MINISS X33 Wireless Earbud Instruction Manual
- August 7, 2024
- MINISS
Table of Contents
MINISS X33 Wireless Earbud
How to wear headphones correctly
Product Description
Specification of Product
- Model of Product: X60
- Version: VS.4
- Effective Distance : Approx. 1 Om
- Speaker Diameter: <fllSmm
- Impedance : 8±15%Q
- Frequency Response : 20Hz-20KHz
- Microphone Sensitivity: -42dB
- Input: 5V 180mA
- Duration : Approx. 9 H
- Charging Time: Approx. 1.5 H
Touch Operation
Connect with Bluetooth device
Select “MINISO-X60” in BT menu to connect. Prompt: connected.
Indicator Light Description
- When the headphones are turned on: red and blue lights alternate flashing.
- When the headphones are turned off: the red light flashes quickly 3 times, then goes out.
- In pairing mode: the red and blue lights alternate flashing.
- Charging: The red light stays on during charging, and the blue light stays on when fully charged.
Power On
- Power On: Press & hold the button + for 3 seconds, red & blue LED flash. Prompt: power on pairing.
Power Off
- Power Off: Press & hold the button + for 5 sec, red LED flash. Prompt: power off.
Once Press
Double Press
Long Press
Triple Press
Item list
FCC STATEMENT
FCC ID: 2BHJR-X60
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in port. able exposure condition without restriction.
Warranty statement
MINISO product warranty card
Product number| | ****
SN number
|
---|---|---|---
User info
| ****
name
| | ****
Purchase date
|
telephone
|
address
|
Invoice number
|
Sales unit information
| ****
name
| ****
(stamp)
address|
telephone
|
The above guarantee does not apply to the following situations
- The validity period of the three guarantees has been exceeded;
- Altering of the warranty cards and product code does not match the product itself;
- Failure of damages caused by misuse, abuse, or improper transportation, use, maintenance or storage;
- Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
- Zippers and tower buckles are damaged due to excessive force;
- Off-line or tear caused by overloading;
- Any damage caused by sharp objects;
- Products with signs of burn damage or waterlogging;
- Damage caused by unauthorized dismantling and modification;
- Aging, discoloration, wear, cracking, and other losses that occur during normal use of the product.
- If the product’s original logo or label is changed or damaged, this warranty will be invalid.
Warranty Policy
Disclaimer:
This manual does not come with any form of warranty, position expression or
other implications. The products, specifications, and information mentioned
inthis manual are for reference only, and the content will be updated on the
website at any time without prior notice.
Warranty statement:
The following guarantee is made for the products attached to this document: If
the product is damaged due to quality defects under normal use within
twelve(12) months from the date of your purchase (the warranty Period”), and
if it can be repaired, it will be repaired free of charge; If the manufacturer
confirms that it cannot be repaired, it will be replaced free of charge; the
repaired product will continue to be covered by the warranty for the remaining
warranty period(a minimum of not less than 30 days). The purchase date shall
be based on the sales invoice date; if the purchase date cannot be determined,
the warranty period shall be calculated as thirteen(13) months from the
product production date.
If you want to apply for a warranty, please call the product service hotline
first and follow our instructions. When applying for a warranty, you are
required to provide a valid sales invoice that is accurate, complete and
clearly filled out.
The completeness and appearance of the product and accompanying materials are
not covered by the warranty. You should inspect the product on site when
receiving it and raise objections to any discrepancies.
MINISO Prodict service policy
If you encounter a problem, please contact our customer service to solve it.
After-sales email : 7@hifi-earphone.com
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth
headset. If the user makes modifications or modifications to this Bluetooth
headset without permission, the user will lose the right to continue to enjoy
the services included in the device
- Electromagnetic interference:
- Electronic devices: To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device in accordance with the regulations in place with dear instructions.
- Civil Aviation : After boarding the plane, please turn off your Bluetooth headset according to the flight attendant’s instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft communication system.
- Safety matters:
- Placement : It is recommended that when you are not using the Bluetooth headset, place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury.
- Children : Do not let children play with Bluetooth headsets. Some of the small parts are detachable and may be swallowed and cause danger.
Important safety tips
-
Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
-
This product contains a built-in rechargeable battery, It is prohibited to hit, squeeze, Puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, please stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as the sun, heaters, or stoves. After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight, or other high-temperature and high-pressure environment to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one. However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type. battery usage.
-
After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
-
During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice
out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference. -
When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause The battery to be damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
CONTACT
Company name: REP America LLC
- Address : 1942 Broadway St. STE 314C, Boulder,
- CO 80302, United States
- Contact Person: Ben Xu
- Email : d.zeng@rep-europe.de
- ContactPhone : 719-201-3314
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>