ANGUSTOS KVM0404K6P 4×4 HDMI 2.0 18Gbps Matrix Switcher User Manual

ANGUSTOS KVM0404K6P 4×4 HDMI 2.0 18Gbps Matrix Switcher

Specifications

• Technical HDMI Compliance: HDMI 2.0
• HDCP Compliance: HDCP 2.2 and HDCP 1.4
• Video Bandwidth: 18 Gbps
• Video Resolution: 4K2K 50/60Hz 4:4:4, 4K2K 50/60Hz 4:2:0, 4K2K 30Hz 4:4:4, 1080p, 1080i, 720p, 720i, 480p, 480i
• Output Scaling: 4K to 1080p
• 3D Support: Yes
• Color Space: RGB, YCbCr4:4:4, YCbCr4:2:2, YCbCr 4:2:0
• Color Depth: 8-bit, 10-bit, 12-bit [1080P, 4K30Hz, 4K60Hz (YCbCr 4:2:0)], 8-bit [4K60Hz (YCbCr 4:4:4)]
• HDMI Audio Formats: PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX,Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
• Coaxial Audio Formats: PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1
• L/R Audio Formats: PCM2.0CH
• HDR Support: Yes
• ESD Protection
• Connections:
  • Input Ports: HDMI IN / OUT
  • Output Ports: HDMI IN / OUT
  • Control ports: 1x TCP/IP [RJ45], 1x RS-232[3-pin phoenix connector], 1x IR EXT [3.5mm Stereo Mini-jack]
• Mechanical:
  • Housing Color: Black Metal Enclosure
  • Dimensions Weight
  • Power Supply: Input: AC100~240V 50/60Hz Output: DC12V/2.5A (Locking connector)
  • Power Consumption: 10W (max), 1.56W (Standby)
  • Operating Temperature
  • Resolution / Cable Length:
  • 4K60 Feet / Meters: 10ft / 3M
  • 4K30 Feet / Meters: 30ft / 10M
  • 1080P60 Feet / Meters: 42ft / 15M
  • The use of Premium High-Speed HDMI cable is highly recommended.

Product Usage Instructions

Setup and Connection
Make sure to read the user manual carefully before setting up the product.

Power Connection
Connect the provided locking power adapter to the power supply input of the matrix switcher.

Video and Audio Connection
Connect your input devices to the input ports and output devices to the output ports using HDMI cables.

Control Connection
If needed, connect control devices like TCP/IP, RS-232, or IR EXT for remote control functionality.

Operation Controls and Functions

Front Panel
The front panel includes buttons for selecting inputs and LEDs indicating the selected input for each output.

Rear Panel
The rear panel includes various control ports and audio outputs for the switcher.

Frequently Asked Questions (FAQ)

Q: Do I need surge protection for this product?
A: Yes, surge protection is recommended to protect the sensitive electrical components and extend the life of the equipment.

Q: What is the recommended cable length for different resolutions?
A: For optimal performance, use a Premium High Speed HDMI cable with lengths as specified in the user manual.

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction
This high performance HDMI Matrix Switcher can switch any of these four HDMI 2.0 sources to four HDMI 2.0 displays. Each input and output supports up to 4K60 444 resolution and HDCP 2.2. The outputs can be individually scaled for 1080p. De-embedded audio as analog L/R and coaxial is available for both outputs. The ARC function can return display device audio to coaxial port output only. Advanced EDID management is supported. With its 18Gbps bandwidth and the additional features with latest HDMI standards. This switcher can be controlled from the front panel, RS-232, IR remote, or TCP/IP.

Features

• HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• Four 18G HDMI 2.0 video inputs support up to 4K60 444 resolution
• Four 18G HDMI 2.0 video outputs support up to 4K60 444 resolution
• Four outputs can be individually scaled for 4K→1080p
• De-embedded audio to analog L/R and Coaxial ports output
• ARC audio return to the coaxial ports output only
• Built-in Web GUI for TCP/IP control
• Advanced EDID management supported
• Four methods of control: Front panel, RS-232, IR remote and TCP/IP
• Compact design for easy and flexible installation

Package Contents

Specifications

Technical

HDMI Compliance| HDMI 2.0
HDCP Compliance| HDCP 2.2 and HDCP 1.4
Video Bandwidth| 18 Gbps

