OMNI-RAY LIGHTING 5CCT-20230603 Wall Sconce Black Kelvin Adjustable Farmhouse Wall Mount Light Installation Guide
- August 9, 2024
- OMNI-RAY LIGHTING
Table of Contents
OMNI-RAY LIGHTING 5CCT-20230603 Wall Sconce Black Kelvin Adjustable
Farmhouse Wall Mount Light
FIXTURE INSTALLATION
Important: Read all instructions in order to ensure safety and proper installation. DO NOT operate this product under any conditions other than those for which it is specified. Failure to observe these precautions can lead to electrical shock, product failure, or other problems.
PARTS LIST
- Double Anti-UV Shades
- LED Fixture
- Wire
- Mounting Plate
- CCT adjustable switch
Specification| Power| Voltage| Length| Width|
Height| Equlvalent to
---|---|---|---|---|---|---
14″ Outdoor LED Wall Light| 22W| 100-277V AC| 355mm|
123mm| 158mm| 200W
MAINTENANCE
READ ALL INSTRUCTIONS TO ENSURE SAFETY AND PROPER INSTALLATION.
- DO NOT operate this product under ANY conditions other than those specified for it. Failure to observe these precautions can lead to electrical shock, product failure or other problems.
- TURN OFF THE POWER at the electrical panel before installation or maintenance.
- DO NOT modify this fixture. ANY modifications may render the product unsafe and void the warranty.
- This product is rated for outdoor use.
Limited Warranty
The warranty applies to the product from the original date of purchase for three (3) years against manufacturing defects. The owner must provide a copy of the original proof of purchase. The manufacturer’s obligation under this warranty is limited to repairing or replacing the component. It is not related in any way to the cost of the connection, the installation of the replacement parts, or cost of transport.
Package Content
- 14-lunch Wall Lamp x1
- Wire Connectors x 3
- Screws x 4
- Mounting plate x 1
WARNING
Turn the power OFF from the electrical panel before installation or
maintenance.
- Take off the mounting bracket from the light fixture.
- Attached the mounting bracket to the J-box/wa/1 by 2 screws.
- Use push-in wire connectors to connect the wires.
- Select your ideal CCT through the CCT switch.
- Fix the light fixture to the mounting bracket by 2 screws on the side.
- Installation is done.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>