NAUTICA UCCHP03-01 Wireless Headphone User Manual

NAUTICA UCCHP03-01 Wireless Headphone

Product Information

Specifications

• Model: Nautica UCCHP03 H90
• Bluetooth Version: 4.2
• Wireless Range: Up to 33 Ft / 10 m
• Charging Port: Type-C
• Input: AUX

Product Description
The Nautica UCCHP03 Bluetooth Stereo Headphones H90 are designed to provide high-quality audio performance while combining technology and stylish design for everyday use.

Safety Information

• Do not wear headphones while showering, bathing, or engaging in water sports.
• Avoid using headphones while driving or cycling for traffic safety.
• Keep headphones away from children due to small parts that may be hazardous.
• Do not use headphones near a pacemaker (within 33ft / 10m).
• Stop using the product if it causes discomfort or pain.

Package Content

• Bluetooth Stereo Headphones
• TYPE-C Charging Cable
• AUX Cable
• User Manual
• Operational Guide

Product Usage Instructions

Bluetooth Pairing

1. Maintain a distance of up to 33 Ft / 10 m between headphones and your device.
2. Power on the headphones to enter Bluetooth pairing mode with blue and red LED indicators flashing.
3. In your phone’s Bluetooth settings, search for “Nautica H90” and connect. Password is 0000 if prompted.
4. Upon successful connection, the blue light will flash slowly.

Reconnect Bluetooth: Long press M when powered on to connect or disconnect from the device.

Charging Instructions

1. Connect the Type-C cable to the right earcup of the headphones.
2. Plug the other end of the cable into a powered wall charger or computer.
3. Note: Headphones do not play audio while charging. Red light indicates charging and turns off when fully charged.

Wired Listening Mode

1. Power off the headphones.
2. Insert the AUX cable into the connector on the right earcup.
3. Connect the other end of the cable to your non-wireless device.

Maintenance
Avoid overusing or exerting heavy pressure on the headphones.
Keep them away from wet and hot environments to ensure longevity.

FAQ

1. Q: How do I know when the headphones are fully charged?
   A: The red light on the headphones will turn off after they are fully charged.

2. Q: Can I use the headphones while they are charging?
   A: No, the headphones do not play audio while charging for safety reasons.

Thank you for purchasing an original Nautica UCCHP03 Bluetooth Stereo Headphones H90.
You are getting a high quality product that’s built to combine technology and design for your everyday use.
Please read the below info carefully to get the most out of your new product.
For more detailed info on care, use and warranty, please visit technofashion.com.

Safety Information

• Before you use the device, read the following precautions carefully to ensure optimal product performance.
• Use of headphones will impair your ability to hear other sounds. Use caution while using your headphones when you are engaging in any activity that requires your full attention.
• This package contains small parts that may be hazardous to children and should be kept out of reach of children.
• This product is not a toy – never allow children to play with this product. Always store the product out of reach of children.
• None of the components can be replaced or repaired by users. Only authorized dealers or service centers may disassemble the product.
• If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
• Do not wear headphones while showering, bathing or when participating in water sports.
• To guarantee your personal safety, please do not wear or keep headphones in the vicinity (closer than 33ft / 10m ) of a pacemaker.
• Headphones listening at high volume levels – especially over extended periods of time – may damage your hearing.
• For traffic safety, do not use headphones while driving or cycling.
• Heed all warnings on the product and in the operation instructions.
• Stop using this product immediately if it causes discomfort or pain.