Video Resolution

| 4K2K 50/60Hz 4:4:4

4K2K 50/60Hz 4:2:0

4K2K 30Hz 4:4:4

1080p, 1080i, 720p, 720i, 480p, 480i

All HDMI 3D TV formats

All PC resolutions including 1920 x 1200

Output Scaling| 4K to 1080p
3D Support| Yes
Color Space| RGB, YCbCr4:4:4,YCbCr4:2:2, YCbCr 4:2:0
Color Depth| 8-bit, 10-bit, 12-bit [1080P, 4K30Hz, 4K60Hz (YCbCr 4:2:0)]

8-bit [4K60Hz (YCbCr 4:4:4)]

HDMI Audio Formats

| PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS- EX,DTS-96/24, DTS High Res, DTS-HD Master

Audio, DSD

Coaxial Audio Formats| PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1
L/R Audio Formats| PCM2.0CH
HDR Support| HDR10, HDR10+. Dolby Vision, HLG
ESD Protection| Human-body Model: ±8kV (Air-gap discharge),

±4kV (Contact discharge)

Connections
Input Ports| 4×HDMI Type A [19-pin female]

Output Ports

| 4×HDMI Type A [19-pin female]

4×L/R audio out [3.5mm Stereo Mini-jack] 4×COAX audio out [RCA]

Control ports

| 1x TCP/IP [RJ45]

1x RS-232[3-pin phoenix connector] 1x IR EXT [3.5mm Stereo Mini-jack]

Mechanical

Housing| Metal Enclosure
Color| Black
Dimensions| 220mm (W)×105mm (D)×44mm (H)
Weight| 792g
Power Supply| Input: AC100~240V 50/60Hz

Output: DC12V/2.5A (Locking connector)

Power Consumption| 10W (max), 1.56W (Standby)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Resolution / Cable Length| 4K60 –

Feet / Meters

| 4K30 –

Feet / Meters

| 1080P60 –

Feet / Meters

HDMI IN / OUT| 10ft / 3M| 30ft / 10M| 42ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.

Operation Controls and Functions

Front Panel

OUT 1 / OUT 2 /

OUT 3 / OUT 4 Button

| Press to select the desired input.
IN 1 IN2 / IN3 / IN4 LED| Green LED indicates when the input is selected for respective output.

Rear Panel

GUI.
RS-232| 3-pin pluggable connector for RS-232 control of the Switcher.
IR EXT| IR eye input for IR control of the Switcher.
Coaxial Audio OUT 1

/ OUT 2 / OUT 3 / OUT 4

| RCA connector for coaxial audio output from HDMI OUT 1

/ OUT 2 / OUT 3 / OUT 4.

L/R Audio OUT 1

/ OUT 2 / OUT 3 / OUT 4

| 3.5mm Mini-jack connector for stereo audio output from HDMI OUT 1 / OUT 2 / OUT 3 / OUT 4.
Earthing Point| Screw terminal for earthing the Switcher.
HDMI Input 1 to 4| HDMI Source inputs 1 to 4.
HDMI Output 1 to 4| HDMI outputs for displays 1 to 4.
DC 12V IN| DC 12V input for 12V 2.5A PSU.

Connecting to the Switcher

1. Connect the desired HDMI input sources.
2. Connect the desired HDMI display devices.
3. Connect any CONTROL inputs that may be required: TCP/IP, RS-232 or IR IN.
4. Connect any audio devices to either the Coaxial or L/R outputs.
5. Connect the 12V DC PSU.

Using the Switcher

Power LED and Standby Mode

The Power LED provides the following indications:

Off

| The Switcher is in standby mode, this state can be changed by using API commands or IR Remote, or from the Web GUI interface.

Selecting Inputs

Manual Selection of the inputs is done by briefly pressing the OUT 1 / OUT 2 / OUT 3 / OUT 4 button repeatedly for that channel until the desired input is selected.

IR Remote

| Power on the Switcher or set it to standby mode.
---|---
Output 1 (Output 2 / 3 / 4)

1/2/3/4

| Select the desired input source to Output 1 port output, the corresponding green LED on the front panel illuminates.
SD| Switch downscale or bypass mode to the Output 1 port output.
| Select the last or next the desired input source to Output 1 port output, the corresponding green LED on the front panel illuminates.

