Eseecloud F2 Security Camera App User Guide
- August 9, 2024
- EseeCloud
Table of Contents
Eseecloud F2 Security Camera App
Product Information
Specifications:
- Model: XYZ-2000
- Power: 120V, 60Hz
- Capacity: 1.5 liters
- Material: Stainless steel
- Dimensions: 10 x 8 x 12 inches
Product Usage Instructions
Initial Setup:
Before using the product for the first time, wash all removable parts with
warm soapy water and dry thoroughly.
Filling the Water Tank:
Open the lid of the water tank located at the back of the unit.
Fill it with water up to the maximum level indicator.
Adding Coffee Grounds:
Open the coffee filter compartment and add the desired amount of coffee
grounds based on your preference.
Brewing Process:
Place the carafe under the coffee outlet and select your desired brewing
strength using the control panel. Press the brew button to start the brewing
process.
Cleaning and Maintenance:
Regularly clean the coffee filter, carafe, and exterior of the machine with
a damp cloth. Descale the unit as per the instructions in the manual to
maintain optimal performance.
Frequently Asked Questions (FAQ):
-
Q: How often should I descale the coffee maker?
A: It is recommended to descale the coffee maker every 2-3 months depending on your usage and water hardness. -
Q: Can I use ground coffee with this machine?
A: Yes, you can use ground coffee in this coffee maker by placing it in the designated filter compartment. -
Q: What is the warranty period for this product?
A: The product comes with a standard 1-year warranty against manufacturing defects.
Device connection
Download the APP
Use your phone to scan the QR code below to download the application, while
users can use the APP Store/Google Play to search for Eseecloud APP to
download.
Download “Eseecloud” APP
SIGNUP/LOGIN
-
Please register an APP account and log in.
Step 1: New User need to sign up an account and select your country. Step 2: Click “Sign up” then Enter your email, user name and password, Complete the verification and Sign in your account. -
If you already have a Eseecloud account, Login directly.
Connection Operation Video
On the APP home page, you can learn by watching the WIFI camera connection operation video.
ADD DEVICE
Step 1: Power on the camera until you hear a APP connection prompt
(If you don’t hear the APP connection prompt, please press the ” RESET” on the
device. )
Step 2: Click”+” on App right corner under Home page.
There will have multiple connection way for you to adding the device.
Scan code binding
Follow below tips to connect the WiFi
- Use the phone camera to scan the QR code on the camera body
- Input the 2.4G or SG WiFi name and password Some models do not support 5G.
- QR code scanning success , click
- Waiting 1-2 Minutes Connect to the WiFi
Scan code binding
- The QR code displayed by the APP is aligned with the camera lens, keep it 15-30 centimeters and wait for the camera to scan it.
- After the camera scans the QR code successfully and finishes configuring the network, it automatically jumps the binding interface.
Add Completed
- At the Installation Environment Test screen, select “Skip”.
- Add Camera Complete.
FCC Caution
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>