Haomuren V3 Plus Wireless Lavalier Microphone User Manual

Haomuren V3 Plus Wireless Lavalier Microphone User Manual

Product Introduction

Thank you for choosing Homerun’s wireless microphone.
This product is an intelligent wireless lavalier microphone that can provide professional level recording and live streaming output. Plug and play without the need for an app. Multiple uses: can be used in online live streaming, video VLOG shooting, program interviews, interview recording, video teaching, and other occasions

Transmitter

Receiver

Function Introduction

**Introduction to the functions of the charging compartment

**

1. Charging interface: Connect Type-c charging cable for charging
2. Important Note: This product does not support fast charging. Please utilize a 5V 1A Power adapter for charging. Exceeding the rated power may result in malfunctions, (Power adapter is not included with the product.)

Function Introduction

1. Introduction to transmitter functions

Power Key

DB key:

(When the volume is cycled to the third gear and pressed again, the volume is in the first gear, and when turned on, it defaults to the second gear.)

Bluetooth indicator light: The blue light flashes when Bluetooth is turned on but not connected, the blue light remains on when Bluetooth is tured on and connected and the biue light tums off when Bluetooth is not turned on

VLOG indicator light:

1. When using the VI LOG mode, the blue light is always on.and the blue light flashes when the microphone is muted.
2. When not connected to the receiver, the green light flashes, and when connected to the receiver, the blue light is always on

Live indicator light:

1. When using live streaming mode, the blue light is always on, and the blue light flashes when the microphone is silent.
2. In VLOG ode, the original sound green light is always on when turned on
3. In live streaming mode, turn on the original sound and the ice blue color will always light up

Charging indicator light: The red light is always on
when charging, but goes out when charging or fully charged
Headphone interface: Connect 3.5m headphones for listening back Reset key: Use the phone card pin to enter pairing mode(do not operate when the device is not disconnected)
Reset key: Use the phone card pin to enter pairing mode(do not operate when the device is not disconnected)
Charging interface: Connect the charging cable for charging
Radio microphone: Receiving part, close to the sound source to receive sound
Electrocution from charging: The contact where the transmitter is put into the charging compartment for charging.

Warm tips.

1. When the transmitter and receiver are not connected, the transmitter or receiver will automatically shut down after 5 minutes to save power.

Function Introduction

Receiver Function Introduction

Reset Key| Pairing pattern| Blue light slow flash| Blue light is always on
---|---|---|---
Microphone 1| Poke it Once| Not Connected| Connected successfully
Microphone 2| Poke it Once| Not Connected| Connected successfully

1. Power button: Press and hold for 3 seconds to turn on/off
2. Reset key
3. Charging port: Connect Type-C charging head forecharging
4. Charging indicator light: The red light is always on during charging, and the red light is off when not charging or fully charged
5. Status indicator light: When not connected to the transmitter, the indicator light goes out, and the blue light remains on when connected to the transmitter.
6. Camera connection interface: connected to the camera through a camera cable for use
7. Audio output: Connect OTG converter/adapter to your phone for recording/live streaming, etc
8. Electrocution from charging: The contact where the receiver is put into the charging compartment for charging.

Usage Method

How to connect your phone to record/record videos

Step 1: Long press the power button of the receiver and transmitter to turn on the device, and the pairing is successful
Step 2: Connect the receiver to the phone using a converter
Step 3: Double click on the de button of the transmitter to switch to VLOG mode (VLOG mode is already default when first turned on).open the recording/camera and other apps on the phone to record/record videos

Note: Please connect the long end of the converter to the phone and the short end of the converter 1o the receiver OUT socket.
Tip: If the original camera of your phone is not compatible with an external microphone, other camera apps can be used.