Using the Bulit-In Web GUI Interface

The Switcher has a built-in Web interface to provide a means of controlling or configuring various settings. There are six pages available, each of which will be outlined in detail in the following sections:

The six pages are:

1. Status – Display information about the firmware and IP setting.
2. Video – Switch the desired input source to output and set the preset.
3. Input – Display information about the input signal and EDID setting.
4. Output – Display information about the output signal and scaler option.
5. Network – Allow basic network setting management and login options.
6. System – Panel lock, beep, serial baudrate setting and firmware update.

Note these six pages are only accessible in Admin mode, when User mode is used only the Status and Video pages are available.

To access the Web interface, enter the IP address of the switcher into the address bar of any web brower. The default IP address is 192.168.1.100. Please see the following operation method.

Note that if the IP address of the switcher is not know, use the RS-232 command given in the Network Setting section “r ip addr!” to discover the current IP address or set the switcher to factory default status and IP address restores to default 192.168.1.100.

Step 1: The TCP/IP port on the rear panel is directly connected a PC with an UTP cable.

Step 2: Set your PC IP address to the same network segment with Switcher, for instance set PC IP address to 192.168.1.200 and Subnet mask to 255.255.255.0.

Step 3: Enter the Switcher’s IP address into your brower on the PC to enter Web GUI page.

After entering the IP address the following log in screen will appear:

Select the Username from the list and enter the password. The default passwords are:

• Username User Admin
• Password user admin

After entering the log in details, click the LOGIN button and the following Status page will appear.

Status page
The Status page provides basic information about the product Model name,the installed firmware version and the network setting. This page is visible in both User and Admin modes.

The buttons at the top right of the web interface are always available and provide the following function:

• The Log out button will disconnect the current user from display the log in screen.
• The Power on button changes the power status of the Switcher between On and Stand-by mode.

Video page
The Video page allows selection of the inputs source and set the presets.

To this preset setting, first you need to select the desired input source to four output ports. Then click the Save button to save the setting. When you click the line Set button, this preset you have saved will be used. The Clear button will clear the preset. There are four presets setting available.

Input page
The Input page provides information about which inputs are connected and have a signal present. The inputs can be giving more meaningful names, if desired. The EDID column provides a list of EDID options for each individual input.

The following EDID options are available in any of the EDID drop-down lists:

• 1080P, Stereo Audio 2.0
• 1080P, Dolby/DTS 5.1
• 1080P, HD Audio 7.1
• 1080I, Stereo Audio 2.0
• 1080I, Dolby/DTS 5.1
• 1080I, HD Audio 7.1
• 3D, Stereo Audio 2.0
• 3D, Dolby/DTS 5.1
• 3D, HD Audio 7.1
• 4K2K30Hz_444 Stereo Audio 2.0
• 4K2K30Hz_444 Dolby/DTS 5.1
• 4K2K30Hz_444 HD Audio 7.1
• 4K2K60Hz_420 Stereo Audio 2.0
• 4K2K60Hz_420 Dolby/DTS 5.1
• 4K2K60Hz_420 HD Audio 7.1
• 4K2K60Hz_444 Stereo Audio 2.0
• 4K2K60Hz_444 Dolby/DTS 5.1
• 4K2K60Hz_444 HD Audio 7.1
• 4K2K60Hz_444 Stereo Audio 2.0 HDR
• 4K2K60Hz_444 Dolby/DTS 5.1 HDR
• 4K2K60Hz_444 HD Audio 7.1 HDR
• USER_1
• USER_2
• COPY_FROM_TX_1
• COPY_FROM_TX_2
• COPY_FROM_TX_3
• COPY_FROM_TX_4

This page also provides a means of sending a binary EDID file to either

User 1 or User 2 EDID memories:

1. Select the binary EDID file on your PC by click on the Browse button.
2. Select either User 1 or User 2 from the drop-down list.
3. Click the Upload button.

The EDID data from any input or from the User 1 and User 2 locations can be read and stored on your PC.

Output page
The outputs can also be assigned meaningful names, if desired. The Output page provides information about the signal status of the outputs.

The Scaler mode menu provides the following options:

The ARC buttons enable or disable the display device audio to the coaxial audio outputs. If the ARC function enables, the L/R audio port will have no voice output simultaneously.
The Stream buttons enable or disable the output signal for the respective output.

Network page
The Network page allows the configuration of the network settings.

Note that the IP address boxes are only accessible when the Mode button is set to Static.

The log in passwords can be changed on this page.
Note that any changes to this page will require the new details into the web browser and/or the log in screen.

