Instructables HE007 Flashing LED Globe DIY Kit Instruction Manual

Instructables HE007 Flashing LED Globe DIY Kit Instruction Manual

HE007 Flashing LED Globe DIY Kit

Introduction:

HE007 is a Flashing LED Globe DIY Kit. It adopts a PCB three-dimensional structure design combined with motor rotation and LED light flashing circuit. Built-in 3 music at automatic looping playing mode if turn ON music play switch. Also can adjusting the rotational speed.
It is a very interesting DIY electronic product which enables users to understand the circuit more clearly and learn soldering skills.

Function:

1. 48 LED Flashing Automatically
2. 3 Music Automatic Playing
3. Adjustable Rotational Speed
4. Adjustable ON/OFF Rotational
5. Adjustable ON/OFF Music
6. DIY Hand Soldering

Parameter:

1. Work Voltage:DC 4.5V-5V
2. Power Type: DC-005
3. LED Color: Blue+White
4. Work Temperature:-40℃~85℃
5. Work Humidity:5%~95%RH
6. Size(Installed):7575155mm

Use Methods:

1. Connect USB Power Wire to provide working power.
2. Switch Toggle Switch SW1 to turn ON/OFF music playing function.
3. Switch Toggle Switch SW2 to turn ON/OFF rotation function.
4. Rotate the potentiometer to change the rotation speed.

Component Listing:

Application:

1. Training welding skills
2. Student school
3. DIY production
4. Project Design
5. Electronic competition
6. Gift giving
7. Home decoration
8. Souvenir/Crafts collection
9. Graduation design
10. Holiday gifts

Note:

1. It uses springs to connect different PCB internally to provide power, so the springs produce noise when rotating, which cannot be avoided.

Installation Tips:

1. User needs to prepare the welding tool at first.
   1.1>.Soldering iron (<50 Watt)
   1.2>.Rosin core (“radio”) solder
   1.3>.Wire cutters/strippers
   1.4>.’ + ’ screwdriver

2. Please be patient until the installation is complete.

3. The package is DIY kit.It need finish install by user.

4. The soldering iron can’t touch components for a long time(1.0s), otherwise it will be damaged.

5. Pay attention to the positive and negative of the components.

6. Strictly prohibit short circuit.

7. User must install the LED according to the specified rules.Otherwise some LED will not light.

8. Install complex components preferentially.

9. Make sure all components are in right direction and right place.

10. It is strongly recommended to read the installation manual before starting installation!!!

11. Please wear anti-static gloves or anti-static wristbands when installing electronic components.

Installation Steps(Please be patient install!!!):

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>