SENCOR Glass Panel Convector Heater Instruction Manual

SENCOR Glass Panel Convector Heater

Specifications:

• Product: Glass Panel Convector Heater
• Power Supply: AC 230-240V, 50-60Hz
• Heating Modes: Comfort mode, ECO mode, Anti-frost mode, Pre-set programs
• Temperature Range: 5-35°C (Comfort mode), 1-31°C (ECO mode), Anti-frost at 7°C

Product Usage Instructions

Safety Advice:

This product is suitable for well-insulated spaces or occasional use. Ensure proper installation following the guidelines providedin the manual.

Installation:

• Make sure to maintain the recommended distance from walls and objects.
• Use the hanging rack as a guide for installation by marking hole positions, drilling holes, inserting wall plugs, and fastening the rack securely.
• Attach the heater body to the hanging rack ensuring it iscorrectly positioned and at least 30cm away from the floor andwalls.
• Check for any wiring or pipework before drilling holes. Ensure the radiator is properly attached to the wall before plugging in the unit.

How to Use:

• Plug the appliance into an AC 230-240V, 50-60Hz socket and press the on/off switch to power on with a beep sound.
• Use the control panel to adjust settings for heating status, comfort mode, ECO mode, and timer.
• Set clock and day of the week by following the instructions provided in the manual.
• Choose heating modes such as Comfort mode, ECO mode, or Anti-frost mode based on your preference.
• Utilize pre-set heating programs like P1, P2, P3 for automated heating schedules.

FAQ

• Q: Can this heater be used in poorly insulated spaces?
  • A: No, this product is only suitable for well-insulated spaces or occasional use as mentioned in the manual.
• Q: What should I do if the clock and calendar settings are reset?
  • A: If the clock and calendar settings are reset due to power loss, you will need to reconfigure them following the provided instructions.

Always read this instruction manual before installing or using your appliance and always keep for future reference

Safety Advice

READ THIS NOTICE CAREFULLY BEFORE OPERATING THE APPLIANCE.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
  CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

• WARNING: In order to avoid overheating, do not cover the heater.

• The heater must not be located immediately below a socket-outlet.

• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

• Always use your appliance with rollers or feet fixed

• Do not use this heater if it has been dropped;

• Do not use if there are visible signs of damage to the heater.

• Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.

• WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

• WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

• Fixed heaters are to be installed so that switches and other controls cannot be touched by a person in the bath or shower.

• Warning: this product shall be installed in the volume 2 only according the national wiring rules (For France NF C 15-100)

• Note: The drawing below is for reference only. We suggest that you contact a professional electrician for assistance

THIS PRODUCT IS FOR ROOM HEATING

Installation

Make sure that the distance from walls and objects is respected.

• A． Put the hanging rack on the wall as a guide ruler (please make sure the holes at parallel level), use a mark pen to mark the hole position
• B． Drill holes on the wall with ɸ 8mm drill bit and insert the plastic wall plug
• C． Fasten the hanging rack on the wall with the screws, do make sure the hanging rack is in correct direction
• D． Gently insert the heater body of the bottom to the hanging rack first and then push the heater body to be hooked on the whole hanging rack
• Warning: Be sure to keep the distance between the heater and floor, wall and so on at least 30cm.
• Warning! When drilling holes, always check to ensure there is no wiring, pipework, etc. in the area to be drilled.
• Warning: Before plugging in the unit make sure the radiator is properly attached to the wall. Otherwise problems can occur. Put the heater on a flat, dry and clean surface. Install the feet as shown on the below drawing.

How to use

Control panel

1. Standby: on/off
2. Heating status
3. Wifi
4. Comfort mode
5. ECO mode
6. Timer

How to use

• Plug the appliance into an AC 230-240V 50-60Hz socket, and press down on/off switch with a beep sound. The indicator light is on.
• Press to turn on the heater
• To stop the heater working, press to turn off the heater,
• Unplug the product when it’s not in use

Clock and day of week setting

• Press down secs to enter clock and day of week setting
• The screen display “d”, press and to select the day from 1-7.
  1. Monday
  2. Tuesday
  3. Wednesday
  4. Thursday
  5. Friday
  6. Saturday
  7. Sunday
• Press to confirm day setting and enter the clock hour setting, with the screen display:
• Press and to set the current hour
• Press to confirm hour setting and enter the minute setting, with the screen display:
• Press and to set the current minute
• Press to confirm all settings
  Note: The clock and calendar will be reset to factory default if without power supply.

Heating mode

• Press to enter mode selection. By pressing, heating mode runs in a continuous cycle as below:

• Comfort mode: Press and to set the temperature from 5-35oC.

• ECO mode: Press and to set the temperature from 1-31 oC.
  Note: ECO mode=Comfort mode – 4 oC

• Anti-frost mode: the screen display . The target temperature is 7 oC. The temperature can’t be adjusted.

• P1/P2/P3: Pre-set heating program.
  Note: If the clock and day setting are not finished, the first time to enter P1/P2/P3 program setting, it is requested to set day and clock setting in advance.

P3 adjustable program setting

1. When under P3 mode, press over 3 secs to enter day setting.
2. The screen displays , press  and to set from (Monday-Sunday). Press to confirm and enter hour setting
3. The screen displays , press and to set from 00-23). Press to choose heating mode for every hour (Comfort mode or ECO mode or no 2 lights for Anti-frost mode)
4. Repeat the operation until you have completed the schedule of every hour and every day.
   Note: After setting heating mode for hour 23, press to come back to day setting.
   Note: when the screen displays , press finish all settings with a display of

Timer off function

Press one time, the screen display “0H” and keep flashing. Press and to set timer from 0-24 hours. Press again to confirm the setting. Then the indicator light is on. The heater will turn off after set time has passed.

Open window function

• When the product is in status of stand-by, long press when the screen display or , press or to set the open window function on or off.
• When the heater is working, the temperature of the environment decreases 2 degrees within 2 minutes, the open window function will be activated, the heater will stop working. The screen will display like below.
• Press to get back working.

Wifi connection

• Press more than 3 seconds, the logo will indicate, open the APP, and follow the instructions to connect it.

CLEANING & MAINTENANCE

• Switch off and unplug from the power supply before cleaning.
• Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the product.
• CAUTION: Allow the product to completely cool before handling or cleaning it.
• Do not allow water or other liquids to run into the interior of the product, as this could create a fire and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a vacuum cleaner nozzle over the guards to remove any dust or dirt that may have accumulated inside or on the unit.
• CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the plastic components.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>