Ultronics Lights VA12131 Floating Light Bulb User Manual
- August 5, 2024
- Ultronics Lights
Table of Contents
Ultronics Lights VA12131 Floating Light Bulb
INTRODUCTION
This creative bulb breaks through core technology with a Two-way drive auto control system, the bulb can be Upward caught once powered off, and it successfully solves the drop problem. Please read this manual instructions carefully, this manual gets you started quickly enjoying your Levitating light with a great initial experience. The manual may help you levitate your bulb easily and successfully, the manual guide includes important safety information and how to operate it correctly to avoid the accidents happens.
- Do not drop, strike, or cause any portion of the product to be struck or shaken aggressively, Such actions may damage the product and void your warranty.
- The bulb should be placed on a safe surface to avoid possible smashing.
- To avoid possible risk, Children under 12 years old are banned from operating.
Welcome to Top Levitating Light
What’s in the box
Your lightbox includes
- Base
- Adapter
- Manual
Operating instructions
- Getting Started Place the base on a flat surface, Connect the cable to the DC pot of the base, and Plug the adapter into your outlet (100-240VAC)
- To find the balance point You need to know that the bulb can be levitated is a balance of interaction force, you need to find the balance point, the balance point located at a 2cm position underneath the Top Device.
- To levitate the bulb Hold the bulb underneath the Top Device, Make sure the bulb is far away from the Top Device by 10cm at least, then move to the Top Device. you will know when you have approximately reached this point because the bulb will feel almost balanced in mid-air – not falling down and not being pushed up.
- Once you feel that you have reached the balance point you can begin to gently release your hold of the bulb. If it floats – Congratulations! If it falls – simply start over.
The Levitating light bulb is a representative application of magnetic levitation engineering, the techniques involved in operation are new to most people. Practice may be needed when learning how to properly operate this device. Do not become discouraged if you cannot achieve levitation after a few tries. With practice, you will become a master.
IMPORTANT!
The electromagnetic field sensor inside your Levitation device is designed to
automatically turn off power to the unit under certain conditions such as
overheating to prevent damage to the circuitry and ensure long product life.
So, if after a few tries, you have not successfully levitated the bulb please
wait a minute or more before your next attempt
CAUTIONS
The bulb may drop when you release your hand if you do not find the balance
point, Make sure the bulb can be protected when dropping. Smash void warranty.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body. This device complies with part 18 of the FCC Rules. Information on the following matters shall be provided to the user in the instruction manual or on the packaging if an instruction manual is not provided for any type of ISM equipment:
- The interference potential of the device or system
- Maintenance of the system
- Simple measures that can be taken by the user to correct interference.
- Manufacturers of RF lighting devices must provide an advisory statement, either on the product packaging or with other user documentation, similar to the following:
This should not be installed near radio equipment safety communication equipment or other critical navigation or communication equipment operating between 0. 45-30 MEz. Variations of this language are permitted provided all the points of the statement are addressed and may be presented in any legible font or text style.
Mobile Wireless Charging User Manual
Product Introduction
The wireless charger utilizes advanced wireless charging technology to provide
a fast and convenient charging method for your phone. Simply place your phone
on the charger. and it will automatically start charging.
Product Features
- Fast wireless charging
- Strong compatibility, supports a variety of phone models
- Intelligent recognition to prevent overcharging-Stylish design, highly portable
How to Use
- Connectto Power Connect the base of the product to a DC12 V power source.
- Place Phone Ensure the back of the phone is facing down, align it with the center of the charger, and then gently place it on the wireless charging symbol position on the base.
- Start Charging When the phone is correctly aligned with the charger, it will automatically start charging.
- Finish Charging After the phone is fully charged, it is recommended to remove it from the charger to extend battery life.
Precautions
- Ensure there are no obstacles between the back of the phone and the wireless charger.
- Avoid using in moist, hot environments or direct sunlight.
- Do not cover it with other metal objects while using the wireless charger.
- If the phone has a thick case, it may affect the charging efficiency; it is recommended to remove the case before charging.
Safety instructions
These instructions should arrays be reviewed before use.
- Remove all metallic items from your hands before using the product.
- The levitating Eight bulb is created for inside use only and is suitable for locations where the ambient temperature is between °C (22’T) and 135°C (95’T).
- Do not use the product in wet surroundings.
- The book base should only be placed on a horizontal surface and avoid surfaces affected by magnets including iron, metal: or other magnetic items as they may interfere with the device.
- Do not use a different AC Adapter than the one provided.
- If the product comes in contact with liquid, turn it off immediately.
- Let the book code down for approx. 5 minutes before touching it after extended periods of usage.
- The book base may become slightly warm during use. This is normal.
- Do not put objects that could be affected by strong magnetic fields near the levitating light bulb, such as metallic items, credit cards, hard disk drives, or pacemakers.