XKT V1202 Mini Party Light BT Speaker Instruction Manual
- August 6, 2024
- XKT
Table of Contents
XKT V1202 Mini Party Light BT Speaker
Product Specifications
- Laser source: 532nm green laser / 650nm red laser
- LED light source: Three in-one RGB+UV purple light beads
- Scanning system: Precision mirror
- Charging voltage: 5V
- Working voltage: 3.7-4.2V
- Working current: 550mA
- Battery capacity: 5000mAh
- Input sensitivity: 400mV
- Signal-to-noise ratio: 80dB
- Bluetooth version: V 5.2
- Audio output power: 8W
- Bluetooth receiving distance : 3-5m
- Charging time: 5-6 hours
- Working time: about 3-4 hours
- Product gross weight: 900g
- Product net weight : 640g
- Product colors: black, blue, pink, green
Product Usage Instructions
Safety Instructions:
- Avoid direct laser irradiation on eyes near the light source to prevent discomfort.
- Do not allow children to operate the product alone.
- Provide safety instructions before operation.
Usage Guidelines:
This product is an atmosphere lighting fixture and not a primary lighting
source. For best results:
- Use in dimly lit places or at night.
- Achieve optimal lighting effect within a distance of 10 meters.
FCC Compliance:
This device complies with Part 15 of the FCC Rules. For proper operation:
- Avoid causing harmful interference.
- Accept any interference received, including undesired operation
- Avoid changes or modifications not approved by the responsible party.
- Avoid co-location with other antennas or transmitters.
Radiation Exposure Statements:
The device meets general RF exposure requirements for portable exposure
conditions without restriction for both speaker and microphone radiation
exposure.
Function introduction
- Light keys
- Volume –
- Volume +
- A Play/Pause, Mode keys
- Red light
- Green light
- RGB three-color light
- Purple light
- microphone power supply
- Microphone Previous/Next
- Accompaniment singing
- OFF/ON
- TF 15 Type C Port
- USB Port
- Type C Port
Operation manual
1. Turn on the OFF/ON button, enter Bluetooth mode, and find V12 on your
phone Once the model pairing is successful, music can be played
2. Insert TF card/USB drive to play music
3. For Light adjustment, press once to turn off the RGB+UV purple light, then
press again Turn off the red laser, press again to turn off the green laser,
and press again to Turn on all light sources
4. When playing music, long press to increase volume, short press one song,
long press Reduce volume, short press the previous track
5. Short press on the play button to enter pause mode, long press the play
button to enter Bluetooth mode, FM mode, TF card mode, USB mode
6. Short press the playback button twice in a row to enter the accompaniment
mode
7. Long press the microphone power button to automatically pair V12, and you
can sing at this time
8. Short press the microphone sound to add (next track), short press the
microphone sound to decrease (Previous song)
9. Short press the microphone playback button to enter the pause mode.
Product parameters
Safety precautions:
- This product belongs to Class III B laser products, and it is important to avoid laser irradiation on the eyes close to the light source, otherwise it may cause discomfort to the eyes.
- Please provide safety instructions before the other one. operate.
- This product is suitable for indoor use, with a protection level of IP20, suitable for dry environments.
- Please avoid exposure to moisture, corrosion, overheating, or undercooling,
- When used in dusty environments with temperatures below 5 °C, the laser may not work.
Solemnly declare:
This product is an atmosphere lighting fixture, not a lighting fixture. It is
generally best used at night or in dimly lit places, with the best lighting
effect within a distance of 10 meters.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
-
Speaker: Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction. -
Microphone: Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.
FAQ
Q: Can this product be used during the day?
A: This product is best used at night or in dimly lit places for optimal
effect.
Q: What is the Bluetooth version of this product?
A: The Bluetooth version is V 5.2.
Q: How long does it take to charge the product?
A: Charging time is approximately 5-6 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>