THOMAS-CONRAD TC4145 16/4 NEXT GEN Instructions
- August 7, 2024
- THOMAS-CONRAD
Table of Contents
THOMAS-CONRAD TC4145 16/4 NEXT GEN
Product Information
Specifications
- Brand: THOMAS-CONRAD CORPORATION
- Model: TC4145 16/4 (NEXT GEN)
- NIC Type: Token Ring
- Transfer Rate: 4/16Mbps
- Data Bus: 16-bit ISA
- Topolgy: Ring
- Wiring Type: Shielded twisted pair or Unshielded twisted pair
- Boot ROM: Available
- RAM Size Configuration: 128KB or 512KB
Product Usage Instructions
Jumper Settings
Make sure the JB1 pins are set as follows:
- Pins 2 & 3 closed
- Pins 1 & 2 closed
LED Diagnostic Status
- LED1: Green – Indicates the adapter is inserted into the ring.
- LED2: Red – Indicates data is being transmitted/received.
FAQ
Q: What do the LED colors indicate?
A: Green LED indicates the adapter is inserted into the ring, while the Red LED indicates data transmission/reception.
Chapter 5: Jumper Settings
THOMAS-CONRAD CORPORATION TC4145 16/4 (NEXT GEN)
NIC Type Transfer Rate Data Bus Topology Wiring Type
Boot ROM
Token Ring 4/16Mbps 16-bit ISA Ring Shielded twisted pair Unshielded twisted pair Available
N1112 LEDS1&2
BOOT ROM
N1112A 12
RAM SIZE CONFIGURATION Size 128KB 512KB Note: The location of JB1 is unidentified.
JB1 Pins 2 & 3 closed Pins 1 & 2 closed
Continued next page…
1
THE NETWORK INTERFACE CARD TECHNICAL GUIDE
THOMAS-CONRAD CORPORATION TC4145 16/4 (NEXT GEN)
. . . continued from previous page.
LED LED1 LED1 LED2 LED2
Color Green Green Red Red
DIAGNOSTIC LED(S)
Status
Condition
On
Adapter is inserted into the ring
Off
Adapter is not inserted into the ring
On
Data is being transmitted/received
Off
Data is not being transmitted/received
2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>