System page

The system page allows setting of the panel lock and beep on/off, control RS-232 port baud rate.
This page is also used to install new firmware update, restore the factory default settings and reboot the Switcher.

API control command

The Switcher can also be controlled by RS-232. Connect a PC by using a serial cable and open any of a Serial Command tool on the PC such as Comm Operator, Docklight or hercules, etc to send command for controlling the Switcher. Please see the following connection diagram.

Important:

1. All messages sent to the Switcher must be terminated with an exclam- ation mark (!). Any carriage return that is present after the end of the command will be ignored.
2. All spaces shown in the commands are required.
3. All response messages are terminated by a CR/LF sequence.
4. When all four inputs are requested by the same command, the response will report each input on a separate line.
5. When four outputs are requested by the same command, the response will report each output on a separate line.

The ASCII list about the product is shown as below.

ASCII Command

Serial port protocal:        Baud rate：115200 (default), Data bits: 8bit, Stop bits:1, Check bit: None TCP/IP protocal port: 8000

The x, y, z and XXX are parameters.

RS- 232Command| Function description| Feedback
Power

s power z!

|

power on/off the device,z=0~1(z=0 power off, z=1 power on)

| power on

System Initializing… Initialization Finished! power off

r power!| get current power state| power on /power off

s reboot!

|

reboot the device

| Reboot…

System Initializing… Initialization Finished!

SYSTEM Setup
help!| Lists all commands|
r type!| Get device model| HDP-MXB44P

r status!

|

Get device current status

| Get the unit all status: power, beep, lock, in/out connection, video/audio crosspoint, edid, scaler,hdcp, network status
r fw version!| Get Firmware version| MCU FW version x.xx.xx
r link in x!| Get the connection status of the x input port, x=0~4(0=all)| HDMI IN1: connect
r link out y!| Get the connection status of the y output port, y=0~4(0=all)| HDMI OUT1: connect
s reset!| Reset to factory defaults| Reset to factory defaults System Initializing…

Initialization Finished!

s beep z!| Enable/Disable buzzer function,z=0~1(z=0 beep off, z=1 beep on)| beep on / beep off
r beep!| Get buzzer state| beep on / beep off
s lock z!| Lock/Unlock front panel button,z=0~1(z=0 lock off,z=1 lock on)| panel button lock on panel button lock off
r lock!| Get panel button lock state| panel button lock on/off
s save preset z!| Save switch state between all output port and the input port to preset z，z=1~8| save to preset 1
s recall preset z!| Call saved preset z scenarios，z=1~8| recall from preset 1
s clear preset z!| Clear stored preset z scenarios,z=1~8| clear preset 1
---|---|---
r preset z!| Get preset z infomation, z=1~8| video/audio crosspoint
s baud rate xxx!| Set the serial port baud rate of RS02 module, z=(115200,57600,38400,19200,9600,4800)| Baudrate:115200
r baud rate!| Get the serial port baud rate of RS02 module| Baudrate:115200
s id z!| Set the control ID of the product, z=000~999| id 888
Output Setting
s in x av out y!| Set input x to output y，x=1~4，y=0~4(0=all)| input 1 -> output 2

r av out y!

|

Get output y signal status y=0~4(0=all)

| input 1 -> output 1

input 2 -> output 2

……

input 4 -> output 4

s out y stream z!| Set output y stream on/off, y=0~4(0=all) z=0~1 (0:disable,1:enable)| Enable out 1 stream Disable out 1 stream
r out y stream!| Get output y stream status, y=0~4(0=all)| Enable out 1 stream
s hdmi y scaler z!| Set hdmi output y port output scaler mode, y=0~4 (0=all), z=1~3(1=bypass,2=4k->1080p,3=Auto)| hdmi 1 set to bypass mode
r hdmi y scaler !| Get hdmi output y port output mode y=0~4(0=all)| hdmi 1 set to bypass mode
s hdmi y hdcp z!| Set hdmi output y port hdcp status y=0~4(0=all) z=0~1(1=active,0=off)| hdmi 1 hdcp active
r hdmi y hdcp!| Get HDCP status of HDMI out y, y=0~4(0=all)| hdmi 1 hdcp active
Audio Setting
s hdmi y arc z!| Turn on/off arc of HDMI output y ，y=0~4(0=all) z=0~1(z=0,off,z=1 on)| hdmi output 1 arc on hdmi output 1 arc off
r hdmi y arc!| Get the arc state of HDMI output y，y=0~4(0=all)| hdmi out1 arc on
EDID Setting
r edid in x!| Get EDID status of the input x, x=0~4(0=all inputs)| IN1 EDID: 4K2K60_444,

