NEFF I98WMM1Y7B Glass Draft Hood Installation Guide
- August 9, 2024
- Neff
Table of Contents
NEFF I98WMM1Y7B Glass Draft Hood
Product Specifications
- Model: iN989w0,mDomw1YN7BDraft hooD
- Size: 90 cm
- Design: Flex Design
- Integration: Seamless integration behind the hob for a single surface look
- Technology: Guided Air technology for effective extraction, Climate Control Sensor for power and noise optimization
Product Usage Instructions
Installation
- Ensure all installation accessories are available.
- Follow the dimensioned drawings provided in the manual for correct placement.
- Use the optional Flex Design trims according to your preference (A.Grey, B.Bronze, D.Black, M.Silver).
Operation
- Turn on the Glass Draft Hood before starting to cook.
- Adjust the power levels based on your cooking needs.
- The Climate Control Sensor will automatically optimize power and noise levels.
Maintenance
- Clean the clear glass panel regularly to maintain visibility.
- Check and replace filters as recommended in the manual.
- Ensure proper ventilation around the hood for efficient operation.
Frequently Asked Questions (FAQ)
-
Q: Can the Glass Draft Hood be installed with any cooktop?
A: The Glass Draft Hood is designed to integrate seamlessly with the cooktop using special accessories. -
Q: How often should I clean the clear glass panel?
A: It is recommended to clean the clear glass panel regularly to maintain visibility, ideally after every few uses.
The Glass Draft Hood seamlessly integrates into the kitchen, with ability to install behind the hob for a single surface look and clear glass panel when in use. Powered by new Guided Air technology for effective extraction, and Climate Control Sensor to optimise the power and noise levels as you cook.
- Guided Air Technology – Equally powerful steam extraction all over the cooktop regardless of the pans’ or pots’ location
- Glass Panel with Illumination – 25 million colour options for inspiring illumination of your cooktop
- Easy Access Filter – A simple push of a button is enough to remove the easy access filter for a good wash in the dishwasher
- High Extraction Rate – ensures a clear view while cooking thanks to an efficient motor technology
- Cooktop-based Hood Control – Adjust your hood´s extraction level and lighting.
Optional accessories
Z5802GLAY0 Flex Design trims glassdraft A.Grey, Z5802GLBY0 Flex Design trims
glassdraft B.Bronze, Z5802GLDY0 Flex Design trims glassdraft D.Black,
Z5802GLMY0 Flex Design trims glassdraft M.Silver, Z861SB1 90° flat duct bend
horizontal, Z861SB2 90° flat duct L vertical, Z861SI0 Adapter round-flat,
Z861SI1 90° Adapter round-flat, Z861SM1 Straight tube 500mm, Z861SM2 Straight
tube 1000mm, Z861SS1 Connector sleeve (female), Z92WWB1X6 Clean Air Plus odor
filter (replacement), Z92WWI1X7 Clean Air Plus recirculation kit, Z92WWJ12
Long Life recirculation kit, Z92WWM11 Installation kit remote motor, Z92WWY9X2
Mounting kit for seamless installation, Z9302GLAY0 Flex Design seaml.
glassdr+hob A.Grey, Z9302GLBY0 Flex Design seaml. glassdr+hob B.Bronze,
Z9302GLDY0 Flex Design seaml. glassdr+hob D.Black, Z9302GLMY0 Flex Design
seaml. glassdr+hob M.Silver, Z93WWX1X1 Flat duct adapt.round 90° DN150 Metal,
Z93XXX1X1 Aluflex pipe cyl. 150
Installation accessories
- Z5802GLAY0 Flex Design trims glassdraft A.Grey
- Z5802GLBY0 Flex Design trims glassdraft B.Bronze
- Z5802GLDY0 Flex Design trims glassdraft D.Black
- Z5802GLMY0 Flex Design trims glassdraft M.Silver
- Z9302GLAY0 Flex Design seaml. glassdr+hob A.Grey
- Z9302GLBY0 Flex Design seaml. glassdr+hob B.Bronze
- Z9302GLDY0 Flex Design seaml. glassdr+hob D.Black
- Z9302GLMY0 Flex Design seaml. glassdr+hob M.Silver
Features
Technical Data
- Typology: ……………………………………………………………. Downdraft
- Length electrical supply cord: …………………………………… 130.0 cm
- Min. required niche size for installation (HxWxD): ………..703mm x 854.0mm x 123mm mm
- Net weight: ……………………………………………………………… 38.0 kg
- Type of control: …………………………………………………….. Electronic
- Number of speed settings: ……………………….. 3-stage + 2 intensive
- Maximum output air extraction: …………………………………519 m³/h
- Boost position output recirculating: ……………………………596 m³/h
- Maximum output recirculating air: …………………………….. 456 m³/h
- Boost position air extraction: …………………………………….833 m³/h
- Maximum Air flow: …………………………………………………. 519 m³/h
- Noise level: ………………………………………………… 62 dB(A) re 1 pW
- Diameter of air outlet: ………………………………………………. 150 mm
- Grease filter material: …………………………. Washable stainless steel
- EAN code: ……………………………………………………4242004270799
- Connection Rating: …………………………………………………….. 300 W
- Fuse protection: …………………………………………………………….10 A
- Voltage: ……………………………………………………………….220-240 V
- Frequency: ……………………………………………………………..50-60 Hz
- Plug type: ……………………………………………………………….. GB plug
- Installation typology: …………………………………………………..Built-in
- Delay Shut off modes: ………………………………………………… 10 min
Variant
- 90 cm wide
- For installation in a kitchen cabinet, Integrated
- Suitable for ducted extraction and recirculation
Design
- Extendable clear glass panel with edge lighting
- edges illuminated
- Flex design: Exchangeable side trims, available in various colours and lengths (not included in the standard delivery)
- Pure surface design: suitable for seamless installation to create a unity look with the cooktop (special accessories required)
