S2G Wireless Doorbell Instruction Manual
- June 3, 2024
- S2G
Table of Contents
Wireless Doorbell
Instruction Manual
Wireless Doorbell – usage without batteries
Specification
- Wireless ,no cabling needed.
- Battery free for transmitter, through collect the push button power into electronic power
- Up 100 meter range, distance can be repeat through receivers to enlarge the distance
- 25pcs selectable musical tones
- 3grade volume levels
- Waterproof range IP44
- Self-learning code function.
Technical Parameter
- Rated voltage: AC 220V ,50-60HZ.
- Volume: 50-80dB
- Working frequency: 433MHz
- Power consumption of transmitter: <10mw
Installation:
- Tear up one side of the double-sided adhesive sticker and paste it to the underside of the Transmitter.
- Tear the other side of the double sided adhesive sticker
- Choose a good place and paste it up, then pressed a little to ensure the transmitter solidly
- Plug the doorbell into a regular socket within the operating range.
Self-learning code function operation:
Products already have been paired in Factory .If you need to replace the transmitter ,increase or decrease the doorbell quantity, please follow steps below:
-
Learn code pairing:
Pressing and hold „learning code button“ for about 5 seconds .Pressing the transmitter 2 times within 30 seconds. If the doorbell rings, the pairing is successful. If the doorbell does not ring, please press the transmitter again, until the pairing is successful. For matching multiple transmitters , please repeat the above operation. -
Delete pairing:
Pressing and hold the “learning code button “about 10 seconds until the bell rings two times. All pairing code will be deleted completely.
Current warranty information.
The warranty period is 24 months from the date of purchase. This includes a
6-month guarantee from the date of purchase.
The territorial scope of the warranty protection is Europe-wide.
The proof of purchase is valid as proof of this. The product has been
thoroughly checked for quality and functionality before dispatch.
The guarantee is excluded in the following cases:
- in the event of modifications to the system without our approval
- in the case of use other than that stated above
- in the event of damage caused by falling
When making a claim under the guarantee/warranty, please return the complete
product in transport-safe packaging to the point of sale from which the
product was purchased. Describe the detected defect in the product and enclose
the original proof of purchase with the shipment.
The seller reserves the right to remedy the defect before refunding the
purchase price.
Necessary transport costs will be reimbursed to the customer if a justified
claim under the statutory guarantee/warranty is established.
The use of the legal rights for defects is free of charge. These are not
restricted by the guarantee.
Mobiset GmbH hereby declares that this product complies with the essential
requirements of the applicable European directives.
Mobiset GmbH
Rösrather Straße 333
51107 Köln
Tel: +49 22 19 89 52 0
Fax: +49 22 19 89 52 39