sensor.
Then slide the cone cover over it. 
Install tire and proceed with installing your wheel according to the OEM service manual for your year and model bike.
Disclaimer
Geezer Engineering products , part numbers, product packaging and
corresponding printed matter are not intended to imply that any of these parts
are Harley-Davidson® original equipment or endorsed by Harley Davidson® Inc.
The words, Enforcer, Rushmore, Buddy Seat, Disc Glide, Dyna Glide®, Electra
Glide®, Evolution®, Fat Boy®, HD®, H-D®, Harley®, Harley-Davidson® Heritage®
Softail®, Heritage® Springer®, Hugger®, Low Rider, Night Train®, Road Glide®,
Road King®, Roadster®, Softail®, Softail® Deuce™, Sport Glide®, Sportster®,
Springer®, Sturgis®, Super Glide®, Tour-Pak, Tour Glide®, Ultra Classic™ and
Wide Glide® are registered trademarks of Harley-Davidson®, Inc., Milwaukee,
Wisconsin, U.S.A. The words, Bad Boy®, Convertible, Duo Glide®, Hydra Glide®,
V-Fire III and VROD™ are trademarks of Harley-Davidson®, Inc., Milwaukee,
Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used on
this website for reference only: EL, FL, FLH, FLHR, FLHRCI, FLHS, FLHT, FLHTC,
FLHTC Ultra Classic, FLHTC-I, FLHTCUI, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS,
FLSTSC/I, FLT, FLTC, FLTC Ultra Classic, FLTCU, FLTR, FLTRI, FLTRSEI, FX, FXB,
FXD, FXDB, FXDC, FXDG, FXDL, FXDS-CON, FXDWG, FXDX, FXDXT, FXE, FXEF, FXLR,
FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRS-CON, FXRSE, FXRS-SP, FXRT, FXS, FXSB,
FXST, FXSTB, FXSTC, FXSTD, FXSTD-I, FXSTS, FXSTSB, FXWG, GE, K, KH, VROD™,
VRSCA, VRSCB, WL, WLA, XL, XL1100, XL1200, XL1200C, XL1200R, XL1200S, XL883,
XL883C, XL883R, XLCH, XLCR, XLH, XLH1100, XLH1200, XLH1200, XLH1200S, XLH883,
XLR, XLS, XLS, XLT, XLX, XLX, XR1000 and their connection to Harley-Davidson®
factory part numbers, as well as any printed matter, are not intended to imply
that any of these parts are Harley-Davidson® original equipment. Although the
quality of most of the items listed here equals or exceeds OEM specifications,
none of these items are manufactured by Harley-Davidson® Motor Company.
All parts listed on the GeezerEngineering.com website are either designed by
Geezer Engineering or from independent aftermarket sources. All Geezer
Engineering products are aftermarket products and are not necessarily endorsed
or recommended by any other manufacturer. None of Geezer Engineering branded
parts illustrated were manufactured by the original equipment manufacturer of
the motorcycles they are intended for or under their supervision or control.
All other brand names or trademarks or registered trademarks used in any
Geezer Engineering publication are the property of their respective holders
and are used for reference purposes only. Geezer Engineering is in no way,
shape or form associated with Harley-Davidson® Motor Company – neither stated
nor implied. Any products with a trademark, name, word, O.E.M. number used on
our web site, digital documents, printed media and videos by Geezer
Engineering is strictly intended to be used solely as a reference only to
usage to that particular part. All Geezer Engineering parts are designed to
comply with or exceed D.O.T. standards. None of the parts and accessories are
D.O.T. approved unless noted otherwise. We have total confidence in our
product quality. We strongly suggest test fitting all parts prior to any
modifications or painting.
https://GeezerEngineering.com/pages/instructions
Copyright © 2020 by Geezer Engineering LLC – All Rights Reserved
Publication, duplication, or distribution prohibited without the written
consent of Geezer Engineering LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>