Comfort
- Touch control
- The standard functions are located on the right-hand user interface
- Touch control for extractor speeds and light
- 3 power levels and 2 intensive settings
- Automatic revert setting
- Automatic intensive revert (6mins)
- Automatic after running (10 minutes)
- climateControl Sensor
- Hob-Hood control (with Wi-Fi enabled hob)
- Fully automatic hood
Features
- Ambient light
- 2 metal grease filter cassettes
- Saturation indicator for metal and charcoal filter
- The filter service button automatically lifts filters into service position for easy removal
- The glass panel can be easily removed and cleaned
Connectivity
- Remote Monitoring and Control for connected home appliances and operation via smartphone or tablet (only in countries where Home Connect service is available)
- The Home Connect functionality can be extended by integrating numerous applications from external cooperation partners (partnerships)
- Voice Control enabled via popular voice assistants (only in countries where this service is available)
- Interval function: available via Home Connect
- Silence function: available via Home Connect
Performance
- Extraction rate according to EN 61591 ø 15 cm:
- max. Normal use519m³/h
- Intensive833 m³/h
- Noise level according to EN 60704-3 and EN 60704-2-13 exhaust air:
- Max. normal use:62dB(A) re 1 pW
- Intensive:71 dB(A) re 1 pW
- With the Clean Air Plus recirculation kit (available as optional accessory) your appliances reaches:
- Extraction rate in recirculation mode: Max. normal use:456m³/h
- Intensive:596m³/h
- Noise level in recirculation mode: Max. normal use:66dB(A) re 1 pW
- Intensive:71 dB(A) re 1 pW
- Efficient BLDC technology
Planning and installation information
- Suitable for installation in an island or Semi-island kitchen solution
- Suitable for installation into 90 cm cabinet
- Not suitable for combination with gas hobs
- Please reference the built-in dimensions provided in the installation drawing
- For recirculated extraction Clean Air Plus recirculation kit (accessory) needed
- For remote motor installation, special accessory kit (Z92WWM11) is needed
- Built-in dimensions (HxWxD): 703 x 854 x 123 mm
- Dimensions (HxWxD): 709 x 918 x 140 mm
- Extension height 250 mm
- Extractor hose 150 mm
- Electrical cable length 1.3 m
Consumption Data
- Energy Efficiency Class: A (at a range of energy efficiency classes from A+++ to D)
- Average Energy Consumption: 37.8 kWh/year*
- Blower Efficiency Class: A*
- Lighting Efficiency Class: -*
- Grease Filtering Efficiency Class: C*
- Power rating: 300 W
Dimensioned drawings
Measurements in mm
Combination with electric hob
Standard, top-mounted installation
Standard: with worktop divider between downdraft and hob
Combination with gas hob is not possible
To prevent power loss, observe the following:
- Do not install upper cabinets or open shelf elements above the appliance
- Left/right distance between appliance and wall/adjacent upper cabinet min. 500 mm
- Distance between appliance frame and wall min. 50 mm
Measurements in mm
Standard, top-mounted installation
Standard: with worktop divider between downdraft and hob
- A: ≥ 20 mm between the Guided Air suction area and a cabinet wall
- B: 60 mm for air recirculation 2′ 100 mm for air extraction with ducting in the plinth
- C: Motor unit must always be accessible
Measurements in mm
Seamless, top-mounted installation
(Special accessory required)
- A: Worktop overlap to kitchen cabinet
- B:≥ 20 mm between the Guided Air suction area and a cabinet wall
- C: ≥ 60 mm for air recirculation 2′ 100 mm for air extraction with ducting in the plinth
- D: Motor unit must always be accessible
Planning recommendation, air recirculation
Standard installation: Partially laid around the toe kick
Installation with fully laid pipework to the toe kick for poorly insulated exterior walls or above cold floors
Measurements in mm
Combination with electric hob
Seamless, top-mounted installation
A: Worktop overlap to kitchen cabinet
Combination with gas hob is not possible
To prevent power loss, observe the following:
- Do not install upper cabinets or open shelf elements above the appliance
- Left/right distance between appliance and wal l/adjacent upper cabinet min. 500 mm
- Distance between appliance frame and wall min. 50 mm
Measurements in mm
Combination with electric hob
Standard, top-mounted installation
Standard: with worktop divider between downdraft and hob
Combination with gas hob is not possible
To prevent power loss, observe the following:
- Do not install upper cabinets or open shelf elements above the appliance
- Left/right distance between appliance and wall/adjacent upper cabinet min. 500 mm
Measurements in mm
Combination with electric hob
Seamless, top-mounted installation
A: Worktop overlap to kitchen cabinet
Combination with gas hob is not possible
To prevent power loss, observe the following:
- Do not install upper cabinets or open shelf elements above the appliance
- Left/right distance between appliance and wall/adjacent upper cabinet min. 500 mm
Measurements in mm
A: Installation of motor unit on front/rear or offset laterally with max.
3 m clearance (special accessory required)
Motor unit must always be accessible
B: 5.5 mm
C: Special accessory required
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>