SENCOR SEP 720 BT Over Ear Headphones User Manual

Table of Contents

USER’S MANUAL
Over-ear headphones with touch control

Supply content

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
Before first use, start charging the headphones to the maximum level.
Turning on the headphones – press and hold the power button in the default position and wait for the headphones to greet you.
Turning off the headphones – press and hold the power button in the default position and wait for the headphones to announce the shutdown.
Warning : To prevent damage to your hearing, always keep the volume level of your device to a minimum before connecting BT headphones to your mobile device.
Note: The BT headphones will turn off after a longer period of inactivity unless they are paired to another device.

To pair the BT headphones with your mobile device, do the following: Turn on the BT speaker and search for its Bluetooth name “SEP 720BT” on the device to which you wish to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT headphones are pairing, use the following code: “0000”.
To cancel the pairing process, disconnect the BT headphones from your mobile device (cancel the Bluetooth pairing).
Note : To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and your paired device is kept within 10 meters. Depending on ambient interference, in some cases it may be necessary to maintain a shorter distance between the BT headphones and the paired device.

The touch control area will is located on the right earpiece.
To increase volume, slowly drag you finger from the “-” lo the “+” position.
To decrease volume, slowly drag you finger from the “+” to the “-” position.
To go to next track, drag your finger from “right” to “left”.
To go to previous track, drag your finger from “left” to “right”. Warning: To ensure proper function, keep the headphones touch control area clean. Avoid avoid random contact with other body parts such as hair. This may trigger the described function unexpectedly. Move your finger slowly on the touch area.

Orange LEO – charging in process
White LED – the charging process has finished
Orange/ blinking white LED – the headphones are ready for pairing Solid white LEO – the headphones are paired to your device

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
Charging of the BT headphones will be indicated by an orange LED. The white LED indicates a fully charged battery in the process of charging.
Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10% – 20%). Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorised service centre for more information.
Recommendation : A low battery is first reported at 20% and then at 10%. We recommend that you start charging to full level at the first sign of a low battery.
Recommendation : If your headphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months.

Bluetooth Version 5.3
Maximum Transmitter Power 100mW@ 2.4GHz-2.4835GHz
Bluetooth Version: V5.3(JL 6956)
Support Profile: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\ gatt\rfcomm\sdp\12cap
Driver Diameter: 40 mm
lmpendance:32O
Sensitivity: 100dB±5 dB
Frequency Range: 2.402 GHz-2.480 GHz
Transmission Range: >10m
Battery Capacity: 500 mAh
Charging Time: About 4H
Playing Time: About 18H

Safety Notice:

Please observe the rules of the Country or Region which you are in while driving.
Do not disassemble or modify the headset at any reason, otherwise, It may damage or burn the headset.
If there is any quality problem, please send headset to authorized service center for repairing.
Please keep the equipment along with all the accessories out of the reach of children and pets.
Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life.
Please do not immerse the earphone into water. Guarantee will be lost if damage is caused by immersed into water.
It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music.

Instructions and information regarding the disposal of used packaging materials

Disposal of used electrical and electronic appliances

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste.
Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines. For business entities in the European Union If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal In other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST CR, a.s. declares that the radio equipment type SEP 720 BT is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu