OMNI-RAY LIGHTING AST-FL17-25WBH5DA1 Bullet LED Floodlight Fixture Instruction Manual

OMNI-RAY LIGHTING AST-FL17-25WBH5DA1 Bullet LED Floodlight Fixture

Product Information

• Product Name: Bullet Flood LED Light
• Brand: Omni-Ray Lighting TM

Features:

• Beautiful bullet flood landscape lighting
• Easy to install and operate with 30/40/50k tunable colors
• Energy saving, long lifespan
• Light is soft and uniform, safe to eyes
• Instant start, NO flickering, NO humming
• Green and eco-friendly without mercury

Suitable Applications:

• Outdoor basketball court, tennis court
• Badminton court, the football field
• The school playground, stadium
• Community leisure entertainment plaza
• Warehouse, factory, and workshops
• Highway toll station
• Meeting room, exhibition hall
• Gymnasium and supermarkets, etc. plaza

Construction: Heavy die-cast aluminum alloy housing with bronze powder- coated finish.

Electrical:

• Power Factor: 0.9
• Wattage: 25W
• Voltage/Current Input:
  • 120V – 0.2A
  • 277V – 0.36A
• Light Efficiency: 128LM/W
• Kelvin Options: 3000K/4000K/5000K

Dimension: 3.97 x 6.33 x 4.05 inches

Warranty: 5-year limited warranty. Actual performance may differ as a vresult of end-user environment and application.

Product Usage Instructions

Cautions:

1. Cannot use the electric generator to test the LED light.
2. Please abide by related country, regional, and local laws and regulations when installing this fixture.
3. To avoid electrical shock and damage, do not install the lights in rainy days.
4. Turn off the power before installation or maintenance. Proper grounding is required to ensure safety.

Notices:

1. To prevent electric shock or fire risk, installation must be conducted by an operator with professional electrical knowledge.
2. Wear gloves to avoid injury before installing lights.
3. If there are situations such as smoke or fire in the wires or lights during or after installation, turn off the power immediately and notify relevant personnel for an overhaul.
4. This light can be used for outdoor installation.

Installation Steps:

1. Take the light out of the package.
2. Finish wire connection according to the right mode of connection (pay attention to positive wire, negative wire, and ground wire), and then put the wire into the light pole.
3. Loosen screws, adjust fixture angle as per actual demands, and tighten screws later. The angle of the fixture is adjustable.
4. Pass the bracket through the mounting surface, fix it with screws, then connect the wires as per proper wiring requirements.

Note : Please refer to the user manual for detailed instructions and safety guidelines.

Bullet Flood LED Light

FEATURES

• Beautiful bullet flood landscape lighting
• Easy to install and operate with 30/40/50k tunable colors. Energy saving, long lifespan
• Light is soft and uniform, safe to eyes.
• Instant start, NO flickering, NO humming
• Green and eco-friendly without mercury

SUITABLE APPLICATIONS

• Outdoor basketball court, tennis court
• Badminton court, the football field
• The school playground, stadium
• Community leisure entertainment plaza
• Warehouse, factory and workshops
• Highway toll station
• Meeting room, exhibition hall
• Gymnasium and supermarkets, etc. plaza,

CONSTRUCTION:
Heavy die-cast aluminum alloy housing with bronze powder-coated finish.

OPTICAL SYSTEM:
Lumileds 2835LED chips. High quality tempered PC lens optics.38° beam angle.

WARRANTY:
5-year limited warranty. Actual performance may differ as a result of end-user environment and application.

PERFORMANCE

Model NO

|

Power Factor

|

Wattage

| Voltage/CurrentInput|

Light Efficiency

|

Kelvin Options

---|---|---|---|---|---
120V| 277V
AST-FL17-25WBH5DA1| 0.9| 25W| 0.2A| 0.36A| 128LM/W| 3000K/4000K/5000K

ELECTRICAL:
Available as 120-277V input,0-10V dimmable. -40°C to 45°C.

INSTALLATION & MOUNTING:
Angle-adjustable Knuckle Bracket mount for pole mounting.

Electric Characteristic

DIMENSION

DISTRIBUTION DIAGRAM

AST-FL17-25WBH5DA1

• Test Number: AST-FL17-25WBH5DA1: C0/180,37.5°
• Lumens:3500LM: C30/210,40°
• Test Number:25W: C60/240,36°
• Test Number:5000K: C90/270,38.5°

LED Flood Light Instruction

Cautions:

1. Can not use the electric generator to test the LED light.
2. Please abide by related country, regional and local law and regulations when install this fixture.
3. To avoid electrical shock and damage, please do not install the lights in raining days.
4. Please turn off the power before installation or maintenance. Proper grounding is required to ensure safety.

Notices:

1. To prevent from electric shock or fire risk, installation must be conducted by operator with professionalelectrical knowledge.
2. Please wear gloves to avoid injury before installing lights.
3. During or after installation, if there are situations such as smoke, fire in the wires or lights, please turnoff the power immediately and notify relevant personnel for an overhaul.
4. This light can be used for outdoor installation.

Wiring Diagram

• Step 1 : Take the light out of package(Figure1);
• Step 2 : Finish wire connection according to the right mode of connection (pay attention to positive wire, negative wire, and ground wire). and then put wire into light pole(Figure2);
• Step 3 : Loosen screws; adjust fixture angle as per actual demands and tighten screws later; (Figure3);
  • Tips : Angleof the fixture is adjustable(Figure3 (pass the bracket through mounting surface, fix it with screws, then connect the wires as per proper wiringrequirements.)(Figure4)
• Step 4 : when mounting on wall or ceiling with canopy, need to calk the all side to seal the mounting surface.(Figure.5)

1/2 ADJUSTABLE FITTER MOUNTING (1/2AM)

• Step 1: Take the light out of package(Figure6);

• Step 2: Finish wire connection according to the right mode of connection pay attention to positive wire, negative wire, and ground wire), and then put wire into light pole[Figure7];

• Step 3: Loosen screws; adjust fixture angle as per actual demands and tighten screws later;
  

  • Tips :Angleof the fixture is adjustable(Figure8]; (pass the bracket through mounting surface, fix it with screws, then connect the wires as perproper wiring requirements.)

Funtion adjustment

• Step 1: Open the metal plug and with a screwdriver (figure9) ,
  • Then slide the switch left and right to adjust the CCT controller, Adjust the color temperature as required (figure10).
• Step 2: After adjusting the required control function, tighten the metal plug (figure11).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>