Product Description

1. AUX Input
2. Type-C Charging Input
3. LED Indicators
4. Bluetooth Connection Button

Package Content

Operational Guide

Power On:
Long press Play/Pause button to power ON

Power Off:
Long press Play/Pause button to power OFF

Volume control:

• Short press + : Increase volume
• Short press – : Decrease volume

Music control:

• Long press + : Play next track
• Long press – : Play previous track
• Short press Power Button : Start / Stop track

Answering a call:
When there is an incoming call to your mobile phone, the headphone will ring, short press Power button to answer the incoming call

Ending a call:
Short press Power button  while call in progress

Rejecting a call:
Long press Power button while the headphones are ringing

Call back last number:
Double press to Power button to call back last number

Bluetooth Pairing

1. Keep the distance between your headphones and mobile phone (or other devices) within 33 Ft / 10 m.
2. Power on the headphone and it will automatically turn to Bluetooth pairing mode. The LED indicator will flash in blue and red.
3. Search in your phone’s Bluetooth menu with the product name Nautica H90
4. When the phone searches forNauticaH 90device name and connect. If prompted for password, the password is 0000.
5. When the wireless connection is successful, the blue light flashes slowly.

Reconnect Bluetooth:
When powered on, long press M to connect or disconnect to the device.

Charging Instructions

1. Plug the small end of the Type-C cable into the Type-C connector on the right earcup.
2. Plug the other end of the Type-C cable into a wall charger or computer that is powered on.

Important: The headphones do not play while charging. red light will be on long when charging, and will be off after fully charging.

Wired Listening Mode
Use the AUX cable to connect a non – wireless device to the headphones.

1. Power off the headphones.
2. Insert AUX cable into the connector on the right earcup.
3. Insert the other end of the cable into the connector on your device.

Specifications

• Bluetooth Version: v5.3+EDR
• Play Time: Up to 4 hours
• Charging Time: 1 hours
• Standby Time: 180 hours
• Battery Capacity: 200 mAh
• Speaker Drivers: 1.57 in / 40 mm
• Wireless Range: Up to 33 ft / 10 m
• Input Voltage: 3.7V
• Impedance: 32 Ω
• Frequency Response: 20Hz – 20kHz
• Sensitivity: 110dB ±3 dB
• Dimensions: 631/64 x 35/32 x 631/32 in
• Charging Input: Type-C

LED Behaviours

• Power On: Blue light
• Pairing: Blue and red light flashes
• Charging: Red light
• Connect: Light off
• Power Off: Red light

Maintenance

Please do not overuse the headphones or put them under heavy pressure. Keep away from wet and heat.
Exposing the product to extreme hot or cold, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the headphones.
Keep away from router or other high frequency transmitting equipment to prevent interruption of signal receiving.
Please use these headphones under its working range (up to 33 ft / 10 m). Effective range may vary depending on multiple conditions. Power time may differ depending on personal use habits.
Do not dismantle the product. Unauthorized parties may damage the product.
Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
Do not use drastic chemicals or cleaner to clean the product.
Do not use sharp objects to scratch product surface to avoid damaging shell.

Warranty Information

We do our best to make sure that this product is free from defects in materials and workmanship for a period of 1 year.
The following conditions must be met for your warranty claim to be approved:
You must have purchased the product from a Nautica or Technofashion authorized dealer.
You must provide proof as to the date of purchase from the Nautica or Technofashion authorized dealer.
You must have used the product only as intended and in accordance with the product’s care instructions. Within 12 months after the purchase, in case the product is determined to be defective (at the date of original purchase) due to improper materials or workmanship, you are entitled to free repair or exchange of goods. The product should be returned to Technofashion.
The warranty does not cover defects caused by third-party modifications, repairs or replacement parts.
Punctures, scratches, normal wear and tear and the natural breakdown of colors and materials over extended time and use are not warranted. Warranty applies to the USA only.
We will make every effort to replace limited edition or discontinued products but cannot guarantee availability for replacement.  Any limited edition or discontinued product still under its applicable warranty that cannot be replaced with an identical product will be replaced with the equivalent model based on availability.
We may make changes to products and designs in the time you purchased your product and submitted a warranty claim.
Products repaired or replaced under this warranty may or may not incorporate these changes.

Support

For any questions, email us at support@technofashion.com

FCC ID: 2AZBO-N00033
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found complying with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Designed, manufactured, distributed by

© Technofashion, Inc. All Rights Reserved. Designed in USA. Made in China.

References

• Techno Fashion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>