Stereo Audio 2.0

IN2 EDID: 4K2K60_444,

Stereo Audio 2.0

IN3 EDID: 4K2K60_444,

Stereo Audio 2.0

IN4 EDID: 4K2K60_444,

Stereo Audio 2.0

r edid data hdmi y!| Get the EDID data of the hdmi output y port, y=1~4| EDID : 00 FF FF FF FF FF

FF 00 ………

s edid in x from z!

| Set input x EDID from default EDID z, x=0~4(0=all),z=1~23

1、1080p,Stereo Audio 2.0

2、1080p,Dolby/DTS 5.1

3、1080p,HD Audio 7.1

4、1080i,Stereo Audio 2.0

5、1080i,Dolby/DTS 5.1

6、1080i,HD Audio 7.1

7、3D,Stereo Audio 2.0

8、3D,Dolby/DTS 5.1

9、3D,HD Audio 7.1

10、4K2K30_444,Stereo Audio 2.0

11、4K2K30_444,Dolby/DTS 5.1

12、4K2K30_444,HD Audio 7.1

13、4K2K60_420,Stereo Audio 2.0

14、4K2K60_420,Dolby/DTS 5.1

15、4K2K60_420,HD Audio 7.1

16、4K2K60_444,Stereo Audio 2.0

17、4K2K60_444,Dolby/DTS 5.1

18、4K2K60_444,HD Audio 7.1

19、4K2K60_444,Stereo Audio 2.0 HDR

20、4K2K60_444,Dolby/DTS 5.1 HDR

21、4K2K60_444,HD Audio 7.1 HDR

22、USER1

23、USER2

24、Copy_From_Hdmi_Tx_1 25、Copy_From_Hdmi_Tx_2 26、Copy_From_Hdmi_Tx_3 27、Copy_From_Hdmi_Tx_4

|

IN1 EDID:1080p,Stereo Audio 2.0

---|---|---
Network setting

r ipconfig!

|

Get the Current IP Configauration

| IP Mode: Static, IP: 192.168.1.72

Subnet Mask: 255.255.255.0,

Gateway: 192.168.1.1

Mac address: 00:1C:91:03:80:01 TCP/IP port=8000, telnet port=10

r mac addr!| Get network MAC address| Mac address: 00:1C:91:03:80:01

s ip mode z!

|

Set network IP mode to static IP or DHCP, z=0~1 (z=0 Static, z=1 DHCP )

| Set IP mode:Static. Please use “s net reboot!”

command or repower device to apply new config!

r ip mode!| Get network IP mode| IP mode: Static

s ip addr xxx.xxx. xxx.xxx!

|

Set network IP address

| Set IP address:192.168.1.100 Please use “s net reboot!” command or repower device to apply new config! DHCP on, Device can’t config static address, set DHCP off first.
r ip addr!| Get network IP address| IP address:192.168.1.100
---|---|---

s subnet xxx.xxx. xxx.xxx!

|

Set network subnet mask

| Set subnet Mask:255.255.255.0 Please use “s net reboot!” command or repower device to apply new config!

DHCP on, Device can’t config subnet mask, set DHCP off first.

r subnet!| Get network subnet mask| Subnet Mask:255.255.255.0

s gateway xxx.xxx. xxx.xxx!

|

Set network gateway

| Set gateway:192.168.1.1 Please use “s net reboot!” command or repower device to apply new config! DHCP on, Device can’t config gateway, set DHCP off first.
r gateway!| Get network gateway| Gateway:192.168.1.1
s tcp/ip port x!| Set network TCP/IP port (x=1~65535)| Set tcp/ip port:8000
r tcp/ip port!| Get network TCP/IP port| tcp/ip port:8000
s telnet port x!| Set network telnet port(x=1~65535)| Set telnet port:23
r telnet port!| Get network telnet port| telnet port:23

s net reboot!

|

Reboot network modules

| Network reboot… IP Mode: Static IP: 192.168.1.72

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Mac address: 00:1C:91:03:80:01 TCP/IP port=8000

telnet port=10

Note that you can send ‘RS232 command’ to control the Switcher via Serial Command tool. The ‘Function description’ explains function about the command. The “Feedback” displays whether the command sends success or not and feedback the information you need to.

Application Example

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>