How to connect to mobile live streaming
Step 1: Long press the power button of the receiver and transmitter to tum on the device, and the pairing is successful
Step 2: Connect the receiver to the phone using a converter
Step 3: Double click the dB button on the transmitter to switch to live streaming mode, and use the Bluetooth connection of another phone as the live streaming accompaniment. Open the live streaming app on your phone to start the live streaming note: Please connect the lang end of the converter to the phone and the short end of the converter to the receiver OUT socket

Note: Please connect the long end of the converter to the phoneand the short end of the converter to the receiver OUT socket

How to connect a camera for recording/recording videos
Step 1: Long press the power button of the receiver and transmitter to power on, and the pairing is successful.
Step 2: Connect the receiver to the camera using the camera cable
Step 3: Double click on the dB button of the transmitter to switch to VLOG mode (VLOG mode is already default when first turned on)open the camera to record/record videos.

Microphone receiver

Microphone transmitter

Pairing instructions

Note: Before the product leaves the factory, it has been fully paired and can be used when it is turned on. When the device cannot be automatically connected and used when it is turned on, you can follow the following steps for operation verification and pairing:

Check first: when the receiver and transmitter are restarted

1. The single microphone is in an unpaired state (judgment criteria: the receiver status indicator light is always on, one indicator light of Microphone 1 or Microphone 2 flashes, and
   the VLOG indicator light of the unpaired transmitter flashes)

2. Both microphones are in an unpaired state (judgment criteria: the transmitter VLOG Indicator light flashes, the receiver status indicator light turns off and microphone 1/microphone 2 flash at the same time)

Pairing connection steps:

1. Use the reset button of the transmitter to push the pin of the mobile phone card to enter the pairing state (the VLOG indicator light flashes quickly, and the transmitter is in pairing mode). The reset button of the receiver, push the pin of the mobile phone card to enter the pairing state (Microphone 1 The indicator light flashes quickly, and the receiver is in pairing mode at this time), and it will be automatically paired in about 3 seconds (the transmitter VLOG indicator light is always on, the receiver status indicator light and the microphone 1 light are always on)
2. Take the unpaired transmitter and push it with the phone card pin to enter the pairing state (the VLOG indicator light flashes quickly, and the transmitter is in pairing mode). Use the receiver reset button and double-click it with the phone card pin to enter the pairing state (Microphone 2 indicator light flashes quickly, and the receiver is in pairing mode at this time), and it will be automatically paired in about 3 seconds (at this time, the two transmitter VLOG indicator lights are always on, and the receiver status indicator light/Microphone 1/Microphone 2 light is always on)
3. Manual activation of OTG:
   Type-C plug: When connecting the device to a Type-C interface on a mobile phone, plug it directly into the mobile phone’s charging port. (Note: Some Android phones may require manual activation of OTG functions for use, while most Android phones have OTG functions enabled by default

Troubleshooting

If the troubleshooting steps mentioned below haven’t solved your issue, please email us at info@zealsound.com for further assistance.
Why is it not working with my Android smartphone but functioning with my iPhone or iPad?
Functionality may be affected if OTG is disabled. Some devices have OTG turned off by default. Please confirm OTG support and enable it on your Android device before use or as needed.
How to enable OTG on your phone?

1. You need to confirm if your phone supports OTG functionality or if you need to access the permissions related to OTG devices.
2. Some Android phones automatically detect and enable OTG functionality without the need for additional settings.
   Other Android phones may require manual activation. To do this, go to your phone’s settings, search for the keyword “OTG,” and then toggle the option to enable it.
   Charging Reminder:
   Please use the one-to-one original Type-C charging cable provided with the product for charging. This product does not support fast charging.

Packaging List

Pairing instructions

Charging compartment parameters

Warranty

The product is accompanied by a 12-month warranty. However, this warranty will be void if the equipment is tampered with, misused, mishandled, improperly adjusted, or subjected to excessive wear. If you need additional help or have any questions, please feel free to contact our dedicated after-sales service team at service@urhaomuren.com We are dedicated to actively seeking a suitable solution to address any issues you may have.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>